Philips 32PFL5007/V7 Bedienungsanleitung

24PFL5007/V7

32PFL5007/V7

Contents

EN 1

1 Notice 2

2 Important 3

Equipment connection

4.1 Name and Function of Control

3 Antenna and External

on Set 7

7 17

Product information

Supported display resolutions

USB

Tuner/Reception/Transmission

Remote control

Power

Supported TV mounts

Product Specification

4.2 Name and Function of Control

on Remote 8

4.3 Battery Installation 11

5.2

5.3 Sound Menu

5.4 Features Menu 12

5.5 Installation Menu 15

6 Troubleshooting 16

4 Use your TV

Picture Menu 12

Use more of your TV5

Access TV menus 11

5.1

2 EN

1 Notice

Pixel characteristics

This LCD/LED product has a high number of

colour pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen. This is a structural property of

the display (within common industry standards)

and is not a malfunction.

Warranty

No components are user serviceable. Do not

open or remove covers to the inside of the

product. Repairs may only be done by Philips

Service Centres and official repair shops. Failure

to do so shall void any warranty, stated or

implied.

Any operation expressly prohibited in

this manual, any adjustments, or assembly

procedures not recommended or authorised in

this manual, shall void the warranty.

EN 3

2 Important

Read and understand all instructions before you

use your TV. If damage is caused by failure to

follow instructions, the warranty does not apply.

Safety

Risk of electric shock or fire !

Never expose the TV to rain or water.

Never place liquid containers, such as

vases, near the TV. If liquids are spilt on

or into the TV, disconnect the TV from

the power outlet immediately. Contact

Philips Consumer Care to have the TV

checked before use.

Never place the TV, remote control or. batteries near naked flames or other heat

sources, including direct sunlight.

To prevent the spread of fire, keep

candles or other flames away from the

TV, remote control and batteries at all

times.

Never insert objects into the ventilation

slots or other openings on the TV.

When the TV is swiveled ensure that

no strain is exerted on the power cord.

Strain on the power cord can loosen

connections and cause arcing.

Never expose the remote control or

batteries to rain, water or excessive heat.

Avoid force coming on to power plugs.

Loose power plugs can cause arcing or

Risk of injury or damage to the TV !

Two people are required to lift and carry

a TV that weights more than 25 kg.

fire.

Risk of electric shock or fire !

When stand mounting the TV, use only

the supplied stand. Secure the stand to

the TV tightly. Place the TV on a , level

surface that can support the combined

weight of the TV and the stand.

When wall mounting the TV, use only a

wall mount that can support the weight of

the TV. Secure the wall mount to a wall

that can support the combined weight of the

TV and wall mount.PE Electronics Ltd. bears

that result in accident, injury or damage.

Risk of injury to children!

Follow these precautions to prevent the

TV from toppling over and causing injury to

children:

Never place the TV on a surface covered

by a cloth or other material that can be

pulled away.

Ensure that no part of the TV hangs over

the edge of the surface.

Never place the TV on tall furniture (such

as a bookcase) without anchoring both

the furniture and TV to the wall or a

suitable support.

Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of overheating!

Never install the TV in a space.

Always leave a space of at least 4 inches

or 10 cm around the TV for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the TV.

Risk of damage to the TV!

Before you connect the TV to the power

outlet, ensure that the power voltage

matches the value printed on the back

of the TV. Never connect the TV to the

power outlet if the voltage is different.

Risk of injury, or power cord damage!

Never place the TV or any objects on the

power cord.

To disconnect the TV power cord easily

from the power outlet, ensure that you

have full access to the power cord at all

times.

flat

confined

fire

no responsibility for improper wall mounting

4 EN

Disposal of your old product and

batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When you disconnect the power cord,

always pull the plug, never the cable.

Disconnect the TV from the power

outlet and antenna before lightning

storms. During lightning storms, never

touch any part of the TV, power cord or

antenna cable.

Risk of hearing damage!

Avoid using earphones or headphones at

high volumes or for prolonged periods of

time.

Low temperatures

If the TV is transported in temperatures

below 5

until the TV temperature matches room

temperature before connecting the TV to

the power outlet.

Screen care

Avoid stationary images as much as

possible. Stationary images are images

that remain on-screen for extended

periods of time. Examples include:

on-screen menus, black bars and time

displays. If you must use stationary

images, reduce screen contrast and

brightness to avoid screen damage.

Unplug the TV before cleaning.

Clean the TV and frame with a soft,

damp cloth. Never use substances such as

alcohol, chemicals or household cleaners

on the TV.

Risk of damage to the TV screen! Never

touch, push, rub or strike the screen with

any object.

To avoid deformations and colour fading,

wipe off water drops as soon as possible.

C, unpack the TV and wait

L1 YPbPr1

AV1 Av1R1

ANT IN

1. The aerial cable should not be bundled to the power cord.

COMPONENT (YCbCr/YPbPr) DVD INPUT

1. Connect the component outputs (YCbCr / YPbPr) of

DVD player to the component (YPbPr) input of the

the TV.

2. Connect audio outputs (L,R) of a DVD player to the

audio input (YPbPr) respectively.

3. Press the PLAY button on the DVD player.

VIDEO INPUT

1. Connect the component outputs VIDEO out

of VCR/Cable receiver to AV1, AV2.

2. Connect audio outputs (L, R) of a DVD player to the

audio input AV1, AV2 respectively.

3. Press the PLAY button on the VCR.

Note : Selecting a Source

Press SOURCE key on remote or on front panel keypad.

Press TV key on the remote to enter into TV source from any other source,

3 Antenna and External Equipment Connection

A source OSD will appear. Press Up/Down key on the remote or CH+ /CH- on

or VOL’+' key from front panel to enter selected source or press SOURCE key

repeatedly to change and select source.

front panel can be used to select source. Press OK/Right key on the remote

except USB source.

ent such as VCR,DVD player

EN 5

AV OUT

6 EN

HDMI

3. Switch on the PC and PC screen appears on the set.

The set can be operated as PC monitor.

HDMI socket (HDMI1,HDMI2,HDMI3) on the TV.

USB

Connect / Insert standard USB and select USB

source on source OSD by pressing SOURCE key.

Press OK / Right key on remote, connected USB is

Listed, press OK to enter in selected USB .

Similarly front panel keys CH+/- and VOL+ can be

operated as Up/Down and OK/Right keys on remote

respectively.

HDMI

USB

NOTE :

1) CH+/CH- keys on remote are represented by - CH + on TV set.

VOL+/VOL- keys on remote are represented by on TV set.

Note :

1) Above Sketches are just representation. Actual TV set may look differ than these sketches.

1) LED INDICATOR

2) IR SENSOR

3) STAND BY

4) SOURCE (TV/AV)

5) MENU

6) CH-

7) CH+

8) VOL-

9) VOL+

10) AC POWER IN

11) USB

12) HDMI

13) VGA AUDIO IN

14) VGA IN

15) Y Pb Pr

16) L1 (YPbPr/AV)

17) R1 (YPbPr/AV)

A) Front Panel Control/Keys (Optional)

EN 7

4.1 Name and Function of Control on Set

18) V1

19) AV2 IN

20) AV OUT

21) RF

: Switch Channels.

: Adjust Volume.

: Access the home menu.

: Source Selection and Submenu entry.

: Switch the TV on or off.

: standby indicator and remote

sensor.controller

4 Use your TV

NOTE : This is for representation actual remote may differ.

8 EN

4.2 Name and Function of Control on Remote

INCR.SURR TELETEXT SOURCE

SCENEA DUAL I/II SLEEPDEMO

FREEZE EXIT

A/CH INFO

USB

FORMAT

21 3

54 6

87 9

SOUND PICTURE

BACK

POWER

Turns TV into STANDBY ON / OFF mode.

INFO

1) Displays present source information with details of input signal connected.

MUTE

Turns sound OFF or ON.

SOURCE

SLEEP

Sets sleep timer. Maximum time can be set 240 minutes in steps of

10,20,30,60 90,120,180,240 minutes.

NOTE :

Sleep Timer is deactivated when set is switch to stand by or mains power supply is switched Off.

PICTURE

Recalls presetted picture settings can be selected.

SOUND

Recalls presetted sound settings can be selected.

DIRECT DIGIT NUMBER SELECTION Keys ( 0 to 9 )

Selects program number 1 - 200 directly by using direct digit keys.

- To select 1 digit program number press desired program number & wait for few

seconds selected program number will appears on screen

- To select 2 digit or 3 digit program number press 1st, 2nd, or 3rd digit within

2 sec. after pressing 1 & 2 digit respectively.

- To enter password to lock or unlock channel and to set New Password.

INFO MUTE

SOURCE SLEEP

PICTURE SOUND

BACK (A/CH)

Toggles between current & last viewed channel. In USB mode use this

FORMAT

Selects a picture format. (Not Applicable in USB)

CH + / CH –

Navigate Up / Down through the valid channel.

To increase / decrease the volume

Navigates vertically up/down through the Menu/Sub menu.

- Used to set Program name.

- Used to sorting purpose in Program edit menu.

- To enter into displayed Menu / Sub menu parameters.

- Select submenu from displayed menu.

- Increase / Decrease the value of selected items

- Select characters in program name and time in time menu.

- Adjust setting of selected item and set feature to ON/OFF.

- Adjust Channel number in tuning.

- In USB mode key to enter folder key to exit from folder

OK - Used to enter selected MENU items (Optional)

(MENU)

To Select menu OSD window and to exist from menu OSD window when menu

window is displayed on screen.

Press SOURCE key on remote or key on front panel keypad.

A source OSD will appear to select a source press OK/Right key on the remote or

VOL '+' key from front panel. Press source key repeatedly to change and select source.

Up/Down key on the remote or CH+/- on front panel can be used to changed sources.

3) Energy meter will be displayed by pressing this key.(Not applicable for USB mode.)

2) In USB mode this key is use to display elasped or remaining time for audio &

(PERSONAL, CINEMA, SPORTS,VIVID,BRIGHT)

(PERSONAL, MUSIC, STANDARD,NEWS))

0-9

A/CH

FORMAT

+ / –

EN 9

to display info bar for images

key to exit from images, thumbnail mode and come back to previous folder.

- Select Up/Down Text page in USB mode.

- Select Prev/Next text file in USB mode.

- To go to channel edit when menu is not on screen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Fernseher Handbücher

Philips

Philips 42FD9934 Bedienungsanleitung

Philips

Philips 8536 Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips 65PUS7601 Bedienungsanleitung

Philips

Philips TE3.1E CA Bedienungsanleitung

Philips

Philips 25PS40S Bedienungsanleitung

Philips

Philips 55PML9507 Bedienungsanleitung

Philips

Philips matchline 32PW9723 Bedienungsanleitung

Philips

Philips 42PFL3403/98 Bedienungsanleitung

Philips

Philips 21PT1820/12 Bedienungsanleitung

Philips

Philips OLED806 Series Bedienungsanleitung

Philips

Philips Magnavox TS3259C1 Bedienungsanleitung

Philips

Philips 29PT3223/69 Bedienungsanleitung

Philips

Philips 32PFL3403D/85 Bedienungsanleitung

Philips

Philips 50PFL5907/F7 Bedienungsanleitung

Philips

Philips 28PW9631 Bedienungsanleitung

Philips

Philips 24CE3271 Bedienungsanleitung

Philips

Philips 43PUS8105 Bedienungsanleitung

Philips

Philips 25PS50S Bedienungsanleitung

Philips

Philips 32 IN HDTV MONITOR WITH ACTIVE CONTROL 32PT830H... Bedienungsanleitung

Philips

Philips 20HF5335D Bedienungsanleitung

Philips

Philips 27-REAL FLAT SDTV 27PT9015D - Hook Up Guide Bedienungsanleitung

Philips

Philips Magnavox MX3690B Bedienungsanleitung

Philips

Philips 29PT9047 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Sylvania

Sylvania 6427FB Bedienungsanleitung

Sanyo

Sanyo CE19LD90N-B Bedienungsanleitung

North State

North State TV2GO Bedienungsanleitung

RCA

RCA RTU7877 Bedienungsanleitung

Sharp

Sharp 21K-FG1RU Bedienungsanleitung

Sony

Sony Esprit TAV-L1 Bedienungsanleitung

Grundig

Grundig 43 VLE 4820 Bedienungsanleitung

Samsung

Samsung LN26C350D1D Bedienungsanleitung