Phocos 321666 Bedienungsanleitung
1
ECO-N-T
User Manual
www.phocos.com
2
Contents
Product Overview .............................................................................
Operation Notes ................................................................................
Warnings & Safety Instructions ......................................................
Display Functions .............................................................................
Installation Instructions ...................................................................
Tech Data ...........................................................................................
Safety Features & SOA .....................................................................
Error Codes ........................................................................................
4
4
5
6
8
9
10
11
Contenido
Descripción del Producto ...............................................................
Notas de Funcionamiento ...............................................................
Advertencias y Instrucciones de Seguridad .................................
Funciones de Visualación ...............................................................
Instrucciones de Instalación ..........................................................
Datos Técnicos ................................................................................
Características de Seguridad .........................................................
Códigos de Error .............................................................................
12
12
13
14
16
17
18
19
3
Présentation du Produit ..............................................................
Notes sur le Fonctionnement ......................................................
Avertissements et Consignes de Sécurité .................................
Fonctions d’Afchage .................................................................
Instructions d’Installation ...........................................................
Données Techniques ...................................................................
Caractéristiques de Sécurité .......................................................
Codes d’Erreur .............................................................................
20
21
21
22
24
25
26
27
Contenu
4
Product Overview
Description
The charge controller protects the battery from being overcharged
by the solar energy as well as from being overused by the loads.
The charging characteristics include several stages which include
automatic adaptation to the ambient temperatures.
System Voltage
This product is intended for use at 12 V and 24 V system voltage.
Battery Type
The ECO-N-T is suitable for use with lead acid batteries (vented,
GEL, or AGM type).
Low Voltage Disconnect Function
To prevent the battery against over-discharge this function
automatically switches off the load output at a battery voltage lower
than 11.0 V (12 V systems) or 22.0 V (24 V systems). As soon as
the battery reaches a voltage of 12.8 V (12 V systems) or 25.6 V
(24 V systems), the load output is switched on again.
Regulatory Information
Operation Notes
Warning: Indicates high voltage. Use caution when
performing task.
Caution: Indicates a critical procedure for safe operation.
Note: Indicates important information for safe and easy
installation and operation.
5
Warnings & Safety Instructions
Please read the instructions and warnings in this manual before
beginning installation.
Please do not disassemble or attempt to repair Phocos products.
Phocos charge controllers do not contain user serviceable parts.
High Voltage Risks
Operation of this device may produce a high voltage which could
cause severe injuries or death in case of improper installation or
operation of this device.
Do not touch any electrical conductors to avoid electrical shock.
Never work on live (energized) electrical equipment.
When working around a battery, do not allow tools to bridge the
battery terminals or short circuit any part of the battery.
Use only tools that have insulated handles.
PV modules can generate high DC voltages!
Mains and Charging Current Risks
Make sure the cables are always connected to the correct terminal.
An electrical shock can be lethal.
It is important the battery receives a full charge at least weekly. If
not, the battery will get permanently damaged. The battery cannot
receive a full charge if the loads are too large for the system.
6
Display Functions
The controller is equipped with 3 LEDs to display the operating
status.
In normal operation, the controller shows the charging status, the
battery SOC status and the load output status.
Charge Display
Controller connected to battery,
no sunlight over longer period
(Green LED on)
Charge LED
SOC LED
Load Status
LED
Controller connected to battery,
night detected
7
Battery SOC Display
Low (Yellow LED on)
Load Status Display
Low/high voltage disconnect
(Red LED on)
When the battery voltage is indicated as low, it is recommended to
use the remaining energy economically.
The charge controller will subsequently turn off the load.
In case of deep discharge or overload/short circuit of load, the load
output is switched off. This is indicated by:
Battery voltage > 12V
12V >Battery voltage > 11.5V
11.5V >Battery voltage > 11V
)
(
8
Installation Instructions
Before you Begin
The controller is intended for indoor use only.
Protect the controller from direct sunlight and place it in a dry
environment.
The controller and battery must be installed in the same room.
The controller warms up during operation; be sure it is installed on a
non-ammable surface.
Connect the Controller
Please verify that all the cable/wire connections are made properly
and well insulated so that no water or humidity can get in. This
avoids any bad or loose connections that would result in excessive
heating or further damage.
1. *Connect the battery to the charge controller; Positive
(+) & Negative (-).
2. Connect the solar modules to the charge controller;
Positive (+) & Negative (-).
3. Connect the load to the charge controller; Positive (+)
& Negative (-).
*Phocos strongly recommends installing an inline fuse as
close to the battery terminal as possible.
See illustrated steps on opposite page.
9
Tech Data
10
Safety Features
Reverse polarity
Short circuit (2)
Overcurrent
Reverse current
Overvoltage
Undervoltage
Overtemperature
PV terminals
Protected
Protected
-----
Protected
Max. 30 V
-----
Battery terminals
Warning: Red LED on
Protected (3)
-----
-----
Max. 30 V
-----
Safety Features
(1) Controller can protect itself, but any connected loads might be damaged.
(2) Short circuit: >4x - 6x nominal current
(3) Battery must be protected by a fuse, or it might be permanently damaged
in case of short circuit.
(4) >200% nominal current disconnect with 3s delay
ECO-N-T SOA (Safe Operating Area)
160
140
120
100
80
60
40
20
0 20 40 60 80 100 120 140 160
Nominal PV current / %
Nominal load current / %
25 °C
45 °C
55 °C
60 °C
Protected:
50V 31V Switches o above 15.5/31V
a high level.
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Sprachen:
Andere Phocos Controller Handbücher
Phocos
Phocos CMLmppt Bedienungsanleitung
Phocos
Phocos CX10 Bedienungsanleitung
Phocos
Phocos CIS Bedienungsanleitung
Phocos
Phocos CXNup 2B Bedienungsanleitung
Phocos
Phocos PL20 Bedienungsanleitung
Phocos
Phocos CXup Series Installationsanleitung
Phocos
Phocos ECO-N Bedienungsanleitung
Phocos
Phocos CIS05-2L Bedienungsanleitung
Phocos
Phocos CML05-2 Bedienungsanleitung
Phocos
Phocos ECO-N-T Bedienungsanleitung
Phocos
Phocos CIS Bedienungsanleitung
Phocos
Phocos CIS-MPPT 50/10 Bedienungsanleitung
Phocos
Phocos ECO-N-T Series Bedienungsanleitung
Phocos
Phocos CIS-N-MPPT 100/30 Bedienungsanleitung
Phocos
Phocos Any-Grid Series Betriebsanleitung
Phocos
Phocos MPPTsolid Bedienungsanleitung
Phocos
Phocos CIS-N-MPPT 100/30 Bedienungsanleitung
Phocos
Phocos CX20 Bedienungsanleitung
Phocos
Phocos CIS-MPPT-LED 85/15 Bedienungsanleitung
Phocos
Phocos ECO-N-T Bedienungsanleitung
