Philips SHK4000 Bedienungsanleitung
SHK4000
User Manual
Register your product and get support
www.philips.com/support
EN 1
Table of Contents
1 2
2
2
3
3
3
4
2 Bluetooth Wireless Headphone
Box Contents
Other Devices
3 5
5
5
Pairing Headphone with Your
Phone
4 6
6
6
7
5 8
6 9
9
9
9
10
7
11
English
Precautions
Hearing Safety
General Information
Bluetooth Wireless Headphone
Overview
Getting Started
Charging the Headphone
Call and Music Management
Wearing the Headset
Connecting Headphone
to Bluetooth Device
Disposal of Old Products
and Batteries
Using the Headphone
Technical Specication
Declaration of Conformity
EMF Compliance
Trademarks
Precaution
Frequently Asked Questions
(FAQs)
Do not use any detergent containing alcohol,
ammonia, benzene or abrasives.
If cleaning is necessary, use a soft cloth slightly
moistened with water or diluted soapy water to
clean the product.
Do not expose the built-in battery to excessive
heat such as sunlight, re, etc.
There is a risk of explosion if the battery is
incorrectly inserted. Replace only with the same
battery or battery of the same type.
To avoid hearing damage, reduce the time you
use the headphone at high volume and set the
volume to a safe level. The louder the volume,
the shorter the safe listening time is.
Wearing the headphone on both ears
while driving is not recommended
and is illegal in some areas.
For your safety, do not distract your
attention from music or phone call
while driving or in other hazardous
environments.
Excessive sound pressure from the
earphone and headphone may
damage your hearing.
Use with caution and temporarily stop
using it in a potentially dangerous situation.
Do not turn up the volume so high that
you can't hear what's around you.
Do not keep the volume up just because
your hearing adapts to a high volume.
Listen at the right volume for the right
amount of time.
2 EN
1 Precautions
Hearing Safety
Danger
•
•
•
•
•
•
•
•
General information
To prevent damage or malfunction:
Caution
•Do not expose the headphone to excessive heat.
•Do not drop the headphone.
•Do not drop or splash water on the headphone.
•Do not soak the headphone in water.
•
•
•
•
•
•
Be sure to observe the following
guideline when using your headset.
The operation and storage temperatures
may be between 0ºC (5ºF) and 55ºC
(131ºF) (up to 90% relative humidity).
Battery life may get shorter in the
environments of high or low
temperature.
Operating and Storage Temperature/
Humidity Information
2
• Convenient Wireless hands-free call
• Wireless music listening and control
• Switch between call and music
Box Contents
USB Charging Cable
Quick Start Guide
Other Devices
English
Bluetooth
Wireless
Headphone
Thank you for purchasing a Philips
product! Register your product at
www.philips.com/welcome to get
support from Philips.
With Philips wireless headphone, you
may have
Compatible with mobile phones or
devices (laptops, PDAs, Bluetooth
adapters, MP3 players, etc.) that support
Bluetooth and devices equipped with
other Bluetooth version ( see ‘Technical
Specication’ on page 8).
Phillips Bluetooth Wireless Headphone
SHK4000
EN 3
a Volume/Track control
b
• Headset Power
•
c Microphone
d Charging slot
Play/Pause/Answer Call/Hang
Up/Redial/Reject
Bluetooth Wireless
Headphone Overview
4 EN
3 Getting Started
Charging the Headphone
Warning
•
•
•
Useful Tip
•It takes three hours to have the devicefully charged.
1
2
3
4
1
2
Settings
Select
Back
Connectivity
Enter Password
****
0000
Settings
Bluetooth
Select Back
Connectivity
Add
Bluetooth
device
Settings
Devices Found
Select Back
10:36
Philips SHB6000
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select Back
10:36
Philips SHK4000
English
Before using the headphone for the rst time, charge
the battery for about 4 hours for optimum battery
capacity and life.
Use only the genuine USB charging cable to avoid
any damage.
While charging your headphone, the power goes
o, so complete the call before charging.
Connect the headset to a powered on
USBport with a USB charging cable.
The LED turns white during the
charge and turns o when charging
is complete.
The rst time you use the headphone with
your phone, you must pair them.
If pairing is successful, you will have a
unique password link between the
headphone and your phone. The eight
most recently used devices are stored in the
memory. If you try to make pairing after the
eight devices have already been paired, the
new device replaces the rst paired one.
Make sure the headphone is fully
charged and powered o.
Make sure the phone is turned on
and the Bluetooth function is
enabled.
Have the headphone paired with
your phone. See your phone user
manual for more information.
The headphone remains in
pairing mode for ve minutes.
The following example shows how to pair
the headphone with your phone.
Enable the Bluetooth function on your
phone and select Philips SHB4405.
When being prompted for the headset
password, enter "0000" (four zeros).
If your phone supports Bluetooth
2.1+EDR or higher, you don’t need to
enter a password.
Pairing Headphone with
Your Phone
EN 5
Press and hold the button for
about six seconds until it ashes in
blue and red by turns.
One short
beep
One short
beep
4
1
2
The blueLED blinks.
Useful Tip
•
Note
•
Call and Music Management
Press and
hold for
over one
second.
Operation Action
•
•
•
•
Skip.
Rewind.
Make sure the phone is turned on and
the Bluetooth function is enabled.
The headphone will automatically
reconnect to the phone/Bluetooth
device last time you connected. If
the headphone fails to connect to
the last connected device, it
reconnects to the second last
connected device.
Connecting Headphone to
Bluetooth device
If you turn on the phone/Bluetooth device or activate
the Bluetooth function after turning on the headphone,
you must manually reconnect the headphone and the
phone/Bluetooth device.
If the headphone is not connected to a Bluetooth
device within 5 minutes, it is automatically turned
o to save battery.
One blue
blink: Battery
power > 50%
One short
beep
One long
beep
One short
beep
One short
beep
One short
beep
One short
beep
One white
long blink
Sound or LED
indicator
One white
blink: Battery
power < 50%
Redial the
recent phone
number.
Switch the
calling
parties.
Adjust the
volume.
Press +/-
button.
Press and
hold the
plus sign (+).
Press and
hold the
minus sign (-).
One short
beep
Using the
Headphone
Press and hold to turn on the
headset.
Turn on the
headphone.
Turn o the
headphone.
Press and
hold for
over 4
seconds to
wait for the
action.
Press
Play or
Pause the
music.
Answer the
call or hang
up.
Press
6 EN
Reject the
answer.
Press and
hold .
Press
two times.
Long beep
one time
Press
two times.
Other Status and Indicator Lights
Status LED Light
Wearing the Headset
Adjust the headset to your head.
English
The headphone
is connected to a
Bluetooth device
while in standby
mode or you're
listening to music.
The headphone
is on but not
connected to a
Bluetooth
device.
The blue LED blinks
every 6 seconds.
The headphone
is ready for
pairing.
The battery
power is low.
The battery is
fully charged.
The battery is
fully charged.
The LED ashes in
white and blue by
turns.
The blue LED blinks
quickly.
The blue LED blinks
twice every second.
EN 7
The white LED is
blinking.
The white LED is
turned o.
5
• Up to 9 hours for play or call
• Up to 200 hours for standby
•
•
•
• Frequency range: 2.402 - 2.480GHz
• Transmitter output: < 20dBm
• Operation range: Up to 15 meters (50feet)
• Adjustable at folding head band
• Noise blocked by slow noise restoration
• Digital echo/Noise cancellation
• Automatic power o
• Checking out the battery condition
Note
•
Normal time taken for full charge:
3 hours
Bluetooth 3.0, Bluetooth Mono support
(Headset Prole - HSP, Hands-Free
Prole - HFP), Bluetooth Stereo support
(Advanced Audio Distribution Prole -
A2DP, Audio Video Remote Control
Prole - AVRCP)
Technical
Specication
Rechargeable lithium-polymer battery
(200mAh)
The specication is subject to change without
notice.
8 EN
Inhaltsverzeichnis
Andere Philips Kopfhörer Handbücher
Philips
Philips HN100 Bedienungsanleitung
Philips
Philips SHK3020 Bedienungsanleitung
Philips
Philips SHE4501 Bedienungsanleitung
Philips
Philips HC065 Bedienungsanleitung
Philips
Philips SHS4848 Bedienungsanleitung
Philips
Philips SHG8010/00 Bedienungsanleitung
Philips
Philips SHC1300/00 Bedienungsanleitung
Philips
Philips SHS8001 Bedienungsanleitung
Philips
Philips SHB5850 Bedienungsanleitung
Philips
Philips SHS8100 Bedienungsanleitung
Philips
Philips SHD8900/10 Bedienungsanleitung
Philips
Philips SBCHD1505U/00 Bedienungsanleitung
Philips
Philips HS380 series Bedienungsanleitung
Philips
Philips 6000 Series Bedienungsanleitung
Philips
Philips 2000 series Bedienungsanleitung
Philips
Philips SHE3584 Bedienungsanleitung
Philips
Philips SHE9550 Bedienungsanleitung
Philips
Philips SHQ1000 Bedienungsanleitung
Philips
Philips TAH5205 Bedienungsanleitung
Philips
Philips SHN050 Bedienungsanleitung
