Philips VC863651T Bedienungsanleitung

Covert Observation Camera

Smoke Covert B&W Camera -VC863651T

Smoke Covert Colour Camera -VC963651T

Contents

English .........................................................................2

Français ......................................................................6

Español ....................................................................10

Português ...............................................................14

Nederlands ...........................................................18

Deutsch ...................................................................22

Italiano ....................................................................26

Dansk ........................................................................30

Svenska ....................................................................34

Norsk ........................................................................38

Suomi ........................................................................42

Eλληviká .................................................................46

Technical specifications ....................................49/50

2345

2-3 4-5

2345

2-3 4-5

2345

Fig.C

COLOUR CCD CAMERA

Pick-up device 1/3”(Solid state CCD)

No. of picture elements (HxV)

512 x 582 PAL interlaced (Europe)

Horizontal resolution 380TVL

Gain control Automatic,32 dB

Iris Electronic iris

Light sensitivity 0.3 lux (minimal acceptable picture)

3.0 lux (50 IRE,100% scene

refelection)

Signal to noise ratio 49 dB at 200-25000 lux,25˚C

Built-in microphone electret

Lens relative aperture F 2.0

Lens viewing angle 64˚(H) x 50˚(V)

Power supply 24Vdc (via system cable)

When cable length exceeds 200m

a power adaptor is required

(VCM1162/00R orVC11625)

Power consumption <2.5W

System cable 4-wire twisted pair‘telephone’cable

System connectors RJIIE modular

Ambient temperature

operating -10° ~ +45° C

storage -25° ~ + 70° C

Ambient humidity

operating 20% ~ 90%RH

storage up to 99%RH

Dimensions 168 mm (diam) x 65 mm (h)

Weight 194 g.

Specifications may be changed without notice.

Technical specification

B/W CCD CAMERA

Pick-up device 1/3”(Solid state CCD)

No. of picture elements (HxV)

512 x 582 (CCIR)

Horizontal resolution 380TVL

Gain control Automatic

Iris Electronic iris

Light sensitivity 0.2 lux (minimal acceptable picture)

0.5 lux (50 IRE,100% scene

refelection)

Spectral sensitivity range 400 ~ 1000nm

Signal to noise ratio >48 dB

Built-in microphone electret

Lens relative aperture F 2.0

Lens viewing angle 64˚(H) x 50˚(V)

Power supply 9.6 - 27Vdc (via system cable)

When cable length exceeds 300m a

power adaptor is required (VSS2904)

Power consumption <2.5W

System cable 4-wire twisted pair‘telephone’cable

System connectors RJIIE modular

Ambient temperature

operating -20° ~ +55° C

storage -25° ~ + 70° C

Ambient humidity

operating 20% ~ 90%RH

storage up to 99%RH

Dimensions 168 mm (diam) x 65 mm (h)

Weight 176 g.

Specifications may be changed without notice.

Fig.A

Fig.B

5049

Electro Magnetic Compatibility (EMC)

The cameras comply with the EN55022 and EN500082-1 European EMC

standards and the FCC part 15 class B rules (US standard).

This device complies with part 15 of the FCC rules under test conditions

that included use of system cables and connectors between system

components.If you have any problem,contact your dealer.

Operation is subject to the following two conditions:

1 This device may not cause harmful interference.

2 This device must accept any interference received,including interference

that may cause undesired operation.

The equipment conforms with the EMC directive and low-voltage

directive.

Warnings

Any unauthorized modification to this equipment may cause violation of

the FCC rules resulting in the revocation of the authorization to operate

the equipment.

To prevent fire or shock hazard,do not expose this accessory to rain or

moisture.Do not attempt to disassemble the camera.In order to prevent

shock and fire hazard,do not remove screws or covers.There are no

user-serviceable parts inside.

The exclamation mark within a triangle is intended to alert the

user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the

appliance.

Position

First you need to determine where the camera is to be installed.The best

results are obtained when the camera looks a little downwards and not

into a bright source of light.(Fig.A-1)

●Hold the camera in your hand at the spot where you want to install it and

check on the monitor whether the camera does actually cover the

required area from that spot.

●Check if the cable length compensation selector (fig.A-4) (fig.B-4) is set

to the correct length of the system cable (0-300m/900ft max.) connecting

monitor and camera.

●Mount the housing ring to the ceiling,then position housing as required

and secure using screws supplied.(fig.A-2 & 3) (fig.B-2 & 3).

Focus adjustment

The focus is preset.No further adjustment is possible.

System connection

Connect the cable to the output of the camera.

The lens

Caution: Do not touch the glass of the lens.This could damage the

delicate coating on its surface. If the lens has to be cleaned, use a

special lens cleaning tissue, available at any good camera store.

Focus range

The built-in lens provides an optimal image sharpness for objects between

1 metre and infinity (depth of field).

Observation Camera

Introduction

Your new CCD camera is developed for use with the Philips Observation

System Monitor,registering images via the monitor,as well as input

contacts for connecting external alarm devices.

Installation

Warning: Disconnect the monitor from the mains supply before

disconnecting a camera or accessory.

Only operating the stand-by key is not sufficient.

When the mains supply is connected,all camera lines are scanned.The

monitor uses this to register the camera configuration of the system and

to check whether any modifications have been made.

Alarm inputs

N.B. B&W Cameras only.

The camera has a three-pole terminal block for connecting alarm sensors,

such as door contacts.For normally open (N.O.) sensors,connect to

contacts N.O.(fig.A-5).For normally closed (N.C.) sensors,connect to

contacts N.C.(fig.A-5).

GBGB 32

The illustrations to which this manual refers, are shown on the front and

back jacket flap

Cable

A 4-wire sytem cable (see specifications) is supplied as standard.

For optimum picture quality a standard dual‘twisted-pair’(telephone)

cable should be used (fig.C).

The maximum distance that can be bridged (without a cable extension

adapter) between the monitor and the cameras is 300 meters (200 meters

for colour cameras).

Caution: The plugs used for the observation system have the same

dimensions as standard telephone plugs.Never connect a telephone to

the camera or system monitor.

Tips for maintenance

Cleaning - The outside of the camera can be cleaned with a moist fluff-

free cloth or a chamois leather cloth.

When cleaning the lens a special lens cleaning cloth should be used.

Do NOT use cleaning fluids based on alcohol,methylated spirit,

ammonia etc..

Avoid direct contact with water.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Sicherheitskamera Handbücher

Philips

Philips M100D Bedienungsanleitung

Philips

Philips LTC0335 Bedienungsanleitung

Philips

Philips VCM8175/00T Bedienungsanleitung

Philips

Philips WelcomeEye Connect Bedienungsanleitung

Philips

Philips VCM8120/01T Bedienungsanleitung

Philips

Philips VCM8120/00T-/01T Bedienungsanleitung

Philips

Philips VCM9175/00T Bedienungsanleitung

Philips

Philips Inca 311 Bedienungsanleitung

Philips

Philips VCM6350 Bedienungsanleitung

Philips

Philips VCM3400/00 Bedienungsanleitung

Philips

Philips LTC 0330/x1 Series Bedienungsanleitung

Philips

Philips VC863652T Bedienungsanleitung

Philips

Philips VCM 6110/00T Bedienungsanleitung

Philips

Philips InSightHD M120E Bedienungsanleitung

Philips

Philips VCM8936/00T Bedienungsanleitung

Philips

Philips M120 Bedienungsanleitung

Philips

Philips LTC0240/10 Bedienungsanleitung

Philips

Philips VCM6350/00T Bedienungsanleitung

Philips

Philips LTC 9450 Bedienungsanleitung

Philips

Philips VCM8121/00T-/01T Bedienungsanleitung

Philips

Philips LTC0350/51 Bedienungsanleitung

Philips

Philips LTC1133/11 Bedienungsanleitung

Philips

Philips VCM7177/54T Leitfaden

Philips

Philips CCD Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung