Philips BT2000 Bedienungsanleitung
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
BT2000
Question?
Contact
Philips
1EN
Contents
1 Important 2
2 Your Bluetooth speaker 3
Introduction 3
What's in the box 3
Overview of the speaker 4
3 Get started 5
Attach the string 5
Charge the built-in battery 5
Turn on/off 5
4 Play 6
Play from Bluetooth devices 6
Play from external devices 6
Fold or unfold the speaker 7
Adjust volume 7
5 Product information 8
Specications 8
6 Troubleshooting 9
General 9
About Bluetooth device 9
7 Notice 10
Compliance 10
Care of the environment 10
Trademark notice 11
2EN
1 Important
Warning
•Never remove the casing of this speaker.
•Never lubricate any part of this speaker.
•Never place this speaker on other electrical equipment.
•Keep this speaker away from direct sunlight, naked
amesorheat.
• Make sure that there is enough free space
around the speaker for ventilation.
• Only use attachments or accessories
speciedbythemanufacturer.
• The battery shall not be exposed to
excessiveheatsuchassunshine,reorthe
like.
• The speaker shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
thespeaker(e.g.liquidlledobjects,lighted
candles).
Note
•The type plate is located on the bottom of the product.
3EN
2 Your Bluetooth
speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this speaker, you can enjoy audio from
your Bluetooth-enabled devices, or other
external audio devices.
What's in the box
Check and identify the contents of your
package:
• Speaker
• USB cable for charging
• String for carrying
• Short user manual
• Safetyandnoticeleaet
4EN
Overview of the speaker
a DC IN
• Recharge the built-in battery with a
USB cable.
b AUDIO IN
• Connect an external audio device.
c LED indicator
d OFF/AUDIO IN/
• Select Bluetooth or AUDIO IN source.
• Turn the speaker off.
e PAIRING
• Disconnect Bluetooth connection.
• Enter Bluetooth pairing mode.
a
b
cd
e
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Attach the string
For easy carrying, attach the supplied string to
this speaker as illustrated.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Note
•Before use, fully charge the built-in battery.
•The micro USB socket is for charging only.
•Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Connect the supplied USB cable between
• the DC IN socket on the speaker, and
• a USB socket of a computer.
Charging indicator status
The LED indicator indicates the battery status.
Under charging Fully charged
"OFF"
mode
Flashing white Off
"AUDIO
IN" mode
Flashing white Solid white
"Bluetooth"
mode
Flashing blue
or solid blue
(depending
on Bluetooth
connection
status)
Flashing blue
or solid blue
(depending
on Bluetooth
connection
status)
Turn on/off
• To turn the speaker on, slide the
OFF/AUDIO IN/ switch to or AUDIO
IN.
• : Listen to an external Bluetooth
device through Bluetooth connection.
• AUDIO IN: Listen to an external
device through an audio input cable.
• To turn the speaker off, slide the switch to
OFF.
DC IN
6EN
4 Play
Play from Bluetooth devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Play from Bluetooth devices
Note
•Make sure that your Bluetooth device is compatible
with this speaker.
•Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•The speaker can memorize a maximum of 4 paired
devices.
•Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•Keep away from any other electronic device that may
cause interference.
•The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1 Slide the OFF /AUDIO IN/ switch to .
» TheLEDindicatorashesblue.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3 When [Philips BT2000] is displayed on
your device, select it to start pairing and
connection. If necessary, input “0000” as
the pairing password.
» After successful connection, the
speaker beeps twice, and the LED
indicator turns solid blue.
4 Play audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
To disconnect the Bluetooth-enabled device:
• Press and hold PAIRING for two seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» TheLEDindicatorashesblue.
To reconnect the Bluetooth device:
• Next time you turn on the speaker, the
speaker will reconnect the last connected
device automatically; or
• On your Bluetooth device, select "Philips
BT2000" on your Bluetooth menu to start
connection.
To connect another Bluetooth-enabled device:
1 Press and hold PAIRING for two seconds
to disconnect the currently connected
device;
» The speaker enters Bluetooth pairing
mode.
2 Connect another Bluetooth device.
LED indicator Description
Flashing blue Connecting;
Waiting for pairing
Solid blue Connected
Play from external devices
With this speaker, you can also listen to an
external audio device such as an MP3 player.
1 Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
7EN
2 Slide the OFF /AUDIO IN/ switch to
AUDIO IN.
» The LED indicator becomes white.
3 Play audio on the external device (refer to
its user manual).
Fold or unfold the speaker
• To achieve better bass effect, unfold the
speaker as illustrated.
• To make the speaker smaller, fold the
speaker.
Adjust volume
During play, use the volume control on your
Bluetooth or external device to adjust volume.
AUDIO-IN
8EN
5 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 W RMS
Frequency Response 80 -16000 Hz,
±3 dB
Signal to Noise Ratio >70 dBA
Audio-in Input 300mV RMS
Speaker
Speaker Impedance 4 ohm
Speaker Driver 4.5 cm full range
Sensitivity >81dB/m/W±3dB/
m/W
Bluetooth
Bluetooth Version V3.0
BluetoothProle A2DP, AVRCP
Bluetooth Frequency
Brand
2.4 GHz ~ 2.48 GHz
Bluetooth Range 10 m (Free space)
General information
Power Supply (through
USB socket)
5 V 0.5 A
Built-in Battery Li-polymer battery
(3.7 V, 500 mAh)
Dimensions - Main Unit
(W x H x D)
99 x 77 x 93 mm
Weight - Main Unit 0.15 kg
Inhaltsverzeichnis
Andere Philips Sprecher Handbücher
Philips
Philips SPA4350 Bedienungsanleitung
Philips
Philips SBT30/93 Bedienungsanleitung
Philips
Philips MMS171/17 Bedienungsanleitung
Philips
Philips HTL9100/93 Bedienungsanleitung
Philips
Philips HTL3160B/93 Bedienungsanleitung
Philips
Philips MMS430W Bedienungsanleitung
Philips
Philips HTL2150 Bedienungsanleitung
Philips
Philips SBCBA110/BL Bedienungsanleitung
Philips
Philips DS3880W/93 Bedienungsanleitung
Philips
Philips Fidelio SoundRing DS3801W/37 Bedienungsanleitung
Philips
Philips MMS 223 Bedienungsanleitung
Philips
Philips SPA3200/17 Bedienungsanleitung
Philips
Philips MMS121 Bedienungsanleitung
Philips
Philips LSBS900/00S Bedienungsanleitung
Philips
Philips BT6000 Bedienungsanleitung
Philips
Philips Fidelio SoundSphere Bedienungsanleitung
Philips
Philips 2000 series Bedienungsanleitung
Philips
Philips 3000 series Bedienungsanleitung
Philips
Philips HTL3120 Bedienungsanleitung
Philips
Philips CSP6910/00 Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung