Philips E Series Bedienungsanleitung

www.philips.com/welcome

E line

321E1/322E1/

325E1/328E1

EN User manual 1

Customer care and warranty 28

Troubleshooting & FAQs 32

Table of Contents

1. Important ....................................... 1

1.1 Safety precautions and

maintenance .................................. 1

1.2 Notational Descriptions ............. 3

1.3 Disposal of product and packing

material........................................... 3

2. Setting up the monitor............... 5

2.1 Installation ..................................... 5

2.2 Operating the monitor................ 9

2.3 Remove the Base Assembly for

VESA Mounting .......................... 13

3. Image Optimization................... 15

3.1 SmartImage .................................. 15

3.2 SmartContrast.............................. 17

4. Adaptive Sync ............................. 18

5. Technical Specications ...........19

5.1 Resolution & Preset Modes .... 25

6. Power Management ................. 27

7. Customer care and warranty .. 28

7.1 Philips’ Flat Panel Monitors

Pixel Defect Policy.....................28

7.2 Customer Care & Warranty ....... 31

8. Troubleshooting & FAQs.......... 32

8.1 Troubleshooting......................... 32

8.2 General FAQs..............................34

1. Important

This electronic user’s guide is intended

for anyone who uses the Philips

monitor. Take time to read this user's

manual before you use your monitor.

It contains important information and

notes regarding the operation of your

monitor.

The Philips guarantee applies provided

the product is handled properly for

its intended use, in accordance with

its operating instructions and upon

presentation of the original invoice

or cash receipt, indicating the date of

purchase, dealer’s name and model and

production number of the product.

1.1 Safety precautions and

maintenance

Warnings

Use of controls, adjustments or

procedures other than those specified

in this documentation may result in

exposure to shock, electrical hazards

and/or mechanical hazards.

Read and follow these instructions

when connecting and using your

computer monitor.

Operation

• Please Keep the monitor out of

direct sunlight, very strong bright

lights and away from any other heat

source. Lengthy exposure to this

type of environment may result in

discoloration and damage to the

monitor.

• Remove any object that could fall

into ventilation holes or prevent

proper cooling of the monitor’s

electronics.

• Do not block the ventilation holes

on the cabinet.

• When positioning the monitor, make

sure the power plug and outlet are

easily accessible.

• If turning off the monitor by

detaching the power cable or DC

power cord, wait for 6 seconds

before attaching the power cable or

DC power cord for normal operation.

• Please use approved power cord

provided by Philips all the time. If

your power cord is missing, please

contact with your local service

center. (Please refer to Service

contact information listed in

Important information manual.)

• Operate under the specified power

supply. Be sure to operate the

monitor only with the specified

power supply. Use of an incorrect

voltage will cause malfunction and

may cause fire or electric shock.

• Protect the cable. Do not pull or

bend the power cable and signal

cable. Do not place the monitor

or any other heavy objects on the

cables, if damaged, the cables may

cause fire or electric shock.

• Do not subject the monitor to severe

vibration or high impact conditions

during operation.

• Do not knock or drop the monitor

during operation or transportation.

• Excessive usage of monitor can

cause eye discomfort, it’s better to

take shorter breaks more often at

your workstation than longer breaks

and less often; for example a 5-10

minute break after 50-60-minute

continuous screen use is likely to

be better than a 15-minute break

every two hours. Try to keep your

eyes from eye strain while using the

screen for a constant period of time

by :

1. Important

• Looking at something varying

distances after a long period

focusing on the screen.

• Conscious Blinking often while

you work.

• Gently closing and rolling your

eyes to relax.

• Reposition your screen to ap-

propriate height and angle ac-

cording to your height.

• Adjusting the brightness and

contrast to appropriate level.

• Adjusting the environment light-

ing similar to that of your screen

brightness, avoid the uorescent

lighting, and surfaces that don’t

reect too much light.

• Seeing a doctor if your symp-

toms.

Maintenance

• To protect your monitor from pos-

sible damage, do not put excessive

pressure on the LCD panel. When

moving your monitor, grasp the

frame to lift; do not lift the monitor

by placing your hand or ngers on

the LCD panel.

• Unplug the monitor if you are not

going to use it for an extensive pe-

riod of time.

• Unplug the monitor if you need to

clean it with a slightly damp cloth.

The screen may be wiped with a

dry cloth when the power is o.

However, never use organic solvent,

such as, alcohol, or ammonia-based

liquids to clean your monitor.

• To avoid the risk of shock or perma-

nent damage to the set, do not ex-

pose the monitor to dust, rain, water,

or excessive moisture environment.

• If your monitor gets wet, wipe it with

dry cloth as soon as possible.

• If foreign substance or water gets in

your monitor, please turn the power

o immediately and disconnect the

power cord. Then, remove the for-

eign substance or water, and send it

to the maintenance center.

• Do not store or use the monitor in

locations exposed to heat, direct

sunlight or extreme cold.

• In order to maintain the best per-

formance of your monitor and use

it for a longer lifetime, please use

the monitor in a location that falls

within the following temperature

and humidity ranges.

• Temperature: 0-40°C 32-104°F

• Humidity: 20-80% RH

• IMPORTANT: Always activate a mov-

ing screen saver program when you

leave your monitor unattended.

Always activate a periodic screen

refresh application if your monitor

will display unchanging static con-

tent. Uninterrupted display of still

or static images over an extended

period may cause “burn in”, also

known as “after-imaging” or “ghost

imaging”, on your screen.

• "Burn-in", "after-imaging", or "ghost

imaging" is a well-known phenom-

enon in LCD panel technology.

In most cases, the “burned in” or

“after-imaging” or “ghost imag-

ing” will disappear gradually over a

period of time after the power has

been switched o.

Warning

Failure to activate a screen saver, or

a periodic screen refresh application

may result in severe “burn-in” or “after-

image” or “ghost image” symptoms

that will not disappear and cannot be

repaired. The damage mentioned above

is not covered under your warranty.

1. Important

Service

• The casing cover should be opened

only by qualied service personnel.

• If there is any need for any docu-

ment for repair or integration,

please contact with your local ser-

vice center. (please refer to Service

contact information listed in Impor-

tant information manual.)

• For transportation information,

please refer to "Technical Specica-

tions".

• Do not leave your monitor in a car/

trunk under direct sun light.

Note

Consult a service technician if the

monitor does not operate normally, or

you are not sure what procedure to take

when the operating instructions given in

this manual have been followed.

1.2 Notational Descriptions

The following subsections describe

notational conventions used in this

document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text

may be accompanied by an icon and

printed in bold or italic type. These

blocks contain notes, cautions or

warnings. They are used as follows:

Note

This icon indicates important

information and tips that help you make

better use of your computer system.

Caution

This icon indicates information that

tells you how to avoid either potential

damage to hardware or loss of data.

Warning

This icon indicates the potential for

bodily harm and tells you how to avoid

the problem.

Some warnings may appear in alternate

formats and may not be accompanied

by an icon. In such cases, the specific

presentation of the warning is mandated

by the relevant regulatory authority.

1.3 Disposal of product and

packing material

Waste Electrical and Electronic

Equipment-WEEE

This marking on the product or on

its packaging illustrates that, under

European Directive 2012/19/EU

governing used electrical and electronic

appliances, this product may not be

disposed of with normal household

waste. You are responsible for disposal

of this equipment through a designated

waste electrical and electronic

equipment collection. To determine the

locations for dropping off such waste

electrical and electronic, contact your

local government office, the waste

disposal organization that serves your

household or the store at which you

purchased the product.

Your new monitor contains materials

that can be recycled and reused.

Specialized companies can recycle

your product to increase the amount of

reusable materials and to minimize the

amount to be disposed of.

1. Important

All redundant packing material has been

omitted. We have done our utmost to

make the packaging easily separable

into mono materials.

Please find out about the local

regulations on how to dispose of your

old monitor and packing from your sales

representative.

Taking back/Recycling Information for

Customers

Philips establishes technically and

economically viable objectives

to optimize the environmental

performance of the organization's

product, service and activities.

From the planning, design and

production stages, Philips emphasizes

the important of making products that

can easily be recycled. At Philips,

end-of-life management primarily

entails participation in national take-

back initiatives and recycling programs

whenever possible, preferably

in cooperation with competitors,

which recycle all materials (products

and related packaging material) in

accordance with all Environmental

Laws and taking back program with the

contractor company.

Your display is manufactured with high

quality materials and components

which can be recycled and reused.

To learn more about our recycling

program please visit

http://www.philips.com/a-w/about/

sustainability.html

2. Setting up the monitor

2. Setting up the

monitor

2.1 Installation

Package contents

321E1SC:

* VGA * HDMI

* CD

Power

This product has been manufactured by and is

sold under the responsibility of Top Victory

Investments Ltd., and Top Victory Investments

Ltd. is the warrantor in relation to this product.

Philips and the Philips Shield Emblem are

registered trademarks of Koninklijke Philips N.V.

and are used under license.

Contents:

Drivers

User’s Manual

www.philips.com/welcome

使用产品前请阅读使用说明

保留备用

Monitor

E line

321E1

www.philips.com/welcome

Quick

Start

322E1C/325E1C:

* CD

Power

* DP * HDMI * VGA

This product has been manufactured by and is

sold under the responsibility of Top Victory

Investments Ltd., and Top Victory Investments

Ltd. is the warrantor in relation to this product.

Philips and the Philips Shield Emblem are

registered trademarks of Koninklijke Philips N.V.

and are used under license.

Contents:

Drivers

User’s Manual

www.philips.com/welcome

使用产品前请阅读使用说明

保留备用

Monitor

E line

www.philips.com/welcome

Quick

Start

328E1C:

* CD

Power

* DP * Audio

* HDMI

This product has been manufactured by and is

sold under the responsibility of Top Victory

Investments Ltd., and Top Victory Investments

Ltd. is the warrantor in relation to this product.

Philips and the Philips Shield Emblem are

registered trademarks of Koninklijke Philips N.V.

and are used under license.

Contents:

Drivers

User’s Manual

www.philips.com/welcome

使用产品前请阅读使用说明

保留备用

Monitor

E line

328E1

www.philips.com/welcome

Quick

Start

* Different according to region.

2. Setting up the monitor

Install base stand

321E1SC

1. In order to well protect this monitor

and avoid scratching or damaging of

the monitor, keep the monitor face

down in the cushion for the base

installation.

2. Hold the base stand with both

hands and firmly insert the base

stand into the base column.

(1) Gently attach the base to the base

column until the latch locks the

base.

(2) Use your fingers to tighten the

screw located at the bottom of

the base, and secure the base to

the column tightly.

(3) Use screwdriver to tighten the

screw located at the bottom of

the base, and secure the base to

the column tightly.

3. After attaching the base, erect the

monitor with both hands on holding

the monitor together with styrofoam

firmly. Now you can pull out the

styrofoam. Notice this monitor is

curved design, when you pull out

the styrofoam, do not squeeze the

panel to avoid broken panel.

322E1C/325E1C/328E1C

1. In order to well protect this monitor

and avoid scratching or damaging of

the monitor, keep the monitor face

down in the cushion for the base

installation.

2. Hold the base stand with both

hands and firmly insert the base

stand into the base column.

(1) Gently attach the base to the base

column until the latch locks the

base.

(2) Use screwdriver to tighten the

screw located at the bottom of

the base, and secure the base to

the column tightly.

3. After attaching the base, erect the

monitor with both hands on holding

the monitor together with styrofoam

firmly. Now you can pull out the

styrofoam. Notice this monitor is

2. Setting up the monitor

curved design, when you pull out

the styrofoam, do not squeeze the

panel to avoid broken panel.

Warning:

This product is curve design, when

attach / detach the base, place the

protective material under the monitor

and do not press down the monitor to

avoid the damage.

Connecting to your PC

321E1SC

AC power input

HDMI input

VGA input

HDMI audio out

Kensington anti-theft lock

322E1C

3 5

AC power input

DisplayPort input

HDMI input

VGA input

Audio out

6Kensington anti-theft lock

2. Setting up the monitor

325E1C

AC power input

HDMI input

DisplayPort input

VGA input

Audio out

6Kensington anti-theft lock

328E1C

AC power input

HDMI 1 input

HDMI 2 input

DisplayPort input

Audio input

6Earphone jack

7Kensington anti-theft lock

Connect to PC

1. Connect the power cord to the back

of the monitor firmly.

2. Turn off your computer and unplug

its power cable.

3. Connect the monitor signal cable to

the video connector on the back of

your computer.

4. Plug the power cord of your

computer and your monitor into a

nearby outlet.

5. Turn on your computer and monitor.

If the monitor displays an image,

installation is complete.

Andere Handbücher für E Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Fernseher Handbücher

Philips

Philips 27PS60S Bedienungsanleitung

Philips

Philips 14AA3527-01B Bedienungsanleitung

Philips

Philips 43PUD6701/30 Bedienungsanleitung

Philips

Philips 14PT6107/58N Bedienungsanleitung

Philips

Philips 32PFK4509/88 Bedienungsanleitung

Philips

Philips 52PFL7762D - annexe 1 Bedienungsanleitung

Philips

Philips 55PP9401 Bedienungsanleitung

Philips

Philips 4131 series Bedienungsanleitung

Philips

Philips 21PT2327/V7 Bedienungsanleitung

Philips

Philips 32 IN HDTV MONITOR WITH ACTIVE CONTROL 32PT830H... Bedienungsanleitung

Philips

Philips 15GR2636 Bedienungsanleitung

Philips

Philips 29PT3543 Bedienungsanleitung

Philips

Philips Anubis A Bedienungsanleitung

Philips

Philips 29PT5431/44R Bedienungsanleitung

Philips

Philips 21PT1653 Bedienungsanleitung

Philips

Philips 32PT553S99 Handbuch

Philips

Philips 43PUS6412/05 Bedienungsanleitung

Philips

Philips 28PT5008/01 Bedienungsanleitung

Philips

Philips 7 Series Bedienungsanleitung

Philips

Philips Magnavox PR1392XI Bedienungsanleitung

Philips

Philips 8808 Series Bedienungsanleitung

Philips

Philips L01.1E Bedienungsanleitung

Philips

Philips 32PFL5605/98 Bedienungsanleitung

Philips

Philips 21GR2356 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Sylvania

Sylvania 6427FB Bedienungsanleitung

Sanyo

Sanyo CE19LD90N-B Bedienungsanleitung

North State

North State TV2GO Bedienungsanleitung

RCA

RCA RTU7877 Bedienungsanleitung

Sharp

Sharp 21K-FG1RU Bedienungsanleitung

Sony

Sony Esprit TAV-L1 Bedienungsanleitung

Grundig

Grundig 43 VLE 4820 Bedienungsanleitung

Samsung

Samsung LN26C350D1D Bedienungsanleitung