Philips VL72 Bedienungsanleitung

OUT TO SUPPLY WIRES

SEE NOTE 3

STREET SIDE LABEL

SEE NOTE 5

POLE FASTENERS

SEE NOTES 2 & 6

INSTALLATION:

TURN POWER OFF.

2) Loosen pole fasteners on pod, if required.

3) Make fixture wiring connections to supply wires (by others)

- White to White

- Black to Black

- Green to Green

NOTE:

Both green ground wires from fixture should be

"bugged" together with incoming supply wire.

4) Slip luminaire post fitter onto pole and ensure wires

are not being pinched.

5) Orient by turning luminaire "street side" via label

supplied on globe fitter (pod).

6) Torque pole fasteners as follows to 7 ft. lbs.

CAUTION!

Over torquing of screws may lead to

damage or fatique of fastener.

7) Power to luminaire may now be turned on.

32002016, revision A

INSTALLATION INSTRUCTIONS:

VL71 & VL72

(Fixture)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

Ensure that the AC service is OFF before any installation or maintenance.

Do not switch service to ON until the entire installation is complete.

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-5/32" Allen Wrench/Driver

-Torque Wrench capable of 7 ft. lbs. torque

This fixture is intended for installation in accordance with the National Electrical Code and local code

specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage to

the fixture components and void the warranty. These instructions do not purport to cover all details or vairations

in equipment, nor to provide for every possible contingency related to installation, operation, maintenance, or

mounting situation. Should specific problems occur that are not addressed by these instructions, contact your

Sales Representative or distributor for assistance. Retain these instructions for future reference.

POD

(EXISTING)

LOOSEN FASTENERS

TO REMOVE GLOBE

(EXISTING)

CAMDEN ADAPTER

(NEW)

1/4-20 SCREWS

(NEW)

ECOSWAP ASSY

(NEW)

INSTALLATION:

TURN POWER OFF.

2) Loosen, but do not remove (4) globe fasteners on pod.

3) Lift globe from fixture.

4) Remove existing ballast assembly.

- Push spring clip to release ballast module, twist ballast

module counter-clockwise, and lift to remove.

- Disconnect blue power quick disconnect.

5) Remove ballast assembly ring by removing existing screws.

6) Remove terminal block and bracket (if applicable)

7) Assemble Ecoswap to camden adapter by twisting

clockwise until spring clip snaps into place.

8) Make proper wiring connections.

NOTE:

In many cases, you may need to remove existing

blue power disconnect to "bug" wires.

9) Install entire unit onto fixture with (2) 1/4-20 screws while

ensuring wires are not being pinched.

NOTE:

For Type 3 distribution modules, rotate to orient

"Street Side (SS)" identification located on

Ecoswap, toward street.

10) Carefully lower globe onto fixture.

11) Tighten (4) globe fasteners to secure globe.

REFERENCE:

Please see enclosed Power Selection drawing

to adjust wattage output of Ecoswap module.

32002016, revision A

INSTALLATION INSTRUCTIONS:

V71 & V72

(Retrofit)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW

TO COOL BEFORE PERFORMING ANY MAINTENANCE

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-1/2" Socket/Driver

-5/32" Allen Wrench/Driver

-Philips Head Screw Driver

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Leuchte Handbücher

Philips

Philips 405X Bedienungsanleitung

Philips

Philips CoralCare Bedienungsanleitung

Philips

Philips 69112-31-PH Bedienungsanleitung

Philips

Philips 34103-48-16 Bedienungsanleitung

Philips

Philips Lytespan 7599 Bedienungsanleitung

Philips

Philips 33219-31-16 Bedienungsanleitung

Philips

Philips VARI-Lite VL4000 Bedienungsanleitung

Philips

Philips 1004ICR Bedienungsanleitung

Philips

Philips Lytecaster 2000P1 Bedienungsanleitung

Philips

Philips 33259-31-16 Bedienungsanleitung

Philips

Philips Lytespan 8108 Bedienungsanleitung

Philips

Philips Alter Concept SR T5 Bedienungsanleitung

Philips

Philips Lytespan 6497 Bedienungsanleitung

Philips

Philips 24MHT45RS Bedienungsanleitung

Philips

Philips Calculite 8046 Bedienungsanleitung

Philips

Philips 69101-53-PH Bedienungsanleitung

Philips

Philips Lytecaster 409X Bedienungsanleitung

Philips

Philips Lytespan 23MHRS Bedienungsanleitung

Philips

Philips C4T4W Bedienungsanleitung

Philips

Philips LVL Series Bedienungsanleitung

Philips

Philips 33257-31-16 Bedienungsanleitung

Philips

Philips Lytecaster 1101HSW Bedienungsanleitung

Philips

Philips Bodine B30ST Bedienungsanleitung

Philips

Philips C4TCA2 Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung

ArtFox

ArtFox Beam 15R extreme Bedienungsanleitung