Phoenix SPECTRUM LS6000 Bedienungsanleitung

SPECTRUM

LS6000

Operating

Instructions

Contents Page

1 Batteries 3

2 Opening 4

3 Setting User Code 4

4 Locking 5

5 LED Light 5

6 Multi-user mode & Dual-user mode 6

7 Changing Door Panel 7

Contents

FOR SAFETY

Prior to using the safe, please read the instructions carefully.

Cautions when placing the safe.

The safe is heavy and should be handled very carefully.

Never move the safe with the door open.

Place the safe on at oor.

Cautions when using the safe.

Be careful not to slam the door closed.

Be careful not to trap hands or ngers when closing door.

As the safe is heavy and operated with a smart digital lock, it is not recommended

that children operate the safe.

Be careful not to forget the user code, and keep the instruction outside of the safe.

Components

Prior to using safe, install 4pcs of AA alkaline batteries.

(LED ickers, Bi Bi Bi sound, Melody rings for 1 second)

* Non-alkaline and rechargeable batteries are not

recommended.

The batteries need to be replaced when ‘Bi-ric’ sound is

emitted when any button is pressed.

Replace all 4 batteries at the same time.

* Battery life span : 1 year (Average openings 3 times a day)

* When the batteries are replaced, the registered user code is

not erased.

* Note: If the door does not open in spite of the correct user

code being entered, please change the batteries before calling

for service.

Instructions Drawer Shelf Shelf Clips

(4pcs)

1.5V Alkaline

AA Batteries

(4pcs)

Memory Button

LEDLight

Digital Lock

Door Panel

1. Batteries

2. Opening

NOTE: If wrong code is tried, Red LED ickers sounding Bi Bi Bi Bi.

Paralysis: If a wrong code is entered 5 times, the lock will be paralyzed for 5 minutes

Remaining paralysis time can be checked via the LED.

Eg) In the case of 4 minutes remaining, LED ickers 4 times every 10 seconds.

Scramble Numbers: The code can be disguised by inserting random numbers either before, after

or both before and after the user code. E.g. user code of 1234, xxx1234, 1234xxx or xxx1234xxx.

Total of 32 numbers can be accepted.

Mute sound: You can hide the button sound.

SET: M 7 #

UNSET: M # 7 #

3. Set User Code

NOTE: 1) Prior to closing the door, check the new code has been registered correctly by

following 2. Opening.

2) It is not recommended to use codes such as a telephone numbers, birthday or

consecutive numbers for security reasons.

1 ) Press C Button

(Bi sound, LED ickers)

2 ) Enter User Code

(LED ickers, Bi sound)

(Factory Code 1 2 3 4)

3 ) Press # Button

(Melody rings)

4 ) Open the door

1 ) Press MButton on the back of the door. 2 ) Enter New Code

(4 ~16 digits)

3 ) Press #Button.

(Melody rings)

Keep the door open.

4. Locking

NOTE: 1) Don’t close the door with the bolts in the locked position.

2) If door is unlocked when #button pressed, red LED turns on sounding Bi Bi Bi Bi.

- Door may not be closed because of over inside matters.

Door open alert: If the door is not locked within 1 minute after opening, an alert will sound for

30 seconds.

5. LED Light

1) Close the door 2 ) Press # Button

(LED ickers with melody)

LED turns on for 15 seconds, each time the Cbutton is pressed.

6. Multi-user mode & Dual-user mode

Multi-user mode

Multi-user mode: Two users can independently open the safe with their own user code.

Dual-user mode: Two different codes should be entered consecutively to open the safe.

* Both modes can not be used simultaneously.

SET: M 2 # 2nd Code #

NOTE: 1) Prior to closing the door, conrm the 2nd code has been registered correctly by

following 2. Opening

2) 2nd code can be changed in the same way as Multi-user mode > set .

3) For setting or changing 1st code, please do as shown in 3. Setting User Code .

UNSET: M # 2 #

NOTE: When unsetting multi user codes the 2nd code is removed automatically. The 1st code

will be retained.

OPEN: C 1st Code or 2nd Code # Open the door

Dual-user mode

SET: M 9 # 2nd Code #

NOTE: 1) Prior to closing the door, conrm the ngerprint has been registered correctly as

shown in 2. Opening

2) 2nd code can be changed in the same way as the initial set up Dual-user mode > SET

3) For setting or changing the 1st code, please follow the instructions in 3. Set User

Code.

UNSET: M # 9 #

NOTE: When unsetting dual mode, the 2nd code is removed automatically. The 1st code will be

retained.

OPEN: C 1st Code # 2nd Code # Open the door

7. Changing Door Panel

When changing the panel please take care not to trap ngers in between the panel and door

frame. It is recommended when replacing the panel with a new one, to wear gloves.

1 ) Hold and adjust the panel to allow the

position guide to locate into the xing hole.

2 ) Push the panel into the door frame to

attach.

1 ) Place a nger into the hinge hole on upper

right side of door frame and push the panel

outwards to detach.

2 ) Lift the panel up to detach.

DETACH PANEL

ATTACH PANEL

Need support?

We’re here if you need us.

Web www.phoenixsafe.co.uk

Email [email protected]

Phone 0151 944 6444

Where peace of mind

is guaranteed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Phoenix Sicher Handbücher

Phoenix

Phoenix SS0987E Series Bedienungsanleitung

Phoenix

Phoenix FORTRESS II SS1182E Produktinformationsblatt

Phoenix

Phoenix FS2230K Series Bedienungsanleitung

Phoenix

Phoenix FS0430E Series Bedienungsanleitung

Phoenix

Phoenix NEPTUNE HS1056 Produktinformationsblatt

Phoenix

Phoenix SS0800K Produktinformationsblatt

Phoenix

Phoenix PLANET HS6070 Produktinformationsblatt

Phoenix

Phoenix FS1920E Produktinformationsblatt

Phoenix

Phoenix DS2500E Bedienungsanleitung

Phoenix

Phoenix SS0800E Series Bedienungsanleitung

Phoenix

Phoenix SS0992E Bedienungsanleitung

Phoenix

Phoenix PS610-E36 Produktinformationsblatt

Phoenix

Phoenix FS2250K Series Bedienungsanleitung

Phoenix

Phoenix FS0440E Bedienungsanleitung

Phoenix

Phoenix Mercury HS2050 Handbuch

Phoenix

Phoenix NEXT PLUS LS7010 Bedienungsanleitung

Phoenix

Phoenix SS1170K Bedienungsanleitung

Phoenix

Phoenix Venus Bedienungsanleitung

Phoenix

Phoenix DIAMOND DEPOSIT HS1090 Produktinformationsblatt

Phoenix

Phoenix SS0720E Series Bedienungsanleitung

Phoenix

Phoenix SS0800E Produktinformationsblatt

Phoenix

Phoenix DS4620E Bedienungsanleitung

Phoenix

Phoenix SS1190K Installations- und Benutzerhandbuch

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Intratone

Intratone KEY SAFE Leitfaden

Costway

Costway HW50956 Bedienungsanleitung

Megasat

Megasat K Series Bedienungsanleitung

ECOSAFE

ECOSAFE 3030ARD Bedienungsanleitung