Philips Selecon plcyc1 MKII Bedienungsanleitung

For PLCYC1MKII

Philips Selecon Offices

The material in this manual is for information purposes only and is subject to change without notice. Philips

Selecon assumes no responsibility for any errors or omissions which may appear in this manual. For comments and

suggestions regarding corrections and/or updates to this manual, please visit the Philips Selecon web site at

www.seleconlight.com or contact your nearest Philips Selecon office.

El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Philips

Selecon no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia

o corrección con respecto a este manual, favor de dirijirlo a la oficina de Philips Selecon más cercana.

Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Philips

Selecon uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für

Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder

Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Philips Selecon-

Niederlassung aufzunehmen.

Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La

compagnie Philips Selecon n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel.

Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'il

vous plait contacter le bureau de Philips Selecon le plus proche.

Note: Information contained in this document may not be duplicated in full or in part by any person without prior written

approval of Philips Selecon. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The

use of this document for all other purposes is specifically prohibited.

Document Number: 02.9701.2002

Version as of: 30 July 2015

PLCYC1 MKII LED Luminaire QuickStart Guide

Philips Selecon - Dallas

10911 Petal Street

Dallas, TX 75238

Tel: +1 214-647-7880

Fax: +1 214-647-8030

Philips Selecon - Auckland

19-21 Kawana Street

Northcote, Auckland 0627

New Zealand

Tel: +64 9 481 0100

Fax: +64 9 481 0101

Philips Selecon - Asia Limited

Unit C, 14/F, Roxy Industrial Centre

No. 41-49 Kwai Cheong Road

Kwai Chung, N.T., Hong Kong

Tel: +852 2796 9786

Fax: +852 2798 6545

Philips Selecon - Europe

Rondweg zuid 85

Winterswijk 7102 JD

The Netherlands

Tel: +31 (0) 543-542516

Website:

www.seleconlight.com

PLCYC1 MKII LED Luminaire QuickStart Guide

TABLE OF CONTENTS

Philips Selecon Offices ....................................................................................................... Inside Front Cover

TABLE OF CONTENTS

IMPORTANT INFORMATION

Warnings and Notices ..................................................................................................................................... 2

Additional Resources for DMX512 ................................................................................................................ 2

Philips Selecon Limited Three-Year Warranty............................................................................................... 2

PREFACE

About this Guide..................................................................................................................................................... 3

Product Descriptions .............................................................................................................................................. 3

INSTALLATION AND SET UP

Power Requirements............................................................................................................................................... 4

Connecting Power .................................................................................................................................................. 5

Connecting to the DMX512 Network .................................................................................................................... 6

Mounting ................................................................................................................................................................ 7

Luminaire Spacing .......................................................................................................................................... 7

Tilt Adjustments ..................................................................................................................................................... 8

OPERATION AND PROGRAMMING

LCD Menu Operation............................................................................................................................................. 9

LCD Menu System ................................................................................................................................................. 9

Security................................................................................................................................................................. 10

Locking Fixture ............................................................................................................................................. 10

Presets................................................................................................................................................................... 11

Editing Preset Names .................................................................................................................................... 11

Settings ................................................................................................................................................................. 11

TROUBLESHOOTING

Troubleshooting Guide ......................................................................................................................................... 13

QuickStart Guide PLCYC1 MKII LED Luminaire

2IMPORTANT INFORMATION

IMPORTANT INFORMATION

Warnings and Notices

Additional Resources for DMX512

For more information on installing DMX512 control systems, the following publication is available for purchase

from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide

for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:

USITT

315 South Crouse Avenue, Suite 200

Syracuse, NY 13210-1844

Phone: 1.800.938.7488 or 1.315.463.6463

www.usitt.org

Philips Selecon Limited Three-Year Warranty

Philips Selecon offers a three-year limited warranty of its luminaires against defects in materials or workmanship

from the date of delivery. A copy of Philips Selecon three-year limited warranty containing specific terms and

conditions can be obtained from the Philips Selecon web site at www.seleconlight.com or by contacting your local

Philips Selecon office.

When using electrical equipment, basic safety precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. Do not use outdoors.

c. Do not mount near gas or electric heaters.

d. Equipment should be mounted in locations and at heights where it will not readily be subjected to

tampering by unauthorized personnel.

e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe

condition.

f. Do not use this equipment for other than intended use.

g. Refer service to qualified personnel.

SAVE THESE INSTRUCTIONS.

WARNING: You must have access to a main circuit breaker or other power disconnect device

before installing any wiring. Be sure that power is disconnected by removing fuses or turning the

main circuit breaker off before installation. Installing the device with power on may expose you to

dangerous voltages and damage the device. A qualified electrician must perform this installation.

WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to

use proper cable can result in damage to equipment or danger to personnel.

WARNING: This equipment is intended for installation in accordance with the National Electric

Code® and local regulations. It is also intended for installation in indoor applications only. Before

any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid

shock or damage to the control. It is recommended that a qualified electrician perform this

installation.

About this Guide 3

PLCYC1 MKII LED Luminaire QuickStart Guide

PREFACE

1. About this Guide

This Quickstart Guide is intended for a knowledgeable user to unpack, install, and use the PLCYC1 MKII LED

Luminaire in a short time period. For the complete manual in PDF format, please visit our web site at:

www.seleconlight.com and click the user manual download link on the product page. The complete manual provides

you all information related to accessories, menu structures, DMX channel mapping/modes, and care for your new

luminaire.

Please read all instructions before installing or using this product. Retain this guide for future reference. Additional

product information and descriptions may be downloaded at www.seleconlight.com.

2. Product Descriptions

The document provides installation and operation instructions for the following products:

• PLCYC1 MKII LED Luminaire (PLCYC1MKII)

Note: All PLCYC1 MKII LED Luminaires are universal voltage (100VAC to 240VAC, Auto-ranging).

QuickStart Guide PLCYC1 MKII LED Luminaire

4INSTALLATION AND SET UP

INSTALLATION AND SET UP

1. Power Requirements

WARNING! The PLCYC1 MKII LED Luminaire should be connected to a constant circuit or a relay device. It

should never be connected to a dimmer or circuit controlled by a dimmer.

The PLCYC1 MKII LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire

contains an auto-ranging power supply. Depending on supply voltage, each luminaire can draw up to 140 Watts. The

maximum through current should not exceed 20 Amps*.

WARNING! *Maximum Allowable Input Current of 20 Amps (maximum power supply limit of 140 Watts). Do not

overload circuits! Must be supplied by a branch circuit protected by a maximum 20 Amp circuit protector. Doit

être alimenté par un circuit de dérivation protégé par un maximum de 20 ampères circuit protecteur. Do not

overload circuits!

IMPORTANT AC POWER CONNECTION NOTES:

a. Must be supplied by a branch circuit protected by a maximum 20 Amp

circuit protector. Doit être alimenté par un circuit de dérivation protégé

par un maximum de 20 ampères circuit protecteur.

b. When using the daisy-chain connection method, ONLY connect PLCYC1

MKII LED Luminaires to AC Output Connection of PLCYC1 MKII LED

Luminaires. DO NOT CONNECT OTHER TYPES OF LUMINAIRES

OR DEVICES!

c. Use only approved cable types.

d. Do not overload circuits!

e. Do not connect PLCYC1 MKII LED Luminaires to dimmed circuits.

f. The MAXIMUM allowable number of PLCYC1 MKII LED Luminaires

which can be 'daisy-chained' on one power feed should not exceed

ratings. DO NOT EXCEED!

Connecting Power 5

PLCYC1 MKII LED Luminaire QuickStart Guide

2. Connecting Power

Note: Refer to Figure 1 for AC Input and Output connections.

Figure 1: AC Input and Output Connections

If the unit is supplied with an AC input cable, Table 1 describes how to connect power to your PLCYC1 MKII LED

Luminaire. Field wiring of the PLCYC1 MKII LED Luminaire is straight forward. A total of 3 wires/conductors need

to be brought to the unit. The following wiring scheme is required:

Table 1: PLCYC1 MKII LED Luminaire AC Input

Connections

Wire Color Purpose

Brown Main / Line (120 to 240VAC)

Blue Neutral

Green/Yellow Ground

AC Input Connection AC Output

Connection

(to next luminaire,

optional)

Neutral Main /

Ground / Earth

Line

AC Input Connector

(on back of unit)

QuickStart Guide PLCYC1 MKII LED Luminaire

6INSTALLATION AND SET UP

3. Connecting to the DMX512 Network

Note: Refer to Figure 2 for DMX512 Input and Output/Thru connections.

Basic DMX512 installation consists of connecting multiple PLCYC1 MKII LED Luminaires together (up to 30

luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX

connector on the first PLCYC1 MKII LED Luminaire. Another cable runs from the other DMX connector on the first

unit to a DMX connector on the next PLCYC1 MKII LED Luminaire (or DMX512 device to be controlled)

Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on

page 2. For PLCYC1 MKII LED Luminaire DMX Mapping, refer to the product user’s manual.

Figure 2: Connecting DMX512

DMX512

DMX512 (out from first

to second luminaire)

DMX512 (out to the next luminaire or DMX512

controlled device)

PLCYC1 MKII LED Luminaires

(from console or

control device)

DMX512 Connections

Data Thru

Cable Pinout

Male Conn

Pin 1

Common

(Drain)

Pin 2

Data (-)

Pin 3

Data (+)

Pin 4

Not Used

Pin 5

Not Used

Data In

Cable Pinout

Female Conn

Mounting 7

PLCYC1 MKII LED Luminaire QuickStart Guide

4. Mounting

PLCYC1 MKII LED Luminaires offer a plastic monocoque yoke design for mounting by theatrical clamps or hooks

(sold separately).

WARNING! Before attempting any installation or service, disconnect all power at power source. Turning off the

output of the luminaire does not disconnect power. Installation and service should only be performed by a trained and

qualified professional. Be sure to check circuit capacity before installing luminaires.

Figure 3: PLCYC1 MKII LED Luminaire Hanging / Spacing

SAFETY CABLE: FOR LUMINAIRE, a safety cable (included with unit) is recommended

for all hanging installation and may be required by national and local codes. Attach safety

cable to luminaire and to structure.

Luminaire Spacing

For optimum performance and use, PLCYC1 MKII LED Luminaires should be mounted and spaced as shown in

Figure 3.

How to read Figure 3:

• S = Spacing between fixtures

• D = Distance from fixture to projection surface.

• A ratio of S = D x 0.9 is the formula used to calculate the optimum spacing for these fixtures.

PLCYC1 MKII LED Luminaires

QuickStart Guide PLCYC1 MKII LED Luminaire

8INSTALLATION AND SET UP

5. Tilt Adjustments

To adjust luminaire tilt position:

Step 1. As shown in Figure 4, at tilt locking handle, loosen handle by twisting to the left.

Figure 4: Tilt Adjustments

Step 2. Position tilt (up or down) luminaire head assembly as desired.

Step 3. Hand-tighten, but do not over tighten, tilt locking handle.

Tilt Locking

Yoke Assembly

Luminaire

Head Assembly

Handle

R 5.7 in. /

143.5 mm

R 7.7 in. /

195.0 mm

1.2 in. /

30.2 mm

6.7 in. /

170.5 mm

9.5 in. /

240.4 mm

Andere Handbücher für selecon plcyc1 MKII

Inhaltsverzeichnis

Andere Philips Scheinwerfer Handbücher

Philips

Philips Tempo 3 RVP351 Series Bedienungsanleitung

Philips

Philips P-5557-B Bedienungsanleitung

Philips

Philips HADCO WAMT14-H Bedienungsanleitung

Philips

Philips BVP510 Benutzerhandbuch

Philips

Philips BVP483 Bedienungsanleitung

Philips

Philips BVP158 Bedienungsanleitung

Philips

Philips BVP151 Bedienungsanleitung

Philips

Philips conTempo RVP150 Bedienungsanleitung

Philips

Philips BVP500 Benutzerhandbuch

Philips

Philips 31607-48-16 Montageanleitung

Philips

Philips SL ParBlazer 100 UV Bedienungsanleitung

Philips

Philips Clearflood Large BVP651 Bedienungsanleitung

Philips

Philips GearUnits ECM 330 Bedienungsanleitung

Philips

Philips MVF 406, 1800 W cat A1 Kurzanleitung

Philips

Philips Showline SL PAR 150 ZOOM Bedienungsanleitung

Philips

Philips BVP150 Bedienungsanleitung

Philips

Philips HADCO WAMT14 Bedienungsanleitung

Philips

Philips SmartBright BVP171 Bedienungsanleitung

Philips

Philips EH313L Bedienungsanleitung

Philips

Philips BVP158 LED24/WW NW CW PSU 20W SWB CN Bedienungsanleitung

Philips

Philips OptiVision LED Benutzerhandbuch

Philips

Philips HNF901 Benutzerhandbuch

Philips

Philips SL WASH 180 RGBW Bedienungsanleitung

Philips

Philips VARI-Lite VL4000 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung

Philips selecon plcyc1 MKII Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken