Philips SBC RU 530 Bedienungsanleitung

SBC RU 530/87U

Instructions for use

English 2

Instruzioni per l'uso

Italiano 12

Instrucciones de manejo

Español 20

Manual de utilização

Portugees 28

 

 36

Инструкции по

использованию

Русский 44

Návod k použití

Česky 52

Instrukcja obsługi

Polski 60

Universal

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 1

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 2

UNIVERSAL

SBC RU 530 U

SHIFT

PROG

TV VCR SAT

VOL VOL

123

456

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 9

Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . 10

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 68-75

1. Introduction

Congratulations on your purchase of the Philips SBC RU530 universal remote

control. After installing the remote control you can operate a maximum of

3 different appliances with it:TV,VCR, and satellite or cable decoders.

You can find information about how to prepare this remote control for use in

the chapter ‘Installing the remote control’.

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 4

Instructions for use

English

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2Place two R03, UM4 or AAA type batteries

into the battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Testing the remote control

The remote control has been programmed to operate most Philips

appliances. Because the RU530 may use different signals for each make and

even for different models of the same make, it is advisable to test whether

your appliance responds to the RU530.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (VCR, satellite or cable

decoder) which you want to operate using the RU530.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Use the RU530’s mode selector to

select TV. Press the key until the green light

under TV in the selector window lights up.

If no green light appears, check whether the

batteries are properly inserted

(see ‘Inserting the batteries’).

3Check whether all the keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the RU530 is ready for use.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’.

PROG

VOL VOL

TV VCR SAT

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 5

Setting the remote control

This is only necessary if your appliance does not respond to the RU530.

If that is the case, the RU530 does not recognize the brand and/or model of

your appliance and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances

(VCR, satellite or cable decoder) which you want to operate using the

RU530.

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list at the back of this

manual. One or more four-figure codes are shown for each brand.

Note the first code.

Be careful! There are separate tables for TV,VCR and SAT.

Make sure you use the codes from the correct table.

3Select TV with the mode selector.

(See ‘Testing the remote control’.)

4Keep keys ‘1’ and ‘3’ pressed simultaneously

for three seconds until the green light under

TV in the selector window flashes twice and

then remains lit.

5Then enter the code noted in step 2 using the digital keys.

– The green light in the selector window will now flash twice.

If the light flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the RU530 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the RU530 is ready for

use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

SHIFT

123

456

TV VCR SAT

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 6

Automatically setting the remote control

If you cannot find the right code for your brand device,

the remote control can automatically search for the right code.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The RU530 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

• If the device is a video recorder,

insert a tape and start playback.

2Then keep keys 1 and 3 on the RU530

pressed simultaneously for three seconds,

until the green light under TV in the selector

window flashes twice and then remains lit.

3Press the Standby key of the RU530 briefly.

– The RU530 now starts emitting all known

‘TV off ’ signals, one by one.

Each time a code is sent, the green light under

TV in the selector window lights up.

4When your TV switches off (stand-by),

you press the Standby key of the RU530

twice within 1 second, to confirm.

– The RU530 has now found a code that

works on your TV.

5Check if you can operate all functions on your

TV with the RU530.

• If this is not the case, you can redo the automatic setting.

The RU530 will then search for a code that perhaps works

better.

– After the RU530 has run through all the known codes,

the search will stop automatically and the green light will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

For VCR this time is 2 minutes and for SAT 4 minutes.

TV VCR SAT

SHIFT

123

456

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 7

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . switches TV,VCR or SAT mode on or off.

2Mode-selector . . . . selects the device you want to operate:

TV,VCR or SAT (satellite/cable).

3s. . . . . . . . . . . . . . . . mutes the sound of the TV.

4- VOL +. . . . . . . . . . . adjusts the TV volume.

5MENU . . . . . . . . . . . turns the menu on and off.

6Digital keys. . . . . . . direct choice of channels and other functions.

7SHIFT . . . . . . . . . . . for extra functions. When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + PROG+: . 'menu up'

SHIFT + PROG-:. . 'menu down'

SHIFT + VOL+: . . . 'menu right'

SHIFT + VOL-: . . . 'menu left'

Tr y out other combinations with the Shift-key on your appliance in order to

find out which functions are available.

Only functions featured on the original remote control are available.

81. . . . . . . . . . . . . . . . - red teletext key

- rewind (VCR)

99. . . . . . . . . . . . . . . . - green teletext key

- stop (VCR)

00. . . . . . . . . . . . . . . . tv: P1P, previous channel

VCR: record

SAT: A/B

!;. . . . . . . . . . . . . . . . . - yellow teletext key

- pause (VCR)

@6. . . . . . . . . . . . . . . . - blue teletext key

- wind (VCR)

#2. . . . . . . . . . . . . . . . - white teletext key

- index

- play (VCR)

$/. . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

%OK. . . . . . . . . . . . . . . confirms your selection.

^- PROG + . . . . . . . . selects a previous or following channel.

&AV . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

*. . . . . . . . TV: teletext keys

SAT: teletext, Info, Guide, Subtitle

VCR: timer, Showview

If you use the (ﬁ) 'memory off' key to get to the next teletext page on your

Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.

• If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’. It is possible that you must enter another code for the

device.

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 8

4. Extra possibilities

Adjusting device selection (Modeselector)

The RU530 is default set for operating TV,VCR and Sat (satelliet)/ CBL

(cable).You can select the device you wish to operate with the Mode

selector. Each option allows operation of one device only. If desired, you can

program the Mode selector to select a different kind of device.

For example, if you want to operate a second TV.

In the following example you will see how to configure the SAT mode for a

second TV.

1Switch on the second TV.

2Press the Mode selector to select SAT.

3Then keep 1 and 6 on the RU530 pressed

simultaneously for five seconds, until the

green light under SAT in the selector window

lights up.

4Press keys 9, 9 and 2, in that order.

5Press the Mode selector to select TV.

6Press the 1 key.

– The green light under SAT flashes twice.

SAT will now allow you to operate your

second TV.

7Program the RU530 to operate the second TV.

See ‘Setting the remote control’.

SHIFT

123

456

SHIFT

123

456

SHIFT

123

456

TV VCR SAT

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 9

Adding a function to the remote control

If you want to add a function to the RU530, you can contact the

Philips service line for Universal Remote Control to ask for the 3-figure code

for the extra function.

1Using the Mode selector, select the device

for which you want to add the function.

2Then keep 1 and 6 on the RU530 pressed

simultaneously for five seconds, until the

green light under TV in the selector window

flashes twice and then remains lit.

3Press keys 9, 9 and 4, in that order.

4Enter the 3-figure code which you received from the service line within

thirty seconds.

5Press the key under which you want to store the new function.

– The light flashes twice.

The extra function has been successfully added to the RU530.

• If you want to store the function under Shift in combination with

another key, first press the Shift key and then press the required

function key.

• For restoring the original function of the key,

see ‘Restoring the original functions of your remote control’.

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the RU530 pressed

simultaneously for five seconds, until the

green light under TV in the selector window

flashes twice and then remains lit.

2Press keys 9, 8 and 1, in that order.

– The light flashes twice.

All original functions have now been restored

and any extra functions have been deleted.

SHIFT

123

456

SHIFT

123

456

SHIFT

123

456

SHIFT

123

456

TV VCR SAT

Instructions for use

English

XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips SRU 5150/87 Bedienungsanleitung

Philips

Philips SRP5002 Bedienungsanleitung

Philips

Philips SBC RU 098 Bedienungsanleitung

Philips

Philips City line Bedienungsanleitung

Philips

Philips SRP9488C/27 Bedienungsanleitung

Philips

Philips SBCRU240/00 Bedienungsanleitung

Philips

Philips Prestigo SRU8015/10 Bedienungsanleitung

Philips

Philips SRP1101/10 Bedienungsanleitung

Philips

Philips SRU3003 Bedienungsanleitung

Philips

Philips Perfect replacement SRC3036WM Bedienungsanleitung

Philips

Philips Pronto TSU3000 Bedienungsanleitung

Philips

Philips srp3014 Bedienungsanleitung

Philips

Philips SRC3036/27 Installations- und Betriebshandbuch

Philips

Philips Perfect replacement SRC2063WM Bedienungsanleitung

Philips

Philips RC9800I/05 Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107 Bedienungsanleitung

Philips

Philips SBCRU520/87U Bedienungsanleitung

Philips

Philips 22AV1106 Bedienungsanleitung

Philips

Philips TSU7000 Bedienungsanleitung

Philips

Philips SRP504/86 Bedienungsanleitung

Philips

Philips SRU 4010/10 Bedienungsanleitung

Philips

Philips Omni Remotes RC3441507/01BR Bedienungsanleitung

Philips

Philips RP520 Bedienungsanleitung

Philips

Philips Magnavox 50P8241 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung