Philips AJT600 Bedienungsanleitung

www.philips.com/welcome

Always there to help you

AJT600/37

User manual

Question?

Contact

Philips

2EN

Contents

1 Important safety instruction 3

2 Your Bluetooth Speaker 4

What's in the box 4

Overview of the main unit 5

3 Get started 6

Connect power 6

Set time 7

Turn on 7

4 Play from Bluetooth device 7

Bluetooth reset 7

5 Play audio from an external device 8

6 Other features 8

Set alarm timer 8

Set sleep timer 9

Adjust display brightness 9

7 Product information 10

Specications 10

8 Troubleshooting 10

9 Notice 11

Disposal of your old product 11

3EN

1 Important safety

instruction

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

i Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

j Only use attachments/accessories

specied by the manufacturer.

k Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

l Unplug this apparatus during lightning

storms or when unused for long periods

of time.

m Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

n Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to

the unit:

• Install all batteries correctly, + and - as

marked on the unit.

• Do not mix batteries (old and new or

carbon and alkaline, etc.).

• Remove batteries when the unit is not

used for a long time.

• The battery (battery or batteries

installed) shall not be exposed to

excessiveheatsuchassunshine,reor

the like.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

the apparatus (e.g. liquid lled objects,

lighted candles).

q This product may contain lead and

mercury. Disposal of these materials

may be regulated due to environmental

considerations. For disposal or recycling

information, please contact your local

authorities or the Electronic Industries

Alliance: www.eiae.org.

r Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

4EN

Warning

•Never remove the casing of this Bluetooth speaker.

•Never place this Bluetooth speaker on other electrical

equipment.

•Keep this Bluetooth speaker away from direct sunlight,

nakedamesorheat.

•Toreducetheriskofreorelectricshock,donot

expose this apparatus to rain or moisture.

•Ensure that you always have easy access to the power

cord, plug or adapter to disconnect this Bluetooth

speaker from the power.

2 Your Bluetooth

Speaker

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

What's in the box

AJW600

Short User Manual

www.philips.com/welcome

Always there to help you

Question?

Contact

Philips

5EN

Overview of the main unit

a SOURCE

• Select a source.(Bluetooth/AUDIO IN)

• Press repeatedly to switch to standby mode.

b SLEEP

• Set sleep timer.

c SNOOZE/BRIGHTNESS

• Snooze alarm.

• Adjust display brightness.

d Display panel

• Show current information.

e AL1/AL2

• Activate or deactivate alarm timer.

f VOLUME +/-

• Adjust volume.

NIOIDUA

g First Knob (HOUR)

• Adjust hour.

h Second Knob (MINUTE)

• Adjust minute.

i Third Knob (CLOCK/SET TIME/SET AL1/

SET AL2)

• Set clock.

• Set alarm.

j BUZZ/SOUND 1/SOUND 2

• Select an alarm source for Alarm 1 and

Alarm 2.

• Charge your devices through USB

cable (not included).

l AUDIO IN

• Connect an external audio device.

6EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Connect power

The unit can only be powered by supplied AC

power. Batteries are only used for time and

alarm backup if not connected with AC power.

Option 1:AC power

Warning

•Risk of product damage! Make sure that the power

supply voltage corresponds to the voltage printed on

the back or the underside of the unit.

•Risk of electric shock! When you disconnect the AC

power, always pull the plug from the socket. Never pull

the cord.

Connect the AC power cord to the wall socket.

Tip

•To save energy, turn the unit off after use.

Option 2: Battery power

Caution

•Batteries contain chemical substances, so they should

be disposed of properly.

Note

•Batteries are not supplied with the accessories.

•bAt shows on the display when the battery level is low.

1 Open the battery compartment.

2 Insert 2 batteries (type: 1.5V LR6/AA) with

correct polarity (+/-) as indicated.

3 Close the battery compartment.

7EN

Set time

1 Rotate the Third Knob to "SET TIME" to

activate clock setting mode.

» Hour and minute digits blinks.

2 Rotate the First Knob to adjust the hour.

3 Rotate the Second Knob to adjust the

minute.

4 Press OK on the First Knobtoconrm.

» The setting time is displayed.

5 Rotate the Third Knob to CLOCK after

setting.

» The hour and minute digits stops

blinking.

Turn on

The clock radio turns on automatically once

your plugged in.

4 Play from

Bluetooth

device

Note

•The effective operation range between the Bluetooth

speaker and the paired device is approximately 10

meters (30 feet).

•Keep this Bluetooth speaker away from other electronic

devices that may cause interference.

•Make sure that the Third Knob switches to CLOCK

before setting.

1 Press SOURCE repeatedly to select

Bluetooth source.

» onthedisplaypanelashes.

2 Activate the Bluetooth function in your

Bluetooth device (see the device user

manual).

3 Select “AJT600” displayed on your device

for pairing.

» If connection is successful, the

Bluetooth speaker beeps twice and

steadily on.

4 Start music play on your Bluetooth device.

» If Bluetooth disconnected, the music

will pause. Press on the Bluetooth

device to start play again.

Bluetooth reset

In Bluetooth mode, press OK ontherst

knob for over 5 seconds to erase all pairing

informations.

