Philips SRU 5040/10 Bedienungsanleitung

SRU 5040/10

Instructions for use 4

Mode d'emploi 11

Bedienungsanleitung 19

Gebruiksaanwijzing 27

Vejledning 35

Bruksanvisning 43

Bruksanvisning 51

Käyttöohje 59

Instruzioni per l'uso 67

Instrucciones de

manejo 75

Manual de utilização 83

Quick, Clean & Easy Setup

www.philips.com/urc

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . . . 8

Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Restoring the original remote control settings . . . . . . . . . . . . . . . . . . 9-10

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 91-112

Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

1. Introduction

Congratulations on your purchase of the Philips SRU 5040 universal remote

control. After installing the remote control you can operate a maximum of

4 different devices with it:TV, DVD player/recorder, video recorder and STB

(settop box, satellite or cable decoder).You can find information about how

to prepare this remote control for use in the chapter ‘Installing the remote

control’.

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2Place two AAA type batteries into the

battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Note: If the device indicators in the selector window (TV, DVD, STB and VCR) blink

four times after every key press, the remote control is indicating that its

batteries are running low. Replace the old batteries with two new AAA

batteries.

Testing the remote control

The remote control has been programmed to operate most Philips devices.

Because the SRU 5040 may use different signals for each brand and even for

different models of the same brand, it is advisable to test whether your device

responds to the SRU 5040.The example below (TV) instructs you how to do

this.You can repeat the same steps for other devices (DVD player/recorder,

video recorder, etc.) which you want to operate using the SRU 5040.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

Instructions for use

English

2Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

If TV does not light up, check whether the

batteries are properly inserted

(see ‘Inserting the batteries’).

3Check whether all keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU 5040 is ready for use.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your device does not respond to the SRU 5040.

If that is the case, the SRU 5040 does not recognize the brand and/or model

of your device and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other devices (DVD player/recorder, video recorder, etc.)

which you want to operate using the SRU 5040.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

•If the device is a DVD player/recorder or video recorder,

insert a disk or tape and start playback.

2Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

3Then keep keys 1 and 3 pressed

simultaneously for five seconds until TV in the

selector window flashes twice and then

remains lit.

4Press and hold the Standby key of the

SRU 5040.

Instructions for use

English

– The SRU 5040 now starts emitting all known

‘TV off ’ signals, one by one.

Each time a code is sent,TV in the selector

window lights up.

5When your TV switches off (stand-by), release the Standby key of the

SRU 5040 immediately.

– The SRU 5040 has now found a code that works on your TV.

6Check if you can operate all functions on your TV with the SRU 5040.

• If this is not the case, you can redo the automatic setting.

The SRU 5040 will then search for a code that works better.

– After the SRU 5040 has run through all the known codes, the search

will stop automatically and TV in the selector window will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

For DVD,VCR and STB this time is 2 minutes

Manually setting the remote control

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the

code list at the back of this manual. One or

more four-figure codes are shown for each

brand. Note the first code.

Be careful! There are separate tables for TV, video,

DVD, etc.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

Make sure you use the codes from the correct table.

3Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

4Keep keys1 and 3 pressed simultaneously

for five seconds until TV in the selector

window flashes twice and then remains lit.

5Then enter the code noted in step 2 using the digit keys.

– TV in the selector window will now flash twice.

If TV flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU 5040 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRU 5040 is ready

for use. Do not forget to note your code.

Instructions for use

English

• If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . . . switches TV,VCR, DVD or STB on or off.

2LEARN. . . . . . . . . . . . . switches the SRU 5040 into learning mode.

3. . . . . - teletext on/off ( );

- text off ( );

- wide screen TV ( );

- text hold ( ).

4MENU. . . . . . . . . . . . . . turns the menu on and off.

5Cursor keys . . . . . . . . cursor up, down, left, right in a menu.

6AV . . . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

7s. . . . . . . . . . . . . . . . . . . mutes the sound of the TV.

8- VOL + . . . . . . . . . . . . . adjusts the TV volume.

9Digit keys . . . . . . . . . . direct choice of channels and other functions.

0SHIFT. . . . . . . . . . . . . . for extra functions.When pressed at the same

time as a second key, the second key will get

another function. All blue labelled keys can be

used together with SHIFT. For example:

SHIFT + INSTALL . installs your TV

SHIFT + STORE . . . stores TV settings

Try out other combinations with the SHIFT-key on your device in order to

find out which functions are available.

Only functions featured on the original remote control are available.

!5. . . . . . . . . . . . . . . . . . - red teletext key

- rewind (VCR/DVD)

2. . . . . . . . . . . . . . . . . . . - index

- play (VCR/DVD)

6. . . . . . . . . . . . . . . . . . - blue teletext key

- wind (VCR/DVD)

9. . . . . . . . . . . . . . . . . . . - green teletext key

- stop (VCR/DVD)

0. . . . . . . . . . . . . . . . . . . record

;. . . . . . . . . . . . . . . . . . . - yellow teletext key

- pause (VCR/DVD)

@/. . . . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

#22/ SURROUND . . selects previous programme/channel.

selects surround modes.

$- PROG +. . . . . . . . . . . selects a previous or following channel.

%GUIDE . . . . . . . . . . . . . opens electronic TV program guide (STB).

^OK . . . . . . . . . . . . . . . . . confirms your selection.

&BACK . . . . . . . . . . . . . . jumps back one level in the menu or turns off

the menu.

*SELECT. . . . . . . . . . . . selects TV, DVD, STB or VCR mode.

Instructions for use

English

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

4. Extra possibilities

Adjusting device selection (Mode selector)

The SRU 5040 is default set for operating TV,VCR, STB (settop box, satellite

or cable decoder) and DVD.You can select the device you wish to operate

with the SELECT key (mode selector). Each option allows operation of one

device only. If desired, you can program the SELECT key (mode selector) to

select a different kind of device. For example, if you want to operate a

second TV.

In the following example you will see how to configure the STB mode for a

second TV.

1Switch on the second TV.

2Press the SELECT key to select STB.

Press the key until STB lights up in the

selector window.

3Then keep keys 1 and 6 on the SRU 5040

pressed simultaneously for five seconds, until

STB in the selector window lights up.

4Press keys 9, 9 and 2, in that order.

5Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

6Press the 1 key.

– STB in the selector window flashes twice.

STB will now allow you to operate your

second TV.

7Program the SRU 5040 to operate the second TV.

See ‘Setting the remote control’.

Adding a function to the remote control

If you want to add a function to the SRU 5040, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code

for the extra function.

Instructions for use

English

Learn a key

IIf you miss certain functions from your original remote control on the

SRU 5040, the SRU 5040 can learn these functions from the original remote

control.You can store a fuction under any of the available keys onthe

SRU 5040, except LEARN, SELECT and SHIFT. Please, note that any function

already stored under a key will be deleted.

Example for VCR:

Make sure you have the original VCR remote control at hand.

1Select the device mode VCR, with the

SELECT key.

2Press the LEARN key and the target key on

the SRU 5040 simultaneously for 5 seconds,

until VCR in the selector window blinks twice

and then remains lit.

3Place both remote controls on a flat surface

(like a coffee table) and aim them head-to-

head with about 5 - 10 cm in between.

4Press the button you want to copy on the original remote control.

– If the SRU 5040 has learned the code,VCR in the selector window

blinks twice to confirm the signal is stored.

– If VCR blinks once for a longer period, the IR signal is not learned by the

SRU 5040. Please, try a few times and make sure the remote controls

are aligned as described in step 3.

If the SRU 5040 cannot learn the code after several times trying,

it is possible that:

– The IR signal of your original device is out of range (the SRU 5040 can

only learn IR signals with a carrier signal of 30-60kHz.

– The memory of the SRU 5040 is full.

– The SRU 5040 stopped the learning process after 20 seconds if no

IR signals are found. Check if your original remote control is working

correctly.

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the SRU 5040 pressed

simultaneously for five seconds, until one of

the device indicators (TV, DVD, STB,VCR)

lights up in the selector window.

Instructions for use

English

2Press keys 9, 8 and 1, in that order.

– The device indicator in the selector window

flashes twice. All original functions have now

been restored and any extra functions have

been deleted.

5. Troubleshooting

• Problem

– Solution

• The device indicators in the selector window (TV, DVD, STB and VCR)

blink four times after every key press.

– The remote control is indicating that its batteries are running low. Replace the old

batteries with two new AAA batteries.

• The device you want to operate does not respond and it’s indicatior in

the selector window does not flash when you press a key.

– Replace the old batteries with two new AAA batteries.

• The device you want to operate does not respond but it’s indicatior in

the selector window does flash when a key is pressed.

– Point the SRU 5040 at the device and make sure that there are no

obstructions between the SRU 5040 and the device.

• The SRU 5040 does not respond properly to commands.

– Maybe you are using the wrong code.Try programming the SRU 5040 again

using another code, which is mentioned under the brand of your device, or

reset for automatic search to find the right code.

If the device still does not respond, call our helpline.

• The Teletext keys do not work.

– Find out whether your TV is equipped with Teletext.

• You have difficulties operating all of the functions on your device.

– Maybe the SRU 5040 has to be adapted to the model of the device.

Call our helpline for details.

• Your brand of device is not in the code list.

– Try to set the SRU 5040 automatically.

See ‘Automatically setting the remote control’.

• None of the codes works during manual setting of the remote control.

– If that is the case, follow the instructions under

‘Automatically setting the remote control’.

6. Need help?

If you have any questions about the SRU 5040, you can always contact us.

You will find our contact details after the code list at the back of this manual.

Read this manual carefully before you make a call.You can solve most of the

problems yourself. If you cannot find any answers to your problems, write

down the details of your device shown in the code list at the back of this

manual.This will help our operators to assist you better and more quickly.

Look up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make sure

the device is to hand so that our operators can help you determine whether

your remote control is working properly.

The model number of your Philips universal remote control is SRU 5040/10.

Date of purchase: ......../......../........

(day/month/year)

Instructions for use

English

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Fernbedienung Handbücher

Philips

Philips Pronto TSU3000 Bedienungsanleitung

Philips

Philips Perfect replacement SRC2063WM/17 Bedienungsanleitung

Philips

Philips SRU3030/10 Bedienungsanleitung

Philips

Philips SRP2003WM Bedienungsanleitung

Philips

Philips SBCRU510/00B Bedienungsanleitung

Philips

Philips SBCRU125 Bedienungsanleitung

Philips

Philips SBC RU 230/00 Bedienungsanleitung

Philips

Philips SRP 3004/53 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips PRONTO TSU7500 Bedienungsanleitung

Philips

Philips SBCRU520/00B Bedienungsanleitung

Philips

Philips SBC RU 530 Bedienungsanleitung

Philips

Philips G96SVC Bedienungsanleitung

Philips

Philips 29PT8423/12 Bedienungsanleitung

Philips

Philips SRU 3040/10 Bedienungsanleitung

Philips

Philips SBC RU 520 Bedienungsanleitung

Philips

Philips SBCRU530/88 Bedienungsanleitung

Philips

Philips SBC RU 455 Bedienungsanleitung

Philips

Philips SRU2103S Bedienungsanleitung

Philips

Philips SBC RU 520 Bedienungsanleitung

Philips

Philips Prestigo SRU8015/34 Bedienungsanleitung

Philips

Philips SRU3003 Bedienungsanleitung

Philips

Philips Pronto TSU 2000 Bedienungsanleitung

Philips

Philips Perfect replacement SRU5107WM Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung