Philips RSAT 2 Referenzhandbuch

RSAT 2

Remote Control Panel

Customer‘s Manual

BTS Media Solutions GmbH

Brunnenweg 9

D-64331 Weiterstadt, Germany

P.O. Box 1165

Tel: +49 (0) 6155-870-0

Fax: +49 (0) 6155-870-300

Web Sites

Internet: www.thomsonbroadcast.com

www.imagingsystems.de

Intranet: www.weiterstadt.thmulti.com

Information in this document is subject to change without notice.

This document and any updates and/or supplemental information, including any copies thereof, cannot be reproduced, neither

communicated to a third party, without written authorization from THOMSON multimedia Broadcast Solutions.

Please notify THOMSON multimedia Broadcast Solutions of any errors in this document. We also would appreciate any comments

you have to improve this manual.

Copyrights

Published by

All product names mentioned in this manual are the trademarks of their respective owners.

Trademarks

Before reading the entire

manual, please check for any

supplements at the end

of the manual.

Item Rev Date Serial

No Pages

affected Volume/Contents Remarks

1 0 07.2000 100 All Customer‘s Manual First Issue

2 1 11.2001 chapter 6 Oberating Instructions Macros

Remote Panel RSAT 2

Revision Report

Documentation Order Number Customer’s Manual

RU 0065, 000 351 763 000

Remote Panel RSAT2 Contents

Operating Instructions - Rev. 1 / 11.2001

CONTENTS Page

Revision Report

1. General 1

1.1 Application examples 1

1.2 Control and display elements 1

2. Technical Data 3

3. Installation and Start-up 5

3.1 Safety Instructions 5

3.2 Mounting the Remote Control Panel RSAT2 6

3.3 Rack Mounting 8

3.4 Connecting to the DD35 control panel 10

3.5 Port re-configuration RS-422 / RS-232 11

4. Operation 13

4.1 How to start the Satellite Panel 13

4.2 How to learn a new function 14

4.3 What can be learned 15

4.4 Loading and saving setups 16

4.5 RSAT2 Makros and Control Panel M/E Delegation 19

5. Setup / Tests 22

6. Annex 24

6.2 Default Macros 25

Remote Panel RSAT2

Contents

II Operating Instructions - Rev. 1 / 11.2001

Remote Control Panel RSAT2 1. General

Operating Instructions - Rev. 1 / 11.2001 1

1. GENERAL

The remote control panel RSAT2 is used for copying button functions of the DD35

main operation panels for control of mixer functions from another workplace.

Connected to DD35 main panel via RS-422 cable which can be ordered optionally.

When the learn mode is applied single button functions also the built in Digipots and

the Fader can be trained with functions of the DD35 main panel –

Standard predefined settings for single M/E operation are also availlable.

1.1 APPLICATION EXAMPLES

Remote control on source selection, effects register recall, transitions, macros,

Shot-Box, Keyer adjust ...., specifically in conjunction with the use of an additional

sidepanel control PC.

Fig. 1: RSAT2 Remote Control Panel

1.2 CONTROL AND DISPLAY ELEMENTS

3 x16 button source selection busses with 4 digit displays

Transition control field with fader

4x Digipots

4x Delegation buttons

Learn mode buttons with Display

2x Menu control buttons (Step up/down)

22 additionally programmable buttons

In learn mode only one function per button or digipot is programmable. Delegation

functions are not available. Also, functions of the display panel RPV are not recor-

dable.

Remote Control Panel RSAT11. General

2Operating Instructions - Rev. 1 / 11.2001

The programmable memory of the RSAT2 is part of the DD35. Thus the program-

med function set for the RSAT2 buttons can be switched from application to appli-

cation. More complex button sequences can be achieved by programmed recall of

macro buttons of the DD35 main panel.

The standard unit is equipped with 1x reconfigurable 9 Pin D-Sub interface for con-

nection to a host processor. Without further options the factory configuration is a

RS-422/485 port for direct connection to DD35’s panel controller.

Remote Control Panel RSAT2 2. Technical Data

Operating Instructions - Rev. 1 / 11.2001 3

2. TECHNICAL DATA

Mechanics Width: 240 mm, Length: 464 mm, Depth: 115 mm

Weight: 5 kg

Desk cut out: 441 x 217 mm

Optional 19”Mounting frame

Voltage supply Line voltage: 100 V –240 V $10 %, autosense

Line current: 0.8 A

Line frequency: 50 Hz to 60 Hz

Wide AC range power supply block

Power consumption: < 50 W

Environmental Operating temperature: +0°C ... 40°C

requirements Storage/transport temp: –40°C ... 85°C

Humidity: v95%, DIN IEC 68-2-14

non-condensing

Electromagnetic EMA: EN 55103-1, EN 55 022, Class B,

compability ESD: EN 61000-4-2

EMI: EN 61000-4-3

Burst: EN 61000-4-4 , IEC 1000-4-4

RF immunity: EN 61000-4-6

Safety VDE 0805, EN 60 950

Interface RS-422/485 port for direct connection to the DD35 panel controller.

9pin D-sub, female. Port re-configurable for RS-232.

Communication is asynchron with 38.4 kbaud, 1 start, 8 data, no parity, 1 stop bit.-

A factory re-configuration is recommended for use of an RSAT2 with a PC.

Standard Accessories Accessory pack with tools fuses and button spare parts.

Options 19”Mounting frame für rack mounting.

Order no.: RC 2326, 000 351 762 600

Remote Control Panel RSAT22. Technical Data

4Operating Instructions - Rev. 1 / 11.2001

Remote Control Panel RSAT2 3. Installation and Startup

Operating Instructions - Rev. 1 / 11.2001 5

3. INSTALLATION AND STARTUP

3.1 SAFETY INSTRUCTIONS

Caution!

These instructions are for use by qualified personnel only. To reduce the risk

of electric shock, do not perform any installation other than that contained in

the Operating Instructions unless you are qualified to do so.

Refer all servicing to qualified service personnel.

Attention!

Electrostatic sensitive devices on the p. c. boards. Observe the following

precaution for handling:

Handling or mounting the RSAT2 unit call for special attention to personal

safety. Personnel should be connected to ground potential via a wristlet (e.g.

3M Wristlet Serial 2200).

Do not touch the p. c. boards during mounting.

Repair the p. c. boards only at static-safe work stations.

Use antistatical protective bags when carrying the p.c. boards.

Inhaltsverzeichnis

Andere Philips Bedienfeld Handbücher

Philips

Philips RC9800I Bedienungsanleitung

Philips

Philips Pronto TSU9400 Sicherheitsleitfaden

Philips

Philips RC9800I Bedienungsanleitung

Philips

Philips Pronto TSU9400 Bedienungsanleitung

Philips

Philips Pronto TSU9800 Sicherheitsleitfaden

Philips

Philips 6400 series Bedienungsanleitung

Philips

Philips LRC2410 Bedienungsanleitung

Philips

Philips Pronto TSU9600 Bedienungsanleitung

Philips

Philips Color Kinetics Power/Data Supply SPDS-60CA... Bedienungsanleitung

Philips

Philips Pronto Bedienungsanleitung

Philips

Philips Pronto TSU9600/79 Bedienungsanleitung

Philips

Philips SBCRU960/05 Bedienungsanleitung

Philips

Philips 9290 014 70180 Bedienungsanleitung

Philips

Philips RC9800I/00 Bedienungsanleitung

Philips

Philips Antumbra Bedienungsanleitung

Philips

Philips Color Kinetics Power/Data Supply SPDS-60CA... Bedienungsanleitung

Philips

Philips SBCRU1000 Bedienungsanleitung

Philips

Philips sPDS-60ca Bedienungsanleitung

Philips

Philips RC9800I Bedienungsanleitung

Philips

Philips SBCRU1000/05 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten

Truma

Truma CP plus Bedienungsanleitung