» "BT RESET" displayes on the panel.

• The Bluetooth speaker enters

Bluetooth mode automatically after

erase completed.

8EN

5 Play audio from

an external

device

Note

•Make sure that the Third Knob switched to CLOCK

before setting.

•The speaker can not pair with other Bluetooth devices

in AUDIO IN mode.

You can listen to audio from an external device

through this Bluetooth speaker.

1 Connect an audio cable to:

• the AUDIO IN socket on the

Bluetooth speaker.

• the headphone socket on an external

device.

2 Press SOURCE repeatedly to select the

Audio-in source.

» The on the display panel lights up.

3 Play audio on the external device (refer to

its user manual).

6 Other features

Set alarm timer

You can set two alarms to ring at different time.

Note

•Make sure that you have set the clock correctly.

1 Rotate the Third Knob to SET AL1 or SET

AL2 to activate alarm setting mode.

» The / and time digits blink.

2 Rotate the First Knob to adjust the hour.

3 Rotate the Second Knob to adjust the

minute.

4 Press OK on First Knobtoconrm.

5 Rotate the Third Knob to CLOCK after

setting.

Select alarm source

You can select buzzer, sound 1,or sound 2 as

your alarm sound.

ALARM

BUZZ 12

9EN

Activate/deactivate alarm timer

Note

•Make sure that the Third Knob switched to CLOCK

before setting.

Press AL1/AL2 to activate or deactivate the

alarm timer.

» The / appears if alarm timer is on and

disappears if it is off.

To stop the ringing alarm, press the

corresponding AL1/AL2.

» The alarm repeats ringing for the next day.

Snooze the alarm

When alarm sounds, press SNOOZE.

» The alarm snoozes and repeats ringing nine

minutes later.

Set sleep timer

Note

•Make sure that the Third Knob switched to CLOCK

before setting.

This Bluetooth speaker can switch to standby

mode automatically after a preset period.

• Press SLEEP repeatedly to select the sleep

timer period (in minutes).

» When the sleep timer is activated,

appears.

To deactivate the sleep timer:

• Press SLEEP repeatedly until [OFF] (off)

appears.

15 30 60 90 120

OFF

Adjust display brightness

10EN

7 Product

information

Note

•Product information is subject to change without prior

notice.

Specications

Amplier

Rated Output Power 5W RMS

Bluetooth

specication

V3.0+EDR

Supportedproles HFP v1.5, AD2P v1.2,

HSP v1.2

Range 10 m (Free space)

General information

Power supply

-AC Power

-Battery

Model:

ASSA36A-090160;

Input: 100-240 V ~,

50/60Hz, 0.6A;

Output: 9.0V 1600

2 x AA batteries

Operation Power

Consumption

<15 W

Standby Power

Consumption

<1 W

Dimensions - Main

Unit (W x H x D)

195 x 99 x 98 mm

Weight - Main Unit 0.70 kg

8 Troubleshooting

Warning

•Never remove the casing of this device.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

device, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips Web page (www.

philips.com/support).When you contact Philips,

make sure that the device is nearby and the

model number and serial number are available.

No power

•Ensure that the power cord is connected

securely.

•Ensure that there is power at the power

supply socket.

•Ensure that the batteries are installed

correctly.

No response from the Bluetooth speaker

•Disconnect and reconnect the AC power

plug, then turn on the Bluetooth speaker

again.

•Check if you have selected the correct

audio source.

•Make sure that your Bluetooth device is

within the effective operation range.

Alarm does not work

•Set the clock/alarm correctly.

Clock/alarm setting erased

•Power has been interrupted or the power

plug has been disconnected.

•Reset the clock/alarm.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Sprecher Handbücher

Philips

Philips SPA2210R/10 Bedienungsanleitung

Philips

Philips Essence 5000 Series Bedienungsanleitung

Philips

Philips BT25 Bedienungsanleitung

Philips

Philips HTL2183B/05 Bedienungsanleitung

Philips

Philips FB 840 Bedienungsanleitung

Philips

Philips SB5200 Bedienungsanleitung

Philips

Philips FB690 Bedienungsanleitung

Philips

Philips Fidelio DS3880W Bedienungsanleitung

Philips

Philips HTL2151 Bedienungsanleitung

Philips

Philips HTS8160B/98 Bedienungsanleitung

Philips

Philips HTL1190BX Bedienungsanleitung

Philips

Philips SPA30W Bedienungsanleitung

Philips

Philips SBT310W/37 Bedienungsanleitung

Philips

Philips HTL2153B Bedienungsanleitung

Philips

Philips SPA7355 Bedienungsanleitung

Philips

Philips SBCBA170 Bedienungsanleitung

Philips

Philips BT4080 Bedienungsanleitung

Philips

Philips SBT30/93 Bedienungsanleitung

Philips

Philips SBCBA110/BL Bedienungsanleitung

Philips

Philips CSS5530G Bedienungsanleitung

Philips

Philips SPA3200 Bedienungsanleitung

Philips

Philips HTB5544D Bedienungsanleitung

Philips

Philips 2000 series Bedienungsanleitung

Philips

Philips HTL3110B Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung