Philips SRP4004/86 Bedienungsanleitung

SRP4004/86

EN User Manual 3

DE Bedienungsanleitung 14

FR Mode d’emploi 25

NL Gebruikershandleiding 36

SV Bruksanvisning 47

DK Brugervejledning 57

FI Käyttöopas 67

NO Bruksanvisning 77

and get support at

www.philips.com/welcome

SRP4004_86_Manual.indd 1 28-05-09 18:17

SRP4004_86_Manual.indd 2 28-05-09 18:17

3EN

Table of contents

1 Your SRP4004.......................................................................3

2 Getting started ................................................................. 4-8

2.1 Inserting the batteries...............................................................4

2.2 Testing the universal remote control ............................... 4

2.3 Setting up the universal remote control....................5-8

3 Using the universal remote control...........................8-10

3.1 Keys and functions................................................................8-10

3.2 Resetting a key to its original function...........................10

4 Service and support ....................................................11-13

4.1 Frequently asked questions..........................................11-12

4.2 Need help? ....................................................................................13

Helpline ...........................................................................................88

Brandlist................................................................................89-102

Information to the consumer ..........................................103

Your SRP4004

Congratulations on your purchase of the Philips SRP4004

universal remote control.After setting up the remote control

you can operate up to 4 different devices with it.

Simple Setup

Improved with Philips patented (pending) Simple Setup

technology, the SRP4004 can be set up easily forTV, DVD

player / recorder,VCR and all common set-top boxes, such

as Sky, BritishTelecom, Orange, Freebox,TNT, Canal Digital,

Telefonica, Premiere, Kabel Deutschland, BelgacomTV,Telenet,

Viasat and many more.

Simply follow the instructions in chapter 2.3 to set up the

remote control for your devices.

Glow keys

The remote control glow keys (-VOL +, - CH + and

numeric keys) light up in the dark, enabling easy use of the

remote control, even in a dimly lit room

To fully benefit from the support that Philips offers, register

your product at www.philips.com/welcome.

Your SRP4004 English

SRP4004_86_Manual.indd 3 28-05-09 18:17

4EN

Getting started

2.1 Inserting the batteries

•Insert 2 AAA type batteries,

noting the + and -

configuration in the battery

compartment.

Note

When replacing the batteries, all user settings will be

retained in the remote control memory for an unlimited

period of time.

2.2 Testing the universal remote control

It is advised to test whether your device(s) already

respond(s) to the SRP4004 before setting it up (see chapter

2.3).The example below instructs you how to do this for

yourTV. You can repeat the same steps for other devices

(STB, DVD player/recorder and VCR) which you want to

operate using the SRP4004.

Example: testing the universal remote control on yourTV:

1Turn ON yourTV manually or use the original remote

control for this. Tune to channel 1.

2Press the device

selection key to selectTV.

 • Thekeylightsup.

• Ifthekeydoesnotlightup,

check whether the batteries

are properly inserted

(see chapter 2.1).

3Check whether the keys

that you need for operating

yourTV are working. For an

overview of the keys and

their functions see

chapter 3.1.

 • IftheTVrespondsasitshouldtoallofthekey

commands, the SRP4004 is ready for use.

• If the device does not respond at all or not to all of the key

commands, follow the instructions in chapter 2.3.

SRP4004_86_Manual.indd 4 28-05-09 18:17

5EN

2.3 Setting up the universal remote control

This is only necessary if your device does not respond to the

SRP4004. If that is the case, the SRP4004 does not recognize

the brand and / or model of your device and you need to set

up the remote control to do so.

The example below instructs you how to do this for your TV.

You can repeat the same steps for other devices (

STB, DVD

player/recorder and VCR

) which you want to operate, using

the SRP4004.

The remote control can be set up to operate any 4 of the

following devices:

Device name Description

TV TraditionalTV,atscreenTVand

projectionTV,TV part ofTV /VCR,TV /

VCR / DVD andTV / DVD combos

STB Cable box, satellite receiver, Digital

Video BroadcastingTerrestrial device

(DVB-T), Internet ProtocolTV

(IPTV),FreeToAirTV,HighDenition

Television decoder (HDTV)

DVD DVD player / recorder (DVDR), DVD /

Hard Disk Drive combination (DVDR-

HDD),Blu-Rayplayer,HighDenition

DVD player (HD-DVD), DVD part of

TV / DVD,TV /VCR / DVD andVCR /

DVD combos

VCR Video cassette player / recorder,VCR

part of TV /VCR,TV /VCR / DVD and

VCR / DVD combos

Example: setting up the universal remote control to

operate your TV:

1Turn ON the TV manually or use the original remote

control for this. Tune to channel 1.

2Press and holdthe

device selection key

for 5 seconds until the red

Setup LED lights up.

The remote control is now

in setup mode.

Getting started English

5 sec.

SRP4004_86_Manual.indd 5 28-05-09 18:17

6EN

3Look up the brand of your

TV in the brand

list

at the

back of this user manual.

A four-digit code is shown

for each brand.

Use the digit keys to enter

the code for your brand

(e.g. Philips, ).

 • IftheredSetupLED

turns off, an invalid code

was entered. In this case,

try again.

4Aim the remote control at

theTV. Press and hold the

key and immediately

release it when theTV

switches off (standby).

•This step normally

takes between 5 and 60 seconds. In extreme

circumstances this step can take up to 15 minutes.

5Turn ON the TV and check

if all keys that you need for

operating your TV are

working.Try, for example, if

the - CH + and digit keys

function properly.

• Ifakeydoesnotfunctionasexpected,press and hold it

and immediatley release it as soon as it works. For more

information, see chapter 2.3.2.

6Press the device

selection key twice to save

your settings and exit setup

mode.

 • When no key is pressed

for 5 minutes or more,

the remote control will

exit setup mode, automatically saving all your settings.

Note

• 

If you wish to restart setup, you can start again from

the beginning at any time.

5 - 60 sec.

5-60 SEC

2 x

SRP4004_86_Manual.indd 6 28-05-09 18:17

7EN

• If the device does not respond at all or not to all of the key

commands or if you cannot find the code for your brand,

enter ‘9, 9, 9, 9’ in step 3 and continue with step 4.The

remote control will now search its full database for a code

that works with your TV. Full database search may take up

to 15 minutes.

2.3.1 Setting up the remote control for other devices

(STB, DVD player / recorder andVCR)

1 Make sure the device is turned on, fully operational and

able to respond to remote control commands. E.g. insert

a disc in the DVD player / recorder or a video cassette in

theVCR.

2Then follow steps 2to 6of ‘Setting up the remote

control for your TV’. Make sure to use the correct device

selection key: , or .

2.3.2 Improving keys

When correctly set up, the remote control should be able

to operate all your devices. However, when using the remote

control for the first time it might occur that some keys do

not yet function as expected.

In this case you can have the remote control search for

alternatives.

Note

Improving keys is not possible when the code was found

during full database search (with code ‘9, 9, 9, 9’).

During initial setup

1 Make sure the receiving device is able to respond.

E.g. when you try to repair the Play key for your DVD

player, make sure to insert a DVD into the DVD player

otherwise the Play key is not able to function.

2Press the key that does not function, keep it pressed and

immediately release it when the device responds.

Repeat this for every key that does not function.

• Ifthekeystilldoesnotfunctionasexpected,trypressing

it again for a longer period of time.

After initial setup

1 Make sure the receiving device is able to respond.

E.g. when you try to repair the Play key for your DVD

player, make sure to insert a DVD into the DVD player

otherwise the Play key is not able to function.

Getting started English

SRP4004_86_Manual.indd 7 28-05-09 18:17

8EN

2Select the device you wish

to operate

(e.g. DVD).

Press the device

selection key to select DVD.

3Keep keys

and

pressed simultaneously for

5 seconds.

 • The red Setup LED

lights up.The remote

control is now in setup

mode.

Press and hold the key that does not function and

immediately release it when the device responds.

• Ifthekeystilldoesnotfunctionasexpected,try

pressing it again for a longer period of time.

5Press the device

selection key twice to save

your settings and exit setup

mode.

 • When no key is

pressed for 5 minutes

or more, the remote control will exit setup mode,

automatically saving all your settings.

3 Using the universal remote

control

3.1 Keys and functions

The illustration on page 2 gives an overview of all keys on

the remote control.Try out the keys you need for operating

your devices.

Notes

•Keys having the same functions as the keys on your

original remote control may have different namings

on the SRP4004 (e.g. Info / Display).

•Only functions that are available on your original

remote control can be used for operating your

devices with the SRP4004.

5 sec.

2 x

SRP4004_86_Manual.indd 8 28-05-09 18:17

9EN

English

1.................................... Setup LED. Lights up red when the

remote control is in setup mode.

2............................... switches between external (Audio /

video) inputs of your equipment.

3......... device selection keys.

•selectthedevicetobeoperated.

•lightupwhenaremotecontrol

command is being sent.

GUIDE....................... electronic program guide.

MENU / HOME... menu on / off.

INFO........................... on-screen channel information.

EXIT............................ exits / clears on-screen menu

displays.

3 4 1 2 ............... cursor up, down, left, right in a menu.

OK............................... confirms your selection.

Colored keys......... Teletext / context sensitivity keys.

+VOL -...................... adjustsTV volume.

................................ mutesTV sound.

................................ previous program / Last.

+ CH -....................... previous / next channel.

4P 3P........................ previous (4P) / next (3P) page /

track in various modes.

/ ........................ teletext on ( ) / off ( ).

5.................................. rewind.

2.................................... play.

6.................................. fast forward.

9.................................... stop.

0................................... record.

;..................................... pause.

*TXT / ............. •widescreen.

•STB:text.

Using the universal remote control

SRP4004_86_Manual.indd 9 28-05-09 18:17

10 EN

#HELP / /.......... •selectsbetweenoneandtwo-figure

channel numbers and channel

numbers with more than two or

three figures.

  •STB:Help.

8............ digit keys for direct channel / track

selection.

9................................ switches the selected device on / off.

Note

For someTV brands / types, this key will only turn off the

TV.You will have to press a digit button (direct channel

selection) to turn on theTV again.

3.2 Resetting a key to its original function

If an improved key (see chapter 2.3.2.) still does not

function as expected, you can always reset the key to its

original function.

In the current device

mode, keep digit keys

and

pressed

simultaneously for

5 seconds,

until the red

Setup LED lights up.

 • Theremotecontrolisnowinsetupmode.

Press digit keys , ,

and ,

in that order.

 • Aftereachkeypress

the device selection key

blinks once.

Press the key you wish to

reset twice. E.g. the 22 key.

 • Aftereachkeypress

the device selection key

blinks once.

 • Thedeviceselectionkey

will blink one more time to confirm that the key was

succesfully reset to its original function.

5 sec.

2 x

SRP4004_86_Manual.indd 10 28-05-09 18:17

Andere Handbücher für SRP4004/86

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips SRP 1001 Bedienungsanleitung

Philips

Philips Pronto TSU9800 Sicherheitsleitfaden

Philips

Philips SRP4004/55 Bedienungsanleitung

Philips

Philips MAGNAVOX PR1911B Bedienungsanleitung

Philips

Philips SRU4106/27 Bedienungsanleitung

Philips

Philips SRP1003WM/17 Bedienungsanleitung

Philips

Philips SRP2018/27 Bedienungsanleitung

Philips

Philips TV Remote Control Bedienungsanleitung

Philips

Philips SRU5040/55 Bedienungsanleitung

Philips

Philips KWR101803/01B Bedienungsanleitung

Philips

Philips Perfect replacement SRU5107 Bedienungsanleitung

Philips

Philips Pronto TSU9400 Sicherheitsleitfaden

Philips

Philips SBCRU422/87U Bedienungsanleitung

Philips

Philips Perfect replacement SRP5107/27 Bedienungsanleitung

Philips

Philips SRU 740/10 Bedienungsanleitung

Philips

Philips SBC RU 520 Bedienungsanleitung

Philips

Philips SBC RU 230/00 Bedienungsanleitung

Philips

Philips SBCRU098/00 Bedienungsanleitung

Philips

Philips LRS2211R Bedienungsanleitung

Philips

Philips srp3014 Bedienungsanleitung

Philips

Philips SRU 560/86 Bedienungsanleitung

Philips

Philips PM8TSMD Bedienungsanleitung

Philips

Philips SRU3005/27 Bedienungsanleitung

Philips

Philips SBCRU510 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung