Philips SBCRU510/00B Bedienungsanleitung

SBC RU 510/00U

Instructions for use

English 4

Mode d'emploi

Français 11

Bedienungsanleitung

Deutsch 18

Gebruiksaanwijzing

Nederlands 25

Vejledning

Dansk 32

Bruksanvisning

Svenska 39

Bruksanvisning

Norsk 46

Käyttöohje

Suomi 53

Universal

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 1

XP SBC RU 520/00.3 06-02-2004 14:09 Pagina 2

UNIVERSAL

SBC RU510 U

SHIFT

PROG

VOL VOL

123

456

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 9

Restoring the original functions of your remote control . . . . . . . . . . . . 9

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 60-66

1. Introduction

Congratulations on your purchase of the Philips SBC RU510 universal remote

control. After installing the remote control it can operate the most-used

functions of almost any brand of TV.

You can find information about how to prepare this remote control for use in

the chapter ‘Installing the remote control’.

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 4

Instructions for use

English

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in

the direction of the arrow.

2Place two R03, UM4 or AAA type batteries

into the battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Testing the remote control

The remote control has been programmed to operate the most-used

functions of almost any brand of TV. Because the RU510 may use different

signals for each make and even for different models of the same make, it is

advisable to test whether your TV responds to the RU510.

The example below instructs you how to do this.

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Check whether all the keys are working

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the RU510 is ready for use.

• If the TV does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’.

PROG

VOL VOL

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 5

Setting the remote control

This is only necessary if your TV does not respond to the RU510.

If that is the case, the RU510 does not recognize the brand and/or model of

your TV and you need to program the remote control to do so.

The example belowinstructs you how to do this.

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list at the back of this

manual. One or more four-figure codes are shown for each brand.

Note the first code.

3Keep keys ‘1’ and ‘3’ pressed simultaneously

for three seconds until the green LED

flashes twice and then remains lit

4Then enter the code noted in step 2 using the digital keys.

– The green LED will now flash twice.

If the LED flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

5Point the RU510 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the RU510 is ready for

use. Do not forget to note your code.

• If the TV does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

SHIFT

123

456

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 6

Automatically setting the remote control

If you cannot find the right code for your brand device,

the remote control can automatically search for the right code.

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The RU510 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

2Then keep keys 1 and 3 on the RU510

pressed simultaneously for three seconds,

until the green LED flashes twice and then

remains lit.

3Press the Standby key of the RU510 briefly

– The RU510 now starts emitting all known

‘TV off ’ signals, one by one.

Each time a code is sent, the green LED

lights up

4When your TV switches off (stand-by), you

press the Standby key of the RU510 twice

within 1 second, to confirm.

– The RU510 has now found a code that works on your TV.

5Check if you can operate all functions on your TV with the RU510.

• If this is not the case, you can redo the automatic setting.

The RU510 will then search for a code that perhaps works

better.

– After the RU510 has run through all the known codes,

the search will stop automatically and the green LED will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

SHIFT

123

456

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 7

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . switches the TV on or off.

2s. . . . . . . . . . . . . . . . mutes the sound of the TV.

3- VOL +. . . . . . . . . . . adjusts the TV volume.

4MENU . . . . . . . . . . . turns the menu on and off.

5Digital keys. . . . . . . direct choice of channels and other functions.

6SHIFT . . . . . . . . . . . for extra functions.When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + PROG+: . 'menu up'

SHIFT + PROG-:. . 'menu down'

SHIFT + VOL+: . . . 'menu right'

SHIFT + VOL-: . . . 'menu left'

Tr y out other combinations with the Shift-key on your appliance in order to

find out which functions are available.

Only functions featured on the original remote control are available.

7/. . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

8OK. . . . . . . . . . . . . . . confirms your selection.

9- PROG + . . . . . . . . selects a previous or following channel.

0AV . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

!. . . . . . . . teletext keys

If you use the (ﬁ) 'memory off' key to get to the next teletext page on your

Philips TV, you can press the OK key for this. See also ‘Troubleshooting’.

• If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’. It is possible that you must enter another code for the

device.

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 8

4. Extra possibilities

Adding a function to the remote control

If you want to add a function to the RU510, you can contact the

Philips service line for Universal Remote Control to ask for the 3-figure code

for the extra function.

1Keep 1 and 6 on the RU510 pressed

simultaneously for three seconds, until the

green LED flashes twice and then remains lit.

2Press keys 9, 9 and 4, in that order

3Enter the 3-figure code which you received from the service line within

thirty seconds.

4Press the key under which you want to store the new function.

– The LED flashes twice.

The extra function has been successfully added to the RU510.

• If you want to store the function under Shift in combination with

another key, first press the Shift key and then press the required

function key.

• For restoring the original function of the key,

see ‘Restoring the original functions of your remote control’.

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the RU510

pressed simultaneously for three seconds,

until the green light flashes twice and then

remains lit.

2Press keys 9, 8 and 1, in that order

– The light flashes twice.

All original functions have now been restored

and any extra functions have been deleted.

SHIFT

123

456

SHIFT

123

456

SHIFT

123

456

SHIFT

123

456

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 9

5. Troubleshooting

• Problem

– Solution

• The TV does not respond and the green LED does not flash when you

press a key.

– Replace the old batteries with two new 1.5 Volt, RO3, UM4 or AAA batteries.

• The TV does not respond but the green LED does flash when a key is

pressed.

– Point the RU510 at the device and make sure that there are no obstructions

between the RU510 and the device.

• The RU510 does not respond properly to commands.

– Maybe you are using the wrong code.Try programming the RU510 again

using another code, which is mentioned under the brand of your device, or

reset for automatic search to find the right code.

If the TV still does not respond, call our helpline.

• You cannot get the Teletext pages on your screen,

while you are used to use the (ﬁ) button for this.

– Follow the instructions under ‘Setting the remote control’ and at step 4 press

keys 0, 0, 6 and 4.

Press the OK key to get Teletext pages on your screen.

• The Teletext keys do not work.

– Find out whether your TV is equipped with Teletext.

• You cannot switch off Teletext.

– Press the key for subtitling ( ) to switch off Teletext.

• You have difficulties operating all of the functions on your device.

– Maybe the RU510 has to be adapted to the model of the device.

Call our helpline for details.

• Your brand of device is not in the code list.

– Try to set the RU510 automatically.

See ‘Automatically setting the remote control’.

• None of the codes works during manual setting of the remote control.

– If that is the case, follow the instructions under

‘Automatically setting the remote control’.

6. Need help?

If you have any questions about the RU510, call our special helpline.You will

find the telephone number after the code list at the back of this manual.

Read this manual carefully before you make a call.You can solve most of the

problems yourself. If you cannot find any answers to your problems, write

down the details of your device shown in the code list at the back of this

manual.This will help our operators to assist you better and more quickly.

Look up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make sure

the device is to hand so that our operators can help you determine whether

your remote control is working properly.

The model number of your Philips universal remote control is

SBC RU510/00U.

Date of purchase: ......../......../........

(day/month/year)

Instructions for use

English

XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 10

Andere Handbücher für SBCRU510/00B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips SRU9400/17 Bedienungsanleitung

Philips

Philips SRC2063 Bedienungsanleitung

Philips

Philips Perfect replacement SRC2063WM/17 Bedienungsanleitung

Philips

Philips Pronto TSU9800 Sicherheitsleitfaden

Philips

Philips ProntoPro Next Generation Bedienungsanleitung

Philips

Philips SRU4105WM - Universal Remote Control Bedienungsanleitung

Philips

Philips SRP3219G/27 Bedienungsanleitung

Philips

Philips PM525S - Phlips 5 Device Universal Remote... Bedienungsanleitung

Philips

Philips SRU3006/27 Bedienungsanleitung

Philips

Philips SRU 5150/87 Bedienungsanleitung

Philips

Philips US2-PHDVD5 Bedienungsanleitung

Philips

Philips SBCRU510/87B Bedienungsanleitung

Philips

Philips SRP2002/10 Bedienungsanleitung

Philips

Philips TSU3500 Bedienungsanleitung

Philips

Philips 22AV8573 Bedienungsanleitung

Philips

Philips SRP6219G/27 Bedienungsanleitung

Philips

Philips SRU4006/27 Bedienungsanleitung

Philips

Philips LRS2211R Bedienungsanleitung

Philips

Philips 29PT9413/12 Bedienungsanleitung

Philips

Philips SRP6207/27 Bedienungsanleitung

Philips

Philips RU125 Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107WM/17 Bedienungsanleitung

Philips

Philips SRU 530/87 Bedienungsanleitung

Philips

Philips SRP4004/87 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung