Philips SRM 5100 Bedienungsanleitung

SRM 5100

www.philips.com/welcome

User Manual 4

Manuel d’utilisation 14

Bedienungsanleitung 24

Gebruiksaanwijzing 34

Använderhandbok 44

Brukerhåndbok 54

Käyttöohje 64

Manuale d'uso 74

Guía de usuario 84

Manual do utilizador 94

Руководство по

эксплуатации 104

Kullanım kılavuzu 114

Quick, Clean & Easy Setup

www.philips.com/urc

SRM5100_Def 31-05-2007 16:43 Pagina 1

Your Remote Control

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome

SRM5100_Def 31-05-2007 16:43 Pagina 2

(

™

)

SRM5100_Def 31-05-2007 16:43 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Connecting the receiver (for PC only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Inserting the batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 10

Assigning the volume control to another mode . . . . . . . . . . . . . . . . 10-11

Restoring the original functions of your remote control . . . . . . . . . . . . 11

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . 124-137

Information to the consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

1. Introduction

Congratulations on your purchase of the Philips SRM 5100 universal remote

control. After installing the remote control you can operate a maximum of

4 different devices with it:Windows Vista™based PC,TV (TV, LCD TV, plasma

TV, projector, HD TV), STB (Set Top Box, satellite or cable decoder, digital

terrestrial receiver / decoder) and AMP (amplifier, receiver, Home Theatre

System).You can find information about how to prepare this remote control

for use in the chapter ‘Installing the remote control’.

2. Installing the remote control

Connecting the receiver (for PC only)

•Plug the receiver USB connector into one

of the PC’s / laptop’s USB ports.

– A green LED lights up, indicating that the

receiver is deriving its power from the PC /

laptop.

– A red LED lights up.The PC / laptop is now

looking for the driver. As soon as the driver is

found the red LED goes out.The receiver is

now ready for use.

Inserting the batteries in the remote control

1Press the cover inwards and slide it in

the direction of the arrow.

2Place two AAA type batteries into the battery

compartment as shown.

3Slide the cover back and click it firmly into

place.

Note: If, after every key press, all indicator LEDs (PC,TV, STB and AMP) light up

and then go out one after another, the remote control is indicating that its

batteries are running low. Replace the batteries.

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 4

Instructions for use

English

Testing the remote control

The remote control has been programmed to operate all Windows Vista™

based PCs and most Philips devices (TV, STB and AMP).

Because the SRM 5100 may use different signals for each brand and even for

different models of the same brand, it is advisable to test whether your

device responds to the SRM 5100.

There is no need to select PC mode first; the remote control is set to PC

mode by default. Make sure your PC runs on Windows Vista™.

1Turn on your PC.

2Aim the remote control at the receiver and check if the PC reacts on

the remote control commands.

•If the PC does not respond to key commands, check that the batteries are

properly inserted and the USB connector is properly plugged into the PC /

laptop USB port. See ‘Setting the remote control’.

Other devices (TV, STB and AMP)

The example below (TV - TV, LCD TV, plasma TV, projector, HD TV) instructs

you how to do this.You can repeat the same steps for other devices

(STB and AMP) which you want to operate using the SRM 5100.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Press the MODE key to select TV.

Press the key until the TV LED lights up.

– The LED lights up for 10 seconds and then

goes out.

•If the LED does not light up, check whether the

batteries are properly inserted.

See ‘Setting the remote control’.

3Check whether all keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRM 5100 is ready TV.

• If the device does not respond at all or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’, or for online setup go to: www.philips.com/urc

Setting the remote control

There is no need to set up the remote control for use with your Windows

Vista™based PC. For operating other devices set up is only necessary if the

device (TV, STB and AMP) does not respond to the SRM 5100.

If that is the case, the SRM 5100 does not recognize the brand and / or

model of your device and you need to program the remote control to do so.

The example below (TV - TV, LCD TV, plasma TV, projector, HD TV) instructs

you how to do this.You can repeat the same steps for other devices

(STB and AMP) which you want to operate using the SRM 5100.

SRM5100_Def 31-05-2007 16:43 Pagina 5

Note:The third mode (STB) can be used either for operating your Set Top Box,

satellite or cable decoder or digital terrestrial receiver / decoder.

The fourth mode (AMP) can be used either for operating your amplifier,

receiver or Home Theatre System.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV (TV, LCD TV, plasma TV, projector, HD TV):

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRM 5100 emits the ‘switch TV to standby’ signal for all models of

TV that are stored in the memory.

2Press the MODE key to select TV.

Press the key until the TV LED lights up.

– The LED lights up for 10 seconds and then

goes out.

3Then keep keys 1and 3 pressed

simultaneously for three seconds until the TV

LED flashes twice and then remains lit.

4Press the SRM 5100 Standby (y) key.

– The TV LED goes out and the SRM 5100 now

starts emitting all known ‘switch TV to standby’

signals, one by one.

Each time a code is sent, the TV LED lights up.

5When your TV switches to standby,

immediately press the SRM 5100 Standby (y)

key to stop the auto-search.

– The TV LED blinks twice and then goes out.The SRM 5100 has now

found a code that works on your TV.

6Check if you can operate all functions on your TV with the SRM 5100.

• If this is not the case, you can redo the automatic setting.

The SRM 5100 will then search for a code that works better.

– After the SRM 5100 has run through all the known codes, the search

will stop automatically and the TV LED will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

For STB and AMP this time is 2 minutes.

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 6

Manually setting the remote control

Example of TV (TV, LCD TV, plasma TV, projector, HD TV):

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list

at the back of this manual. One or more four-

figure codes are shown for each brand. Note

the first code.

Be careful! There are separate tables for TV, STB

and AMP.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

Make sure you use the codes from the correct table.

3Press the MODE key to select TV.

Press the key until the TV LED lights up.

– The LED lights up for 10 seconds and then

goes out.

4Keep keys 1and 3 pressed simultaneously

for three seconds until the TV LED flashes

twice and then remains lit.

5Then enter the code noted in step 2 using the digit keys.

– The TV LED key will now flash twice. If the LED flashes once for an

extended period, the code has not been entered properly or the wrong

code has been entered. Start again from step 2.

6Point the SRM 5100 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRM 5100 is ready

for use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the key

commands, start again from step 2 and try the next code from

the list.

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 7

3. Keys and functions

The illustrations on page 3 gives an overview of all keys and their functions.

Remote control

1yStandby.......................switches PC,TV, STB and AMP on or off.

2MODE ...............................selects PC,TV, STB or AMP mode.

3Indicator LEDs..........indicate selected mode.

4Multimedia keys

;...............................................pause (PC, STB, AMP)

0.............................................record (PC, STB, AMP)

5............................................rewind (PC, STB, AMP)

2..............................................play (PC, STB, AMP)

¡.............................................previous track (PC, STB, AMP)

™.............................................next track (PC, STB, AMP)

5™.......................................opens Windows®Media Center start menu.

Microsoft,Windows,Windows Logo, and Windows

Vista are either registered trademarks or

trademarks of Microsoft Corporation in the

United States and/or other countries.

6...........................................- jumps back one position in the user interface

(PC, Media Center).

- jumps back one level in the menu or turns off

the menu (TV, STB, AMP).

7Cursor keys..................cursor up, down, left, right in a menu.

8OK.........................................confirms your selection.

9..........................................mutes the TV or AMP sound.

0-+........................................adjusts the TV or AMP volume.

!..........................................- displays the Guide in Windows®Media Center.

- displays Electronic Program Guide (TV, STB).

- selects FM radio (AMP).

@............................................- displays the Recorded TV page in Windows®

Media Center.

- selects AM radio (AMP).

#Digit keys........................- direct choice of channels and other functions

(TV, STB, AMP).

- text entry (PC, Media Center).

$............................................- text entry (PC, Media Center).

- selects between one- and two-figure channel

numbers (TV, STB).

%CLEAR ............................deletes text during text entry (PC, Media Center).

^Red, green,

yellow, blue keys.......- red, green, yellow and blue teletext keys

(PC, Media Center,TV, STB).

- red: switches surround mode on / off (AMP).

- green: selects surround modes (AMP).

- yellow: switches DSP (Digital Signal Processor)

on / off (AMP).

- blue: selects DSP (Digital Signal Processor)

modes (AMP).

&.........................................switches teletext on / off.

*ENTER ............................confirms menu selection.

(............................................- text entry (PC, Media Center).

- switches between external (audio / video) inputs

of your equipment (TV, STB).

- source selection (AMP).

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 8

)...........................................- turns the menu on and off (TV, STB, AMP).

- opens DVD menu (PC, Media Center).

¡...........................................shows live TV on the currently selected channel.

™-+.......................................- selects a previous or next channel (PC, Media

Center,TV, STB).

- selects a previous or next preset channel (AMP).

£i ..............................................- displays on-screen channel information (TV, STB,

AMP).

- provides information for the focus point.

An icon indicates your position in the menu

(PC, Media Center).

Receiver

1Green LED ..................lights up when the receiver is deriving its power

from the PC / laptop.

2USB connector.........connects to the USB port of your Windows Vista™

based PC / laptop.

3Red LED ........................- lights up when the PC / laptop starts looking for

the driver.The LED goes out as soon as the

driver is found.

- lights up when the receiver receives a signal from

the remote control.

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

4. Extra possibilities

Learn a key

If you miss certain functions from your original remote control on the

SRM 5100, the SRM 5100 can learn these functions from the original remote

control.You can store a function under any of the available keys of the

SRM 5100, except ™and MODE. Please, note that any function already

stored under a key will be deleted.

Microsoft,Windows,Windows Logo, and Windows Vista are either registered

trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

Example of TV (TV, LCD TV, plasma TV, projector, HD TV):

Make sure you have the original TV remote control at hand.

1Place both remote controls on a flat surface

(like a coffee table) and aim them head-to-

head with about 5 - 10 cm in between.

2Press the MODE key to select TV.

Press the key until the TV LED lights up.

– The LED lights up for 10 seconds and then

goes out.

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 9

3Keep keys 1and 6 pressed

simultaneously for three seconds until the TV

LED flashes twice and then remains lit.

4Press keys 9,9and 8in that order.

– The TV LED blinks twice and then remains lit.

5Press the target key on the SRM 5100.

6Press and hold the key you want to copy on the original remote

control. Keep the key pressed until the TV LED goes out and then blinks

twice.

– The signal is now stored in the remote control memory.

– If the LED blinks once for a longer period, the IR signal is not learned by

the SRM 5100. Please, try a few times and make sure the remote

controls are aligned as described in step 3.

If the SRM 5100 cannot learn the code after several times trying, it is possible

that:

– The IR signal of your original device is out of range (the SRM 5100 can

only learn IR signals with a carrier signal of 30-60kHz).

– The memory of the SRM 5100 is full.

– The SRM 5100 stopped the learning process after 20 seconds for no IR

signals were found. Check if your original remote control is working

correctly.

Adding a function to the remote control

If you want to add a function to the SRM 5100, you can contact the Philips

service line for Universal Remote Control to ask for the 5-figure code for the

extra function.

Assigning the volume control to another mode

(Volume control punch through)

In most home entertainment systems, the volume is controlled by one device

only (usually TV or amplifier).This means that you always have to switch to TV

or AMP mode to adjust the volume of an other device.

The ‘Volume control punch through’ feature enables you to set the remote

control’s -+and keys to also adjust the sound of other devices in your

system, even those that do not have a volume control of their own.

Instructions for use

English

SRM5100_Def 31-05-2007 16:43 Pagina 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips SBC RU 510 Bedienungsanleitung

Philips

Philips SRP3219G/27 Bedienungsanleitung

Philips

Philips SBC RU 520 Bedienungsanleitung

Philips

Philips Home Power SPC1241AT/27 Bedienungsanleitung

Philips

Philips SRU5110/87 Bedienungsanleitung

Philips

Philips SRP 3004/10 Bedienungsanleitung

Philips

Philips SBCRU640 Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107 Bedienungsanleitung

Philips

Philips SRP5002 Bedienungsanleitung

Philips

Philips SRU3004 Bedienungsanleitung

Philips

Philips SBCRU125/00 Bedienungsanleitung

Philips

Philips 22AV1106B Bedienungsanleitung

Philips

Philips SRU5110/87 Bedienungsanleitung

Philips

Philips PM525S - Phlips 5 Device Universal Remote... Bedienungsanleitung

Philips

Philips SRU5150/86 Bedienungsanleitung

Philips

Philips SRP5018 Bedienungsanleitung

Philips

Philips SRP2004WM Bedienungsanleitung

Philips

Philips Prestigo SRU8015/10 Bedienungsanleitung

Philips

Philips GV-3/1F-RC-M433 Bedienungsanleitung

Philips

Philips SRP9488C/27 Bedienungsanleitung

Philips

Philips Perfect replacement SRC3036WM/17 Bedienungsanleitung

Philips

Philips Hue Bridge 2.0 Bedienungsanleitung

Philips

Philips SBCRU980/05 Bedienungsanleitung

Philips

Philips SRU 5150/87 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung