Philips Compac CTX6 Series Bedienungsanleitung

Commercial Emergency

CTX6 Series

Compac®Thermoplastic

Emergency Unit with Xtest

Project

Type

Model No.

Comments

Specifier’s Reference

CM-22200

Accessories (Order Separately)

WG5 – Wire Guard

PCS1 – PolycarbonateVandal Shield

Green Product Choice: CTX6

codes and standards

• ETL Listed to UL Standard 924

• NFPA 101 (Life Safety Code)

• NFPA 70 (National Electric Code)

construction

• Flame rated, UV stable ABS thermoplastic white

housing.

• Low profile test switch comes standard on the unit.

• Contemporary design external square style lamp

heads that utilize an innovative track system that

allows for a full range of adjustment for emergency

illumination.

installation

• Snap together quick mount design.

• Universal J-box mounting pattern.

electronics Xtest

• All units utilize a microprocessor and contain the

Xtest self-diagnostic/self-test circuitry.

• Each unit includes low voltage disconnect,AC

lockout, and brownout protection.

• Each unit with Xtest circuitry will automatically

conduct a self-test once a month with the lamps on

to verify all systems are functioning properly. For

complete details regarding Xtest circuitry see spec

sheet CE-17050.

• 120/277VAC selectable input.

• Power Consumption:

120V= 42 mA Line Amps

= 5.1W input Wattage

277V= 22.6 mA Line Amps

= 6.26W input Wattage

lamps

• Standard unit contains two 6 volt, 5.4W

tungsten lamps.

• The 18 Watt unit comes standard with 9W

tungsten lamps.

battery

• 6V Maintenance free sealed lead acid battery.

• Operating temperature range is 65˚F (19˚C) to

85˚F (30˚C).

• Provides a minimum of 90 minutes emergency

illumination.

warranty

• Five year warranty on unit (lamps not included).

Catalog Number Volts Total Wattage Remote1Housing Color LampType

Lead Calcium:

CTX6 6 12 None White 5.4W tungsten

CTX618 6 18 None White 9W tungsten

Footnote:

1Refer to CA-51300 for matching remote lamp heads.

CM-22200 08/16 page 1 of 2

CM-22200 CTX6 Series Compac®Thermoplastic Emergency Unit with Xtest

dimensions

5-11/16"

(128.3mm)

5-1/4"

(133.6mm)

11-1/16"

(280.9mm)

photometry

Meets Life Safety Code standard minimum illuminance of 0.1 FC and average

illuminance of 1.0 FC.Assumes open space with no obstructions, mounting

height: 8', ceiling height: 9', and reflectances: 80/50/20.Analysis based on

independently tested photometrics.

Xtest testing specifications

• Automatic Test:The system charger and lamps are continually being

controlled via pre-determined parameters specific to each model

configuration, automatically.The battery is controlled via a true open circuit

test each hour after initial installation. One each month the Xtest System

illuminates lamps under load for 30 minutes, simulating a power outage

with a true charger off condition, without affecting long term battery life.

This is above and beyond the requirements of the National Fire Protection

Association.This gives you unequaled control and confidence, knowing you

are meeting self-test code requirements each and every month.

• Manual Test:A manual test switch allows for the Xtest system to perform

the following tests at any time:

Press Button

Once–5 second test, charger off, no load

Twice–60 second test, charger off, lamps on

Three–90 minute test, charger off, lamps on

6-Second Hold–Fully reinitializes micro-processor.

Pressing once during any test will cancel/abort testing.

Location of sensor for laser activation

of manual test via handheld remote laser

tester (this is an optional feature, specify

“LX” option)

SELF-TEST / DIAGNOSTIC

CHARGER

BATTERY

LAMPS

CHG-TEST

Xtest Status Indicator Panel

AC/Green Charger/Red Batt/Red Lamp/Red Status/Fault Action

On AC power is on/OK None

FPerforming Test None

On F F F Lamp/Battery Disconnected or Charger Fault Check connections; if ok, replace circuit board

On F Charger fault Replace circuit board

On F Battery disconnected/fault Check connection or replace battery

On F Lamp disconnected/bad or remote disconnected Check connection then press manual test once to

determine bad lamp/replace lamp or check remote lamp.*

Fault Indications:

Four LED indicators provide visible indication of system status:

*If unit has remote capacity and remote cable is connected to charger board but not connected to

a remote load, then either connect remote load or disconnect cable from charger board.

On=Steady F=Flashing Blank=Off

lamp spacing avg. fc. max. fc. min. fc.

CTX6 5.4W tungsten 24ft. 1.0 2.00 0.1

CTX618 9W tungsten 39ft. 1.4 2.70 0.1

Test Numbers:

CTX6 - CSWA

CTX618 - CSWC

Philips reserves the right-make changes in specications

and/or-discontinue any product at any time without notice

or obligation and will not be liable for any consequences

resulting from the use of this publication.

philips.com/luminaires

Philips Lighting North America Corporation

200 Franklin Square Drive, Somerset, NJ 08873

Tel. 855-486-2216

Philips Lighting Canada Ltd.

281 Hillmount Rd, Markham, ON, Canada L6C 2S3

Tel. 800-668-9008

CM-22200 08/16 page 2 of 2

Dieses Handbuch passt für folgende Modelle

Andere Philips Beleuchtungsausrüstung Handbücher

Philips

Philips CR436B Bedienungsanleitung

Philips

Philips GreenPower LED toplighting linear module 2.2 Bedienungsanleitung

Philips

Philips Bodine B94G Type 2 Bedienungsanleitung

Philips

Philips 3222 623 87451 Bedienungsanleitung

Philips

Philips ED-37 Bedienungsanleitung

Philips

Philips Fluorescent Lamps Bedienungsanleitung

Philips

Philips PLFRESNEL1 Bedienungsanleitung

Philips

Philips Lightstrip Plus 71901 Series Bedienungsanleitung

Philips

Philips iPlayer 3 Bedienungsanleitung

Philips

Philips 32157-31-16 Bedienungsanleitung

Philips

Philips CitySpirit Street BDS480 Benutzerhandbuch

Philips

Philips eW Cove QLX Powercore Bedienungsanleitung

Philips

Philips Showline SL eSTROBE 130 Bedienungsanleitung

Philips

Philips B50LP Bedienungsanleitung

Philips

Philips 56494-31-16 Bedienungsanleitung

Philips

Philips eW Flex Compact Bedienungsanleitung

Philips

Philips GreenPower TLED InstantFit Bedienungsanleitung

Philips

Philips Selecon PL1 Series Bedienungsanleitung

Philips

Philips L 1250 - HPM Bedienungs- und Wartungsanleitung

Philips

Philips CR434B Bedienungsanleitung

Philips

Philips hue Adore Bedienungsanleitung

Philips

Philips Disney Softpal Sulley Bedienungsanleitung

Philips

Philips Disney Softpal Mickey Bedienungsanleitung

Philips

Philips 56420-31-16 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung