Philips HTL2161B/F7 Bedienungsanleitung

User manual

HTL2161B/F7

For product support, visit

www.philips.com/support

EN: For further assistance, call the customer support service in your country.

• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer

Care Center at 1 (866) 226-6074

• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989;

Mexico city: 5887-9736

For Product recycling information, please visit - www.recycle.philips.com

Question?

Contact

Philips

1EN

Contents

1 Important 2

Help and support 2

Important safety instructions 2

Care for your product 4

Care of the environment 4

2 Your SoundBar 4

Main unit 4

Remote control 4

Connectors 5

3 Connect and set up 6

Placement 6

Connect to TV 7

Connect audio from TV and other devices 7

4 Use your SoundBar 8

Adjust the volume 8

Choose your sound 8

Play audio through Bluetooth 9

MP3 player 10

USB storage devices 10

Auto standby 10

Set display brightness 10

Apply factory settings 11

5 Update software 11

Check software version 11

Update software via USB 11

6 Wall mount 12

7 Productspecications 13

8 Troubleshooting 14

9 Notice 15

4EN

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This product may contain lead and mercury.

Disposal of these materials may be regulated

due to environmental considerations. For

disposal or recycling information, please

contact your local authorities or visit

www.recycle.philips.com.

This product contains batteries:

• Dispose of batteries properly. Do not

incinerate. Batteries may explode if

overheated.

• Do not wrap in metal or aluminum foil.

Wrap in newspaper before discarding.

• It is suggested that you contact your local

town or city to determine proper battery

redemption site(s) in your area.

• Please visit www.call2recycle.org for

additional information on a recycling center

in your area for rechargeable batteries.

2 Your SoundBar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your

SoundBar at www.philips.com/welcome.

Main unit

This section includes an overview of the main

unit.

a (Standby-On/Standby indicator)

• Switch the SoundBar on or to standby.

• When the SoundBar is in standby, the

standby indicator turns red.

b SOURCE

Select an input source for the SoundBar.

c Display panel

d +/- (Volume)

Increase or decrease volume.

Remote control

This section includes an overview of the

remote control.

da b c

5EN

a (Standby-On)

Switch the SoundBar on or to standby.

b Source buttons

HDMI ARC: Switch your source to HDMI

ARC connection.

: Switch to Bluetooth mode.

USB: Switch to USB mode.

OPTICAL: Switch your audio source to

the optical connection.

COAX: Switch your audio source to the

coaxial connection.

AUDIO IN: Switch your audio source to

the MP3 connection (3.5mm jack).

AUX: Switch your audio source to the

AUX connection.

c / (Previous/Next)

Skip to the previous or next track in USB

mode.

e l

d (Play/Pause)

• Start, pause or resume play in USB

mode.

e BASS +/-

Increase or decrease bass.

f Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

g SOUND

Select a sound mode.

h SURROUND ON/OFF

Select surround or stereo sound.

i AUDIO SYNC +/-

Increase or decrease audio delay.

j DIM

Set the brightness of SoundBar display

panel.

k NIGHT

Turn night mode on or off.

l TREBLE +/-

Increase or decrease treble.

Connectors

This section includes an overview of the

connectors available on your SoundBar.

bde

6EN

a DIGITAL IN-COAXIAL

Connect to a coaxial audio output on the

TV or a digital device.

b AUX IN (L/R)

Connect to an analog audio output on the

TV or an analog device.

c DIGITAL IN-OPTICAL

Connect to an optical audio output on the

TV or a digital device.

d DC IN

Connect to the power supply.

e HDMI OUT (ARC) - TO TV

Connect to the HDMI input on the TV.

f SUBWOOFER

Connect to the supplied subwoofer.

g (USB)

• Audio input from a USB storage

device.

• Upgrade software of this product.

• Charge a USB device.

h AUDIO IN

• Audio input from, for example, an MP3

player (3.5mm jack).

3 Connect and set

This section helps you connect your SoundBar

to a TV and other devices, and then set it up.

For information about the basic connections of

your SoundBar and accessories, see the quick

start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Placement

Place the subwoofer at least 1 meter (3 feet)

away from your SoundBar, and ten centimeters

away from the wall.

For best results, place your subwoofer as shown

below.

7EN

Connect to TV

Connect your SoundBar to aTV.You can listen

to audio from TV programs through your

SoundBar. Use the best quality connection

available on your SoundBar andTV.

Connect to TV through HDMI (ARC)

Your SoundBar supports HDMI with Audio

Return Channel (ARC). If yourTV is HDMI ARC

compliant, you can hear the TV audio through

your SoundBar by using a single HDMI cable.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC)-TO TV connector

on your SoundBar to the HDMI ARC

connector on the TV.

