Phoenix Stackable CAM Pro Bedienungsanleitung

USEPHOENIX.COM

1.800.533.7533

The Phoenix Stackable CAM Pro offers all the great features of our proven CAM air movers, with the addition of an innovative

stackable cabinet design. Featuring multiple contact points and interlocking side grills, the Phoenix Stackable CAM Pro can be stored

safely and securely up to 4 units high, freeing up valuable space in your trucks and warehouses.

The Stackable CAM Pro features class-leading airﬂow and efﬁciency. Using a unique 1/3 horsepower motor design and proprietary

blower technology, the Phoenix Stackables achieve 1050 CFM at over 2800 FPM with high static pressure, while using only 2.6 amps

of electricity on high speed (2.0 amps on low). With it’s low amp draw and onboard GFCI, the Phoenix Stackable CAM Pro gives

you maximum airﬂow on a circuit, allowing up to 4 CAMs on a standard 15 amp household circuit on high speed (or up to 6 on low

speed). The Phoenix Stackable CAM housing is durable, washable, and chemical resistant. It features multiple operating positions

allowing it to be aimed horizontally, vertically, or at 45°. And, like all Phoenix air movers, the Stackable CAM Pro is ETL Listed, UL

Certiﬁed.

The Phoenix Stackable CAM Pro is also lightweight and properly balanced for easy handling. Other convenience features include a

lighted cord for easier determination of power to the outlet and superior cord management for better handling, packing, and storage.

The Phoenix Stackable Centrifugal Air Mover Pro

• 2-Speed 1/3 Horsepower Motor

2.6 Amps on High Speed

2.0 Amps on Low Speed

• Maximum Velocities 2800 FPM

• Balanced Exhaust Airﬂow

• Directional Airﬂow

Horizontal, 45° Angle, 90° Angle

• Durable, rugged, chemical resistant housing, fan wheel,

and controls design.

• Operator interface conveniently located for easy access,

featuring: power indicator lamp and large three-position

switch.

• Ergonomic carry handle and power cord storage.

• Non-marking, anti-skid, rubber feet.

• 4 CAMs on a circuit on high

• 6 CAMs on a circuit on low

• 20% more CFM/Amp than our current industry leading

CAM

• On-board duplex GFCI and circuit breaker

• Stacks up to 4 units high

TS-669

08/18 Rev. A

Phoenix Stackable Centrifugal Air Mover Pro

PN 4030990

*PN 4030980 is

pictured to demonstrate

stackability

Installation, Operation & Service Instructions

– READ AND SAVE THESE INSTRUCTIONS –

Speciﬁcations subject to change without notice.

4201 LIEN RD. • MADISON, WI 53704

Phoenix Stackable CAM Pro - Centrifugal Air Mover

OWNER’S MANUAL

WISCONSIN

USEPHOENIX.COM

1.800.533.7533

Table of Contents

Introduction ...............................................................................1

Centrifugal Air Mover Pro Features and Beneﬁts .................1

1. Safety Information .............................................................2

2. Speciﬁcations .....................................................................3

3. Power Requirements.........................................................3

3.1 Daisy-Chaining.............................................................3

3.2 Recommended Use ....................................................4

4. Operating Instructions.......................................................4

5. Operator Panel Features ...................................................4

5.1 12 Amp Circuit Breaker..............................................4

5.2 Power Indication Lamp ..............................................4

5.3 3-Position Drying Selector Switch.............................4

5.4 GFCI Protection............................................................5

6. How to Stack.......................................................................5

7. Maintenance.......................................................................5

7.1 Servicing .......................................................................5

7.2 Cleaning ........................................................................5

8. Replacement Parts and Optional Accessories ..............5

9. Wiring Diagram ..................................................................6

Warranty..............................................................................7

Serial No.__________________________________

Purchase Date_____________________________

Dealer’s Name_____________________________

Read the operation and maintenance instructions

carefully before using this unit. Proper adherence to these

instructions is essential to obtain maximum beneﬁt from

your Phoenix 4030990.

1 Safety Information

When using any rotational electrical device basic

precautions should always be followed, including the

following:

CAUTION! For general ventilating use only. Do not use in

environments containing hazardous or explosive materials

and vapors.

• Do not operate the unit without the safety guards

properly installed and secured. Do not operate the unit if

the guards become damaged. Contact Therma-Stor for

replacement parts.

• Always replace the guards as originally installed after

servicing or cleaning the product.

• Never place your face, hands, or other susceptible body

parts in the air stream, inlets, or outlet of this device.

• This fan is not a toy! Ensure children do not play with

and do not have access to the equipment. Do not allow

children to play with or stand near the unit or in its air

ﬂow.

• Do not use this fan with any solid-state speed control

device.

• Do not operate unit with a cut or frayed power cord.

Replace cord if it becomes damaged.

• Handle with care. Do not drop or throw the unit. The unit

can be damaged under harsh treatment.

• Do not unplug the unit by pulling on the cord. Grasp the

plug ﬁrmly and pull it out of the wall socket or power

receptacle.

• Always use a grounded outlet.

• Do not plug more than 9.3 amps total into the GFCI

outlet.

• Check GFCI protection before each use by pushing “test”

button. If operating properly, “reset” button will pop out.

• Never operate electrical equipment in standing water.

• Never operate with the safety grills removed. Personal

injury may result.

• Do not stick your ﬁngers or other objects through the

safety grills.

• Do not restrict airﬂow to the unit. This may cause the unit

to overheat.

• Unit should never be serviced or cleaned while it is

plugged in.

• Make sure the unit is secure, stable and safe from falling

over or falling down before operating.

• Do not sit or stand on the unit or use as a step.

• Do not leave device plugged in when not in use.

• Indoor use only. Do not expose to water or rain (store

indoors.)

• Use only as described in this manual.

USEPHOENIX.COM

1.800.533.7533

2 Speciﬁcations

Part No.

4030990

Power 115 VAC, 60 hz.

Operating 3 – 0°, 45°, 90°

Positions

Drive Motor 1 /3 Horsepower, 2-Speed

Motor Thermal cut-off

Protection

Cord Length 20 Feet

Airﬂow 2800 ft/min outlet velocity

Current Draw 2.6 Amps High speed, 2.0 Amps Low speed

Warranty One Year - 100% parts and labor

(all components)

Three Years - Only materials and workmanship

of the housing are covered.

3 Power Requirements

3.1 Daisy Chaining

The Phoenix Centrifugal Air Mover draws 2.6 amps. The 12

amp, on-board circuit breaker will allow four (4) Phoenix

Centrifugal Air Movers on one circuit. When daisy-chaining

the Phoenix Centrifugal Air Mover, turn on one Phoenix

Centrifugal Air Mover at a time to prevent excessive current

inrush caused by four units starting at once.

A ground fault in the Phoenix Centrifugal Air Mover Pro or

anywhere on the circuit will cause the Phoenix Centrifugal

Air Mover’s GFCI to trip. After rectifying the ground fault,

reset the GFCI by pressing the reset button.

• Use only Manufacturer’s recommended attachments.

Contact Therma-Stor for proper repair instructions.

• Do not pull or carry it by the power cord, use cord as a

handle, close doors on cord or pull cord around sharp

edges.

• Do not run or drive over cord.

• Keep cord away from heated surfaces.

• Do not handle power cord plug with wet hands.

• Turn off all controls before unplugging.

• Do not use when you are tired, distracted or under the

inﬂuence of drugs, alcohol or medication.

LIRE ET CONSERVER CES INSTRUCTIONS

• Risque de choc électrique Peut causer des blessures ou

la mort. Débrancher toutes les alimentations en courant

électrique à distance avant l’entretien ou le nettoyage.

• Ne pas utiliser l’appareil avec un cordon d’alimentation

coupé ou efﬁloché.

• Ne pas débrancher l’appareil en tirant sur le cordon. Tenir

la ﬁche fermement et la tirer hors de la prise murale ou

la prise d’alimentation électrique.

• Toujours utiliser une prise mise à la terre.

• Ne jamais utiliser l’équipement électrique dans de l’eau

stagnante.

• Ne jamais utiliser sans les grilles de protection. Des

blessures risquent d’en résulter.

• Ne pas brancher plus de 8 ampères au total au

différentiel.

• Vériﬁer la protection du différentiel avant chaque

utilisation en appuyant sur le bouton “ test “. Si l’appareil

fonctionne correctement, le bouton “ reset “ ressort.

• Ne pas passer les doigts ou d’autres objets dans les

grilles de protection.

• Ne pas diminuer le débit d’air arrivant jusqu’à l’appareil.

L’appareil risque de trop chauffer.

• Ne pas s’asseoir ou se tenir debout sur l’appareil; ne pas

l’utiliser comme étagère ou table.

• Avant de laisser un appareil aéraulique axial sans

surveillance, s’assurer que les enfants n’ont pas accès

à l’équipement. Ne pas laisser les enfants jouer avec

l’appareil ou à proximité de l’appareil ou dans l’air qu’il

projette.

• Pour réduire le risque d’incendie ou de choc électrique,

ne pas utiliser ce ventilateur avec un dispositif de

commande de vitesse à semi-conducteurs.

Dimensions Machine Shipping

Width 17.25” 17.3”

Height 20” 20”

Depth 19.4” 20”

Weight 27 lb 30 lb

Figure 1: Too many Centrifugal Air Movers daisy-chained

USEPHOENIX.COM

1.800.533.7533

3.2 Recommended Use

Recommended use(s) of on-board duplex GFCI are shown.

Note: Standard 115 VAC electrical outlets.

4 Operation Instructions

The Phoenix Centrifugal Air Mover Pro is intended for use

by water damage restoration, carpet cleaning, construction,

and janitorial/sanitation professionals in general ventilating

and structural surface drying applications. The Phoenix

Centrifugal Air Mover Pro as packaged is ready to be put

into service. Inspect the unit completely for any shipping

damage. Place the unit on the ground. Check the GFCI to

ensure it is not tripped. Plug the unit into a grounded outlet

and select the drying mode.

CAUTION: The Phoenix Centrifugal Air Mover Pro consumes

2.6 Amps on high speed. Do not plug devices requiring more

than 9.3 Amps of current into the duplex outlet.

5 Operator Panel Features

5.1 12 Amp Resettable Circuit Breaker

The 12 AMP thermal response resettable circuit breaker

protects the unit and devices connected to its duplex GFCI

outlet.

The circuit breaker is designed to sense the total current

draw through the circuit. The circuit breaker “trips” when

more than 12 amps of electrical current are drawn through

the device’s power cord. Should an over-current condition

occur, the Centrifugal Air Movers’ on-board circuit breaker

trips thus preventing nuisance visits to a remote power

junction box.

To reset on-board breaker, remove over drawing equipment.

Allow to cool for 10 minutes and reset breaker.

IMP0RTANT: Total amperage of the Centrifugal Air Mover

plus all devices plugged into the receptacle must not

exceed 12 amps. The circuit breaker will not allow for loads

in excess of 12 amps, although there is a time delay before

the overloaded circuit is broken.

5.2 Power Indication Lamp

The red, sealed, high intensity AC voltage power indication

lamp allows operators to visually identify the operation

status of several Phoenix Centrifugal Air Mover Pros at a

distance, with a single glance. The power indication lamp

will remain lit when the AC power cord is plugged into a

standard “powered” AC power outlet and the

3-Position drying selector switch is in either the HIGH or LOW

operation position. The power indication lamp will remain

unlit when the AC power cord is unplugged, the 3-Position

drying selector switch in the OFF position, the on-board

GFCI or 12 Amp circuit breaker is tripped, or the connected,

standard AC wall outlet power has been turned off.

5.3 3-Position Drying Selector Switch

The Phoenix Centrifugal Air Mover Pro features a three-

position switch - LOW–OFF–HIGH.

1. Inspect the machine for damage and airﬂow

obstructions prior to plugging it in or operating it.

2. Ensure the power switch is in the OFF (middle) position.

3. Place the machine into the desired position for

operation. Ensure that the machine rests stable and

secure and will not overturn.

4. Plug the power cord into a GFCI protected outlet. Do not

use an extension cord in conjunction with the standard

power cord.

5. Turn the unit on to the desired speed, high or low.

12 Amp

Circuit Breaker

GFCI Outlet

Stainless

Steel

Control

Panel

AC Indicator

Lamp

High Speed:

“Ultra”

Drying Power

Low Speed:

Quiet Operation

Figure 3: Centrifugal Air Mover Pro Operator

Panel

www.usephoenix.com • sales@thermastor.comToll-Free 1-800-533-7533

4 Operation Instructions

The Phoenix Centrifugal Air Mover is intended for use by

water damage restoration, carpet cleaning, construction,

and janitorial/sanitation professionals in general

ventilating and structural surface drying applications. The

Phoenix Centrifugal Air Mover as packaged is ready to

be put into service. Inspect the unit completely for any

shipping damage. Place the unit on the ground. Check

the GFCI to ensure it is not tripped. Plug the unit into a

grounded outlet and select the drying mode.

CAUTION: The Phoenix Centrifugal Air Mover consumes 2.7

Amps on high speed. Do not plug devices requiring more

than 9.3 Amps of current into the duplex outlet.

5 Operator Panel Features

5.1 12 Amp Resettable Circuit Breaker

The 12 AMP thermal response resettable circuit breaker

protects the unit and devices connected to its duplex GFCI

outlet.

The circuit breaker is designed to sense the total current

draw through the circuit. The circuit breaker “trips” when

more than 12 amps of electrical current are drawn through

the device’s power cord. Should an over-current condition

occur, the Centrifugal Air Movers’ on-board circuit breaker

trips thus preventing nuisance visits to a remote power

junction box.

To reset on board breaker, remove over drawing equipment.

Allow to cool for 10 minutes and reset breaker.

IMPORTANT: Total amperage of the Centrifugal Air Mover

plus all devices plugged into the receptacle must not

exceed 12 amps. The circuit breaker will not allow for loads

in excess of 12 amps, although there is a time delay before

the overloaded circuit is broken.

5.2 Power Indication Lamp

The red, sealed, high intensity AC voltage power indication

lamp allows operators to visually identify the operation

status of several Phoenix Centrifugal Air Movers at a

distance, with a single glance. The power indication lamp

will remain lit when the AC power cord is plugged into a

standard “powered” AC power outlet and the

3-Position drying selector switch is in either the HIGH or

LOW operation position. The power indication lamp will

remain unlit when the AC power cord is unplugged, the

3-Position drying selector switch in the OFF position, the

on-board GFCI or 12 Amp circuit breaker is tripped, or the

connected, standard AC wall outlet power has been turned

off.

5.3 3-Position Drying Selector Switch

The Phoenix Centrifugal Air Mover features a three-position

switch - LOW–OFF–HIGH.

1. Inspect the machine for damage and airﬂow

obstructions prior to plugging it in or operating it.

2. Ensure the power switch is in the OFF (middle)

position.

3. Place the machine into the desired position for

operation. Ensure that the machine rests stable and

secure and will not overturn.

4. Plug the power cord into a GFCI protected outlet. Do

not use an extension cord in conjunction with the

standard power cord.

5. Turn the unit on to the desired speed, high or low.

3.2 Recommended Use

Recommended use(s) of on-board duplex GFCI are shown.

Note: Standard 115 VAC electrical outlets.

15 Amp

Outlet

15 Amp

Outlet

15 Amp

Outlet

Phoenix 200 MAX

Phoenix Mini-Guardian

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Phoenix

CAM

Figure 2: Duplex GFCI use

12 Amp

Circuit Breaker

GFCI Outlet

Stainless

Steel

Control

Panel

AC Indicator

Lamp

High Speed:

“Ultra”

Drying Power

Low Speed:

Quiet Operation

Figure 3: Centrifugal Air Mover Operator Panel

USEPHOENIX.COM

1.800.533.7533

Speciﬁcations subject to change without notice.

5.4 GFCI Protection and the On-Board Duplex

Outlet

The standard AC voltage outlet GFCI (Ground Fault Circuit

Interrupter) promotes operator safety in wet applications.

GFCI devices trip when a fault to electrical ground is sensed.

It is recommended to check the GFCI protection prior to

operation. To check, push the “TEST” button located on the

GFCI duplex outlet will pop out. If operating properly the

“RESET” button on the GFCI outlet will pop out. Depending

on your Centrifugal Air Movers speciﬁc equipment, a tripped

GFCI may be indicated by a small LED. The device can only

be “RESET” when the Centrifugal Air Mover is connected to a

wall outlet providing standard voltage. This duplex AC outlet

allows the inter-connection of other AC powered devices. The

sum total amperage of all devices (excluding the ﬁrst fan)

plugged into the receptacle must not exceed 8.5 amps.

6 How to Stack

Place your ﬁrst fan on the ﬂoor, motor side down. Pick up

your second fan and orient it above the ﬁrst fan. Engage

the alignment nubs on the side of both snouts. Rotate the

second fan down into position until the grills engage. If the

fans will be transported while stacked, they must be securely

strapped into position.

Low Speed:

Quiet Operation

7 Maintenance

WARNING: Disconnect the unit from power before servicing

or cleaning. Replace the safety grill after

servicing, lubrication or cleaning.

7.1 Servicing

Before each use, inspect for damage, blocked inlet or outlet,

or any excess buildup of foreign material.

Inspect the GFCI to ensure it is not in a “tripped” condition.

Push “RESET” to reset the GFCI.

When the Phoenix Centrifugal Air Mover Pro is ﬁrst turned

on, check for excessive vibration. If the unit vibrates

excessively or if blower wheel rubs on housing, turn off the

unit immediately. Have a service technician inspect the unit

to locate the problem.

7.2 Cleaning

The housing is made of a durable and washable

polyethylene. When cleaning, the use of solvents is NOT

recommended.

8 Replacement Parts and

Optional Accessories

4030989 motor, 60HZ

4027572 blower wheel

4029721 rocker switch

4025458 red pilot light

4029742 cord

4030982 inlet grill, motor side

4030983 inlet grill, wheel side

4030984 grill, snout

4025203 breaker

4025205 GFCI

Contact the factory at 1-800-533-7533 to order

replacement parts, or optional accessories

PNs 4030990 and

4030980 are pictured

to demonstrate

maximum stackability.

USEPHOENIX.COM

1.800.533.7533

PUR

WHT

LOW

HIGH

HOT

NEUTRAL

BREAKER

THWKLB

WHTBLK

LOAD

LINE

GROUNDED

GFCI

DUPLEX

PLUG

12 AMP

CIRCUIT

WHT

ORG

9 Wiring Diagram

USEPHOENIX.COM

1.800.533.7533

Warrantor:

Therma-Stor LLC

4201 Lien Rd

Madison, WI 53704

Telephone: 1-800-533-7533

Warranty: This warranty covers Phoenix Stackable Centrifugal Air Mover Pros, Part Number 4030990

Year One: - 100% parts and labor (all components)

Year Two: - 100% parts only (all components)

Year Three: - Materails and workmanship of the housing only are covered.

If a defect in materials or workmanship occurs within the warranty period, Therma-Stor LLC will repair or

replace the defect.

End-User Responsibilities: Warranty service must be performed by a servicer authorized by Therma-Stor LLC.

To obtain warranty service you must obtain a return material authorization (RMA). To obtain an RMA you must

present proof of purchase or (lease), by use of a warranty card, original sales receipt or other reasonable

and reliable means. To obtain an RMA call Therma-Stor LLC at the above number and ask for the Therma-

Stor LLC Service Department, which will then issue an RMA# and arrange for, at our option, either repair or

replacement.

Freight: Freight to and from the servicer is the responsibility of the end-user. The end-user is responsible for

normal care and proper return packaging.

Limitations and Exclusions: This warranty does not cover any defect, malfunction, etc. resulting from misuse,

abuse, lack of normal care, corrosion, freezing, tampering, modiﬁcation, unauthorized or improper repair or

installation, accident, acts of nature or any other cause beyond Therma-Stor LLC’s reasonable control.

If any Phoenix Centrifugal Air Mover part is repaired or replaced, the new part shall be warranted for the

balance of original warranty (but all warranty periods will be extended by the period of time, if any, that the

Phoenix Centrifugal Air Mover is out of service while awaiting covered warranty service).

Warranty service will be performed during normal working hours.

UPON THE EXPIRATION OF THE WRITTEN WARRANTY APPLICABLE TO THE PHOENIX CENTRIFUGAL AIR

MOVER OR ANY PART THEREOF, ALL OTHER WARRANTIES IMPLIED BY LAW, INCLUDING MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, SHALL ALSO EXPIRE. ALL WARRANTIES MADE BY THERMA-

STOR LLC ARE SET FORTH HEREIN, AND NO CLAIM MAY BE MADE AGAINST THERMA-STOR BASED ON ANY

ORAL WARRANTY. IN NO EVENT SHALL THERMA-STOR LLC, IN CONNECTION WITH THE SALE, INSTALLATION,

USE, REPAIR OR REPLACEMENT OF ANY PHOENIX CENTRIFUGAL AIR MOVER OR PART THEREOF BE LIABLE

UNDER ANY LEGAL THEORY FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING

WITHOUT LIMITATION WATER DAMAGE (THE END USER SHOULD TAKE PRECAUTIONS AGAINST SAME), LOST

PROFITS, DELAY, OR LOSS OF USE OR DAMAGE TO ANY REAL OR PERSONAL PROPERTY.

Some states do not allow limitations on how long an implied warranty lasts, and some do not allow the

exclusion or limitation of incidental or consequential damages, so one or both of these limitations may not

apply to you.

Legal Rights: This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from

state to state.

4201 LIEN RD. • MADISON, WI 53704

Phoenix Stackable CAM Pro - Centrifugal Air Mover

LIMITED WARRANTY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phoenix Lüfter Handbücher

Phoenix

Phoenix AirMax Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung