Philips GC4590 SERIES Bedienungsanleitung

Always there to help you

Azur Freemotion

GC4590 series

Specifications are subject to change without notice

4239 000 98061

User manual

ENGLISH

n k

2345

7 86

10 11 12 13

14 15 16 17

Azur Freemotion_GC4590 series

ENGLISH 6

РУССКИЙ  14

УКРАЇНСЬКА 23

TÜRKÇE 32

ҚАЗАҚ  40

Important

Read the separate important information leaet and the user manual

carefully before you use the appliance. Save both documents for future

reference.

General description (Fig. 1)

1 Spray nozzle

2 Water lling door

3 Spray button

4 Steam slider

a. Dry setting

b. ECO setting

c. Auto steam setting

5 Steam boost trigger

6 Temperature dial with Auto steam control

7 Water tank

8 Typeplate

9 Calc clean button

10 Soleplate

11 Light ring

12 Base

13 Iron storage lock

14 Mains cord

Using the appliance

Filling the water tank

Note: Your appliance has been designed to be used with tap water. In case

you live in an area with hard water, fast scale build-up may occur.Therefore,

it is recommended to use distilled or de-mineralized water to prolong the

lifetime of your appliance.

Note: Do not add perfume, water from tumble dryer, vinegar, magnetically

treated water (e.g.,Aqua+), starch, descaling agents, ironing aids, chemically

descaled water or other chemicals as they may cause water spitting, brown

staining, or damage to your appliance.

6ENGLISH

ENGLISH

1 Set the steam control to position . (Fig. 2)

2 Fill the water tank up to the MAX indication (Fig. 3).

3 Closethewaterllingdoor.

Selecting temperature and steam setting

Table 1

Fabric type Temperature

setting

Auto steam

control

Steam

boost

Linen MAX Automatically

adjusted to the

optimal amount

Ye s

Cotton ●●● Ye s

Wool ●● No

Silk ●● No

Synthetic fabric

(e.g. acrylic, nylon,

polyamide, polyester)

●No steam No

Note: As indicated in the table above, do not use steam or steam boost at a

low temperature, otherwise hot water may leak from the iron.

1 Consult table 1 to set the temperature dial to the appropriate

setting for your garment. (Fig. 4)

2 Select Auto steam setting in the steam slider. (Fig. 5)

This iron is equipped with Auto steam control. According to the

temperature you select, the iron automatically provides the optimal

amount of steam for the best result.

3 Place the iron on its base and connect the base to a power socket.

(Fig. 6)

ENGLISH

Note: Make sure that the base sits on a stable and level surface. It is

recommended to place the base on the soft part of the ironing board.

4 Thelightringstartstoashbluelight,indicatingtheironisheating

up. (Fig. 7)

5 When the blue light turns steady, you can start ironing. (Fig. 8 )

Operation of Smart Charging base

The iron is equipped with Smart Charging base. The light will indicate

the status of the iron, and remind you to charge the iron after 20 to

25 seconds to ensure a good wrinkle removal performance. Please

refer to table 2 for the operation of the base.

Note: to ensure good wrinkle removal performance, always put the iron on

its base during the resting period. Do not place the iron on its heel. (Fig.9)

Table 2

Light status Iron status Instructions

Flashing blue Heating up Wait for iron to be ready.

Steady blue Ready for use You can start ironing.

Flashing orange The iron needs to

be charged now

Put the iron back to the

base to charge it.

Slow breathing

blue (specic

types only)

Safety auto-off has

been activated

Refer to Chapter

“Features”, section “safety

auto-off”.

Features

Spray function

- Press the spray button to moisten the garment to be ironed. This

helps remove stubborn creases (Fig. 10).

ENGLISH

Steam boost function

- Press and release the steam boost trigger for a powerful boost of

steam to remove stubborn creases (Fig. 11).

- For optimal steam boost performance, it is recommended to press

the steam boost trigger at a 5 seconds interval.

Vertical steam

- You can use the steam boost function when you hold the iron in

vertical position for removing creases from hanging clothes, curtains

etc. (Fig. 12)

Ironing with extra steam

- For extra steam during ironing, press and hold the steam boost

trigger.

Eco steam setting / Dry ironing

- In stead of Auto steam, you could choose ECO setting in the steam

slider to save energy, yet to achieve satisfactory ironing results

- To iron without steam, select dry setting in the steam slider.

Safety auto-off function

- The iron switches off automatically if the iron is not in use for

8 minutes. The light ring starts to slowly breath in blue to indicate

the safety auto-off mode is activated.

- To let the iron heat up again, remove the iron (if the iron is on the

base) and put it back to the base.

Cleaning and maintenance

Cleaning

1 Set the steam control to , unplug the base and let the iron cool

down. (Fig. 2)

2 Pour any remaining water out of the water tank.

ENGLISH

3 Wipeakesandanyotherdepositsoffthesoleplatewithadamp

cloth and a non-abrasive (liquid) cleaning agent.

Caution: To keep the soleplate smooth, avoid hard contact with metal

objects. Never use a scouring pad, vinegar or other chemicals to clean

the soleplate.

Note: Regularly rinse the water tank with tap water. Empty the water tank

after rinsing it.

Calc-Clean function

IMPORTANT: To prolong the lifetime of your appliance and

to maintain good steaming performance, use the Calc-Clean

function once every two weeks. If the water in your area is

veryhard(i.e.whenakescomeoutofthesoleplateduring

ironing), use the Calc-Clean function more frequently.

1 Make sure the steam control is set to . (Fig. 2)

2 Fill the water tank to the MAX indication. (Fig. 3)

Do not pour vinegar or other descaling agents into the water tank.

3 Set the temperature dial to MAX. (Fig. 13)

4 Plug in the base, put the iron on the base and let the iron heat up.

(Fig. 6)

5 Remove the iron when the light ring turns steady blue. (Fig. 8)

6 Hold the iron over the sink. Keep pushing the calc clean button

and gently shake the iron forth and back until all water in the

water tank has been used up.

Caution:Whilescaleisushedout,steamandboilingwateralsocome

out of the soleplate.

7 Set the steam control back to . (Fig. 2)

ENGLISH

Note: Repeat the Calc-Clean process if the water that comes out of the iron

still contains scale particles.

After the Calc-Clean process

1 Put the iron on the base. Let the iron heat up to dry the soleplate.

2 Take the iron from the base when the light ring turns steady blue.

3 Move the iron gently over a piece of cloth to remove any water

stains on the soleplate.

Storage

1 Set the steam control back to . (Fig. 2)

2 Pour out any remaining water from the water tank.

3 Unplug the mains cord and wind the mains cord around the base.

(Fig. 16)

Remove iron from the base when you wind the cord, as the soleplate

could still be hot.

4 Put the iron on the base. Lock the iron to its base. (Fig. 17)

5 Let the iron cool down before you store it.

You can carry the iron and base by the iron handle. (Fig. 18)

Troubleshooting

This chapter summarises the most common problems you could

encounter with the appliance. If you are unable to solve the problem

with the information below, visit www.philips.com/support for a list of

frequently asked questions or contact the Consumer Care Centre in

your country (see the worldwide guarantee leaet for contact details).

Problem Possible cause Solution

The iron does

not produce

steam.

Cordless iron cools

down after a while. It

needs to be recharged.

Put the iron back to the

base until the light ring

turns steady blue light,

indicating that the iron is

ready for use again.

ENGLISH

Problem Possible cause Solution

The steam control is

set to .

Set the steam control to

a steam setting (consult

Table 1 in Chapter “using

the appliance”).

The water tank is empty. Fill the water tank.

You are using a

temperature of below

2 dots.

Consult Table 1

in Chapter “using

the appliance” for

temperature and steam

setting.

The iron leaks. Cordless iron cools

down after a while. It

needs to be recharged.

Put the iron back to its

base to heat up and dry

the soleplate.

You are using steam

boost at a low

temperature.

Put the iron back to its

base to heat up and dry

the soleplate.

Consult Table 1 for use

of steam boost.

You have used the

steam boost function

too often within a very

short period.

Put the iron back to its

base to heat up and dry

the soleplate. Use the

steam boost function

less frequently.

The water tank is

overlled.

Do not ll the water

tank beyond the MAX

indication.

The water lling door

is not closed properly.

Make sure that the

water lling door is

closed properly.

Inhaltsverzeichnis

Sprachen:

Andere Philips Eisen Handbücher

Philips

Philips GC7000 Series Bedienungsanleitung

Philips

Philips GC4412 Bedienungsanleitung

Philips

Philips GC7000 Series Bedienungsanleitung

Philips

Philips GC7036/27 Bedienungsanleitung

Philips

Philips GC1800 SERIES Bedienungsanleitung

Philips

Philips LightCare GC1490 Bedienungsanleitung

Philips

Philips 8000 Series Bedienungsanleitung

Philips

Philips GC1900 Bedienungsanleitung

Philips

Philips GC8700 series Bedienungsanleitung

Philips

Philips EasyCare GC8351 Bedienungsanleitung

Philips

Philips GC3320 Bedienungsanleitung

Philips

Philips PerfectCare Bedienungsanleitung

Philips

Philips Supervapor GC6046 Bedienungsanleitung

Philips

Philips GC3640 Bedienungsanleitung

Philips

Philips PerfectCare Pure GC7640/80 Bedienungsanleitung

Philips

Philips GC8460 Bedienungsanleitung

Philips

Philips COMFORT GC1120 Bedienungsanleitung

Philips

Philips GC3800 series Bedienungsanleitung

Philips

Philips GC6026/03 Bedienungsanleitung

Philips

Philips GC4845/15 Bedienungsanleitung

Philips

Philips COMFORT GC1015 Bedienungsanleitung

Philips

Philips GC5000 series Bedienungsanleitung

Philips

Philips HD1173 Bedienungsanleitung

Philips

Philips FC7010 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

GE 169061 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 GC Bedienungsanleitung

AEG

AEG DBS 5591 Bedienungsanleitung

Braun

Braun TexStyle 9 12790002 Bedienungsanleitung