• The HDMI ARC connector on the TV

might be labeled differently. For details,

see the TV user manual.

2 On yourTV, turn on HDMI-CEC

operations. For details, see the TV user

manual.

Note

• If yourTV is not HDMI ARC compliant, connect

an audio cable to hear theTV audio through your

SoundBar (see 'Connect audio from TV and other

devices' on page 8).

• If yourTV has a DVI connector, you can use an HDMI/

DVI adapter to connect to TV. However, some of the

features may not be available.

Connect audio from TV and

other devices

Play audio fromTV or other devices through

your Soundbar speakers.

Use the best quality connection available on

yourTV, Soundbar, and other devices.

Note

• When your Soundbar andTV are connected through

HDMI ARC, an audio connection is not required. (see

'Connect to TV through HDMI (ARC)' on page 7)

Option 1: Connect audio through a

digital optical cable

Best quality audio

1 Using an optical cable, connect the

OPTICAL connector on your SoundBar to

the OPTICAL OUT connector on the TV

or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

8EN

Option 2: Connect audio through a

digital coaxial cable

Good quality audio

1 Using a coaxial cable, connect the

COAXIAL connector on your SoundBar

to the COAXIAL/DIGITAL OUT

connector on the TV or other device.

• The digital coaxial connector might be

labeled DIGITAL AUDIO OUT.

Option 3: Connect audio through

analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your SoundBar to the

AUDIO OUT connectors on the TV or

other device.

DVD

4 Use your

SoundBar

This section helps you use the SoundBar to play

audio from connected devices.

Before you start

• Make the necessary connections described

in the quick start guide and the user

manual.

• Switch the SoundBar to the correct source

for other devices.

Adjust the volume

1 Press +/- (Volume) to increase or decrease

a volume level.

• To mute sound, press (Mute).

• To restore the sound, press (Mute)

again or press +/- (Volume).

Choose your sound

This section helps you choose the ideal sound

for your video or music.

Sound mode

Select predened sound modes to suit your

video or music.

1 Press SOUND to select a sound option

from the display panel.

• AUTO: Automatically select a sound

setting based on the sound stream.

• POWERFUL: Enjoy thrilling arcade

sounds, ideal for action-packed videos

and loud parties.

• BALANCED: Experience the original

sound of your movies and music,

without added sound effects.

9EN

• BRIGHT: Spice up your dull movies

and music with added sound effects.

• CLEAR: Hear every detail in your

music and clear voices in your movies.

• WARM: Experience spoken words and

music vocals in comfort.

• PERSONAL: Personalize the sound

based on your preferences.

Surround sound mode

Experience an immersive audio experience with

surround sound modes.

1 Press SURROUND ON/OFF to turn

surround mode on or off.

• On: Create a surround listening

experience.

• Off:Two-channel stereo sound. Ideal

for listening to music.

Equalizer

Change the high frequency (treble) and low

frequency (bass) settings of the SoundBar.

1 Press TREBLE +/- or BASS +/- to change

the frequency.

Synchronize video and sound

If the audio and video are not synchronized,

delay the audio to match the video.

1 Press AUDIO SYNC +/- to synchronize

the audio with the video.

Night mode

For quiet listening, night mode decreases the

volume of loud sounds when audio is played.

Night mode is only available for Dolby Digital

soundtracks.

1 Press NIGHT to turn night mode on or

off.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with

your Bluetooth device (such as an iPad, iPhone,

iPod touch, Android phone, or laptop), and then

you can listen to the audio les stored on the

device through your SoundBar speakers.

What you need

• A Bluetooth device which supports

Bluetooth prole A2DP, AVRCP and with

Bluetooth version as 3.0 + EDR.

• The maximum operational range between

the SoundBar and a Bluetooth device is

approximately 10 meters (30 feet).

1 Press on the remote control to switch

the SoundBar to Bluetooth mode.

» BT is displayed on the display panel,

blinking.

2 On the Bluetooth device, switch on

Bluetooth, search for and select PHILIPS

HTL2161B to start connection (see the

user manual of the Bluetooth device on

how to enable Bluetooth).

» During connection, BT on the display

panel blinks.

3 Wait until you hear a beep sound from the

SoundBar.

» When the Bluetooth connection

succeeds, BT is displayed on the display

panel.

» If the connection fails, BT on the

display panel blinks continuously.

4 Select and play audio les or music on

your Bluetooth device.

• During play, if a call is coming, music

play is paused. Play resumes when the

call ends.

• If your Bluetooth device supports

AVRCP prole, on the remote control

you can press / to skip to a track,

or press to pause/resume play.

10 EN

5 To exit Bluetooth, select other source.

• When your switch back to Bluetooth

mode, Bluetooth connection remains

active.

Note

• The music streaming may be interrupted by obstacles

between the device and SoundBar, such as wall, metallic

casing that covers the device, or other devices nearby

that operate in the same frequency.

• If you want to connect your SoundBar with another

Bluetooth device, press and hold on the remote

control to disconnect the currently connected

Bluetooth device.

MP3 player

Connect your MP3 player to play your audio

les or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable,

connect the MP3 player to the AUDIO IN

connector on your SoundBar.

2 Press AUDIO IN on the remote control.

3 Press the buttons on the MP3 player to

select and play audio les or music.

USB storage devices

Enjoy audio on a USB storage device, such as an

MP3 player and USB ash memory, etc.

What you need

• A USB storage device that is formatted for

FAT or NTFS le systems, and complies

with the Mass Storage Class.

• An MP3 le on a USB storage device

1 Connect a USB storage device to this

product.

2 Press USB on the remote control.

3 Use the remote control to control play.

Button Action

Start, pause or resume play.

/ Skip to the previous or next track.

USB During USB play, press repeatedly to

select a repeat or shufe mode, or

turn off a play mode.

Note

• This product may not be compatible with certain types

of USB storage device.

• If you use a USB extension cable, USB HUB, or USB

multi-reader, the USB storage device may not be

recognized.

• Digital camera PTP and MTP protocols are not

supported.

• Do not remove the USB storage device while it is

being read.

• DRM-protected music les (MP3) are not supported.

• Support a USB port: 5V , 1A.

Auto standby

When playing media from a connected device,

the SoundBar automatically switches to standby

after 29 minutes of button inactivity and no

audio/video play from a connected device.

Set display brightness

You can press DIM repeatedly to select a

different brightness level of the display panel on

this product.

11EN

Apply factory settings

You can reset this product to the default

settings programmed at the factory.

1 In any source mode, on the remote control

press Volume -, BASS -, and TREBLE - in

sequence within three seconds.

» When the factory settings restore is

complete, the product automatically

switches off and restarts.

5 Update software

To get the best features and support, update

your product with the latest software.

What you need

• Connect this product to yourTV through

HDMI.

Check software version

In HDMI ARC source, on the remote control

press TREBLE -, BASS -, and Volume - in

sequence.

Update software via USB

1 Check the latest software version on

www.philips.com/support.

• Search for your model and click on

"Software and drivers".

2 Download the software into a USB storage

device.

a Unzip the download if zipped, and

makesurethattheunzippedleis

named "HTL2161.bin".

b Putthe"HTL2161.bin"leintheroot

directory.

3 Connect the USB storage device to the

(USB) connector on this product.

4 Switch this product to the HDMI ARC

source, and switch yourTV to the HDMI

source.

Inhaltsverzeichnis

Andere Philips Sprecher Handbücher

Philips

Philips AD6000W/10 Bedienungsanleitung

Philips

Philips HTL1170B Leitfaden

Philips

Philips SPA2210 Bedienungsanleitung

Philips

Philips BT6000 Bedienungsanleitung

Philips

Philips CSS2113/12 Bedienungsanleitung

Philips

Philips CSP550 Bedienungsanleitung

Philips

Philips AD6000W/10 Bedienungsanleitung

Philips

Philips MMS321/05 Bedienungsanleitung

Philips

Philips SPA7210R/10 Bedienungsanleitung

Philips

Philips HU2000 Series Bedienungsanleitung

Philips

Philips FB698/00B Bedienungsanleitung

Philips

Philips SBCBA100/00 Bedienungsanleitung

Philips

Philips SPA6270BT Bedienungsanleitung

Philips

Philips AW5000 Bedienungsanleitung

Philips

Philips SHOQBOX SB7100 Bedienungsanleitung

Philips

Philips BLAST BT Bedienungsanleitung

Philips

Philips HTL2101/F7 Bedienungsanleitung

Philips

Philips SB7100/12 Bedienungsanleitung

Philips

Philips SB7200/12 Bedienungsanleitung

Philips

Philips HTL2101/F7 Bedienungsanleitung

Philips

Philips SBC BP015 Bedienungsanleitung

Philips

Philips SPA8150B Bedienungsanleitung

Philips

Philips HTL6140B Bedienungsanleitung

Philips

Philips Fidelio AD7000W Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung