Philips TAW6505 Bedienungsanleitung

User manual

TAW6505

www.philips.com/support

Wireless Home Speaker

Contents

Safety 3

Help and support 3

Important 3

What’s in the box 4

Overview of the speaker 4

Your wireless speaker 4

Plug in the power 6

Turn on and o 6

Get started 6

Connect to Wi-Fi (Wireless Operation) 7

Connect 7

Pairing with Ambilight TV 10

Follow Music 10

Mood Light mode 11

Adjust brightness 11

LED light O 12

Overview 12

Lighting operation 10

Play from Bluetooth devices 13

Control playback 13

Listen to an external device 13

Listen to Spotify 13

Upgrade Firmware 14

Play 13

Product specications 15

Notice 18

Troubleshooting 16

For 5G WiFi Device

Important safety instructions

Warning

Safety

Help and support

1 Important

Follow the instructions on the website to

select your language, and then enter your

product model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note

down the model number and serial number

of your product.You can nd this information

on the back or bottom of your product.

•Make sure that the power supply voltage

corresponds to the voltage on the back or

the underside of the unit.

•The speaker shall not be exposed to

dripping or splashing.

•Do not place any source of danger on the

speaker (e.g. liquid filled objects, lit

candles).

•Make sure that there is enough free space

around the speaker for ventilation.

•Please use the speaker safely in an

environment with temperature between

0°C and 45°C.

•Only use attachments and accessories

specified by the manufacturer.

The device for operation in the band 5150–5350

MHz is only for indoor use to reduce the

potential for harmful interference to co-channel

mobile satellite systems.

•Never remove the casing of this speaker.

•Never lubricate any part of this speaker.

•Place this speaker on a flat, hard and stable surface.

•Never place this speaker on other electrical

equipment.

•Only use this speaker indoors. Keep this speaker

away from water, moisture and liquid-filled

objects.

•Keep this speaker away from direct sunlight, naked

flames or heat.

•Risk of explosion if a battery is replaced by an

incorrect type.

For extensive online support, visit

www.philips.com/support to:

•download the user manual and the quick

start guide

•watch video tutorials (available only for

selected models)

•find answer to frequently answered

questions (FAQs)

•email us a question

•chat with our support representative

•Play, pause or resume in

Bluetooth/Play-Fi playback.

•Press and once to select next

LED light color.

•Press to increase or decrease volume.

•Press and once to increase the

LED light brightness.

•Press and once to decrease the

LED light brightness.

What’s in the box

Overview of the speaker

Wi-Fi LED indicator (White)

LED State Status

Double blink

Constant on

Blink

Wi-Fi Setup button

AC ∼ socket

For service

BACK

TOP

2 Your wireless

speaker

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips oers, register your

product at www.philips.com/support.

Check and identify the contents of your

package:

•Speaker

•Power cable

•Quick start guide

•Safety sheet

•Worldwide warranty

•Indicate the status.

•Press and hold for 3 seconds to enter

the pairing with Ambilight TV mode.

•Press to select the LED light mode.

Wi-Fi Access Point (AP)

mode

Wi-Fi Protected Setup

(WPS) mode

Connected / Pairing

successful

•Trigger Wi-Fi setup for Play-Fi.

•Press and hold the button for 3

seconds to active the WPS mode.

•Press and hold the button for 8

seconds to active the AP mode.

•USB socket for speaker software

upgrade only. No playback function.

•Connect to the power supply.

AUX IN

RESET

Built-in LED light

•Press and hold to activate the pairing

function or disconnect the existing

paired Bluetooth device.

•Press with a sharp object for 5

seconds to restore factory defaults.

•Audio input socket (3.5mm) for an

external audio device.

Turn on and o

LED State Status

3 Get started

Plug in the power

•The speaker is powered by AC input.

•Connect the AC IN socket on the

speaker to an outlet (19V 2.1A) by

using the provided power cable.

•Risk of product damage! Ensure that

the power supply voltage

corresponds to the voltage printed on

the back or the underside of the unit.

Attempting to connect

to the router

Wi-Fi connection is

successful

Wi-Fi connection

failed

Turn around in blue

color for 20 seconds

Turn o

Blink red for 5

seconds

•The speaker will turn off automatically after 15 minutes

without user operations and music playback.

Note

Unplug the power cable from the main socket

to turn o the speaker.

(For iOS and Android version)

4 Connect

Connect to Wi-Fi (Wireless

Operation)

By connecting this unit and mobile phones,

tablets (such as iPad, iPhone, iPod touch,

Android phones, etc.) to the same Wi-Fi

network, you can then use the Philips

Sound app powered by DTS Play-Fi to

control the soundbar to listen to audio les.

Connect your phone or tablet to the

same Wi-Fi network that you want to

connect your wireless speaker.

Download and install the Philips

Sound app powered by DTS Play-Fi

on a phone or tablet.

Press and hold (Wi-Fi) button

located at the back cabinet for 8 sec to

trigger the Wi-Fi connection.

Until the speaker make a second

tone and then release the button.

•Make sure your router is turned on

and working properly.

Wait until the Wi-Fi light indicator on the

top panel turns from a fast blink to a

slow pulse. Slow pulsing indicates that

the speaker is entering the Wi-Fi setup

mode.

Launch the Philips Sound App powered

by DTS Play-Fi. Follow the instructions

in the App to connect this product to

your Wi-Fi network.

Two sound

Fast blink Slow pulse

Note

For iOS version only

•Go to Settings. •Select Wi-Fi setting.

After connection, you can change the

device name. There are several names

to choose from or create your own by

choosing Custom Name at the end of

the name list. Otherwise, it follows the

default name.

After connection, this product may

perform a software update. Upgrade to

the latest software when it is your rst

time set up. The software upgrade may

take several minutes. Do not unplug

your speaker, turn o your device, or

leave the network during the update.

After successful Wi-Fi connection, the

Wi-Fi light indicator on the top panel will

stop pulsing and turn solid. Once you set

up this product on your Wi-Fi network,

you can control it from any smartphone

or tablet on the same network.

Wi-Fi network used by iPhone should be

switched temporarily to Play-Fi device AP and

restart Philips Sound APP to complete the

product’s Wi-Fi setup. See the steps below:

•Select the Play-Fi

device in the Wi-Fi set

•Return to Philips

Sound App to

continue the set up.

AirPlay setup

Note

WPS mode

Note

Use AirPlay to set up the Wi-Fi connection of iOS

device (iOS7 or later) and soundbar.

After connection, this product may

perform a software update.

Upgrade to the latest software when it is

your rst time set up. The software

upgrade may take several minutes. Do not

unplug your speaker, turn o your device,

or leave the network during the update.

After connection, you can change the

device name. There are several names to

choose from or create your own by

choosing Custom Name at the end of the

name list. Otherwise, it follows the default

name.

Launch the Philips Sound App powered by

DTS Play-Fi. Follow the instructions in the

App to connect this product to your Wi-Fi

network.

After successful Wi-Fi connection, the

Wi-Fi light indicator on the front cabinet

will stop pulsing and turn solid.

Once you set up this product on your

Wi-Fi network, you can control it from

any smartphone or tablet on the same

network.

When using the APP to play music, the

display panel will show PLAY-FI.

iOS device: Settings > Wi-Fi > select home

network [Play-Fi Device (xxxxxx)].

Follow the instruction in Philips Sound

App powered by DTS Play-Fi to start

the pairing.

Press the WPS button

on your router.

The button is normally

marked with this WPS

logo.

Press and hold the Wi-Fi button for 4

seconds. You will hear a tone and the

Wi-Fi light will begin in double blink.

If your router has Wi-Fi Protected Setup

(WPS), you can set up the connection without

entering a password.

•WPS is not a standard feature on all routers. If your

router does not have WPS then use Standard Wi-Fi

Setup.

•Press the (Wi-Fi) button once if you want to exit

the WPS mode or it will automatically exit after 2

minutes.

•After connection, the product may perform a

software update. Upgrade is required after initial set

up. Without the upgrade, not all product features can

be available.

•When the first time setup is not successful, hold

down the Wi-Fi button on the speaker for 8 seconds,

until you hear the second tone and the Wi-Fi light is

changed to slow pulse. Reset the Wi-Fi connection,

restart the app and start the setup again.

•If you want to change from one network to another,

you need to set up the connection again. Press hold

down the (Wi-Fi) Wi-Fi button on the speaker for

8 seconds to reset the Wi-Fi connection.

Pairing with Ambilight TV

You can set the built-in LED light of the

speaker to follow the color of your Philips

Ambilight TV. Alternatively, you can set the

light to show a preset color style or you can

switch the light o.

Press the button repeatedly on the

speaker to switch the light mode: 1. Work

with Amblight, 2. Mood Light, 3. O.

Follow Music

Region/Year 2019 Series 2020 Series

OLED984/OLED934

OLED854/OLED804

8804/8204

7504/7394/7354/

7334/7304

OLED935

OLED865/OLED855/

OLED805

9435/9235/9005

8555/8545/

8535/8505

OLED984

OLED804

7374

OLED935

OLED805

8265/8215

5 Lighting

operation

•The pairing will time out after 2 minutes.

Europe

Asia Pacic

Note

Set up your speakers to follow the colors of

the Ambilight TV. The speaker will expand

the Ambilight eect from TV screen.

The speaker can work with the following

Philips Ambilight TV series:

Before starting the setup, make sure the

speaker and TV are connected to the

same Wi-Fi network.

Turn on the Phillips Ambilight TV. The

setup of Ambilight TV pairing is to be

done on the TV.

Activate the conguration as shown on

the Ambilight TV:

Settings > Ambilight > Ambilight

extension > Ambilight+Philips Wireless

Home Speakers > Congure.

Follow the set up instruction on the TV.

It will guide you to long press button

on the speaker to enter the pairing mode

with Ambilight TV.

When the speaker opens for pairing, the

LEDs blink in yellow.

When the speaker is paired with

Ambilight TV, the LED light on speaker

will followed the Ambilight TV.

If there is no Ambilight TV linked or TV is

disconnected, the LED light on speaker will

automatically switch to Follow Music during

music playback.

You can select one of the styles that follow

the dynamics of the sound.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Sprecher Handbücher

Philips

Philips FB 840 Bedienungsanleitung

Philips

Philips FB 860 Bedienungsanleitung

Philips

Philips SBCBM120/00 Bedienungsanleitung

Philips

Philips MMS8085B Bedienungsanleitung

Philips

Philips BT2000 Bedienungsanleitung

Philips

Philips Fidelio XS1 Bedienungsanleitung

Philips

Philips Fidelio Bedienungsanleitung

Philips

Philips AW9000 Bedienungsanleitung

Philips

Philips SPA2600/05 Bedienungsanleitung

Philips

Philips SPA1260 Bedienungsanleitung

Philips

Philips SPA4210/10 Bedienungsanleitung

Philips

Philips HTL3140B Bedienungsanleitung

Philips

Philips AD7000W/37 Bedienungsanleitung

Philips

Philips HTL2163B Bedienungsanleitung

Philips

Philips BT2500B/W-00 Bedienungsanleitung

Philips

Philips FWP1000/05 Bedienungsanleitung

Philips

Philips SPA1302/05 Bedienungsanleitung

Philips

Philips Fidelio AD7050W Bedienungsanleitung

Philips

Philips HTL2183B/96 Bedienungsanleitung

Philips

Philips STS9501/00 Bedienungsanleitung

Philips

Philips SBD4000 Bedienungsanleitung

Philips

Philips SBCBA140/00 Bedienungsanleitung

Philips

Philips SBCBC730/00 Bedienungsanleitung

Philips

Philips NTX400X Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung