Phoenix Solar Bedienungsanleitung

©Phoenix Safe Company Ltd. V1 / AUG 2017

SOLAR Basic

Operating instructions for electronic high-security locks

DS4650 Millenium Duplex Instructions

2/13

Table of contents

General notes .......................................................................................................................................3

Functional overview and description ...................................................................................................4

1. Opening / Closing .............................................................................................................................5

2. Changing the code ...........................................................................................................................6

3. Retrieve opening protocol ...............................................................................................................7

4. Super code functions .......................................................................................................................8

5. Power supply ..................................................................................................................................10

6. Restart ............................................................................................................................................11

7. Signal table .....................................................................................................................................11

8. Technical data and certification .....................................................................................................12

9. Quick guide SOLAR Basic ................................................................................................................13

DS4650 Millenium Duplex Instructions

3/13

General notes

 Please read these instructions carefully before making any adjustments to the lock.

 The lock acknowledges every press of a button with an acoustic signal. Concluded or

cancelled procedures are displayed by the illumination of the LE , together with acoustic

signals. (see signal overview)

 Input pauses of more than 20 seconds between buttons will interrupt the ongoing input.

In case of input errors, each procedure can be cancelled by pressing the button .

 We recommend regularly inspecting the safe and the control unit for signs of

manipulation. In case of suspicious marks, contact your dealer immediately to rule out

possible manipulation.

 The following codes are preset from the factory and must be changed for security

reasons. Perform all changes only with the door open and the locking mechanism closed

(bolts extend from the door).

Code

Opening code 1 2 3 4 5 6

SUPER 1 1 1 1 1 1 1

Function and use of the super code, see item 4

 The lock must first be opened to change the settings.

 The lock is locked and unlocked by a motor. When the motor is moving, the LE

above the keypad is illuminated. Never pull the handle of the locking mechanism while

the motor is moving the bolt. This can lead to lock damage.

 Only use alkaline batteries in accordance with the technical specifications in the appendix

to these instructions.

 Symbols and their meanings

x sec Hold X seconds Long tone

x sec Wait X seconds LE illuminates / blinks

Short tone

Lock open Lock closed

DS4650 Millenium Duplex Instructions

4/13

Functional overview and description

Opening code

The lock uses an individual user code, which makes opening, changing the code, and

reading out the protocol possible.

Super code

The super code is an emergency code and can reset the lock to the factory settings.

anipulation block

If four invalid opening codes are entered, three long tones sound with simultaneous

illumination of the red LE . Operations are blocked for five minutes, which can be seen

by the 8-second blinking interval of the red LE . If an incorrect entry is again made after

the duration of the blocking period, the five-minute blocking period begins once more.

This is only overridden by the entry of a valid code.

Emergency power

If the battery is completely discharged and the lock can no longer be opened, the lock can

be supplied with power externally. For this, read item 5, sub item 2, emergency power.

Restart

If entries cannot be made as usual, the operating system of the lock can be restarted. All

codes and settings are retained during this.

DS4650 Millenium Duplex Instructions

5/13

1. Opening / Closing

1.1 Opening

Example with factory code.

Button Signal Description

Code input

3sec Correct Incorrect

After correct entries, the handle of the locking mechanism can be moved and the safe opened.

Only pull the handle once the lock has been completely opened (LE blinks 1x).

After an incorrect entry, the procedure can be repeated three times. Then, a blocking period

of 5 minutes goes into effect (manipulation block).

1.2 Closing

Ensure that the handle of the locking mechanism is completely in the closed position.

Button / example Signal Description

Closing

3sec Closed

After pressing the button , the handle of the locking mechanism may not be pulled until the

lock has locked. After locking, you must check whether the container is closed by pulling the handle

of the locking mechanism.

DS4650 Millenium Duplex Instructions

6/13

2. Changing the code

Example with factory code with an opened lock.

In opened lock condition

Button Signal Description

3sec Start programming

Code

Enter new code

Repeat new code

Confirm and close

Changed Error

In case of a long, acoustic signal, the code has not been changed due to an incorrect entry. The

old code is still active. You must repeat the procedure.

After successfully changing the code, the new code must be tested by opening and closing

numerous times with the door open and the locking mechanism closed.

For security reasons, set codes should not be written down.

DS4650 Millenium Duplex Instructions

7/13

3. Retrieve opening protocol

The lock saves the last 32 openings and events. This protocol can be retrieved by the user. Output

is made by means of a different number of acoustic and optical signals in accordance with the table

below. The latest event is output first.

In opened lock condition

Button Signal Description

3sec Start programming

Code

Start output

Confirm and start

Signal Description Signal Description

1x User 3x Mechanical blocking

2x Super code 4x Battery low voltage

1x Separates users / events

DS4650 Millenium Duplex Instructions

8/13

4. Super code functions

The super code is preset from the factory at (7x1). It can open the lock and

reset the opening code.

4.1 Change super code

The super code can be changed with the opening code.

In opened lock condition

Button Signal Description

3sec Start programming

Code

Enter new super code

Repeat new super code

Changed Error

The super code is not a regular opening code and is only intended for emergencies. The factory

setting must be changed for security reasons. Even if it is only used in exceptional cases and is

therefore difficult to remember, this code may not be written down.

DS4650 Millenium Duplex Instructions

9/13

4.2 Opening with the super code

If the opening code is lost or the blocking period is active, the lock can be opened with the super

code.

Button Signal Description

6sec Start super code opening

Super code

3sec Open Error

4.3 Resetting the opening code by means of the super code

If the opening code is lost, this can be reset with the super code.

In opened lock condition

Button Signal Description

6sec 3sec

3sec

Start reset

Super code

Confirm and close

Changed Error

After a successful reset, the opening code is set to and must now be

changed again.

DS4650 Millenium Duplex Instructions

10/13

5. Power supply

5.1 Changing the battery

Power is supplied by a 9V-block battery (Caution: only use alkaline or lithium batteries). The battery

compartment is accessible when the door is open and is visibly installed in the door frame or

directly on the interior of the door, depending upon the type of safe (when changing the battery,

pay attention to correct battery polarity). It is necessary to change the battery if a long signal

sounds before the short tone after the lock opens. The battery must be changed as soon as

possible, because sure operation is no longer guaranteed after approximately ten further

activations.

5.2 Emergency power

If the battery is completely discharged and the safe is closed, proceed as follows.

1. Remove the keypad from the bracket by carefully prying with a flat, dull screwdriver on the

edge of the keypad between 4 and 7, above the LE and between 6 and 9

2. Pull the keypad out approximately 5 cm with both cables and lift it.

3. Clip the new 9V battery into the two poles (large to small, small to large) on the back. Here,

provide support with your fingers on the front of the keypad between 0 and 9.

4. Now, proceed in accordance with the operating instructions, item Opening, and open the

safe.

5. Open the battery compartment on the inside, carefully remove the new battery from the

back of the keypad, and exchange it for the dead battery.

6. Push the keypad cables carefully back into the door and snap the keypad back into the

bracket.

Prying the keypad from the bracket on the sides will leave marks on the bracket. This is

intentional and protects you against illegal manipulation of the lock by unauthorized third parties.

If necessary, you can order a new bracket from the manufacturer.

DS4650 Millenium Duplex Instructions

Inhaltsverzeichnis

Andere Phoenix Sperren Handbücher

Phoenix

Phoenix SELO-A Bedienungsanleitung

Phoenix

Phoenix SS1620E Series Bedienungsanleitung

Phoenix

Phoenix FS1290 Series Bedienungsanleitung

Phoenix

Phoenix DS4620E Bedienungsanleitung

Phoenix

Phoenix PS210 Bedienungsanleitung

Phoenix

Phoenix FS1900E Series Bedienungsanleitung

Phoenix

Phoenix FS 2250E Bedienungsanleitung

Phoenix

Phoenix SS1180 Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix FS0440E Series Bedienungsanleitung

Phoenix

Phoenix FS1280E Bedienungsanleitung

Phoenix

Phoenix FS1510E Series Bedienungsanleitung

Phoenix

Phoenix R3 Bedienungsanleitung

Phoenix

Phoenix SS0990E Series Bedienungsanleitung

Phoenix

Phoenix PS310 Bedienungsanleitung

Phoenix

Phoenix FS1510E Bedienungsanleitung

Phoenix

Phoenix Titan Aqua FS1290 Series Bedienungsanleitung

Phoenix

Phoenix DS2500E Series Bedienungsanleitung

Phoenix

Phoenix KS0002C Series Bedienungsanleitung

Phoenix

Phoenix FS1300 Produktinformationsblatt

Phoenix

Phoenix R3 Bedienungsanleitung

Phoenix

Phoenix SELO-B Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung