Phonak Roger Pen Montageanleitung
MED-EL
Meridian Parkway | Suite | Durham, NC
USA: implants.us@medel.com CANADA: officecanada@medel.com
r.
Turn On/Off Roger Pen
Hold down seconds until green light (on) or red light (off) appears.
While Roger Pen is on, it will continue to blink green.
Syncing with Roger™Receivers
Hold this button down with receiver (Roger X, Roger , or Roger MyLink)
no more than " away.
Light on Roger Pen will ash blue one time, then green to indicate it issynced.
The user will hear a conrmation tone if they are syncing while "on-air."
Changing Microphone Modes
Press to change to different mic modes:
. Automatic (default)
. Interview
. Conference
. Lanyard
To Mute Roger Pen
Just quickly tap the power button. Indicator light will turn violet.
To un-mute, tap it again and the light will blink green again.
Pairing Roger Pen to Your Phone
In your phone, make sure the Bluetooth setting is ON
and your Roger Pen is ON.
Press green "answer" phone icon until blue light appears,
then green light, then blinking blue. (approx. 8 seconds)
Select Roger Pen option from list of devices.
(If there are multiple devices already paired with phone, you may have
to scroll down the list to reveal the Roger Pen that is being paired.)
Turning On Bluetooth on Roger Pen
Press and hold green "answer" phone icon for seconds.
Blue light will glow, then return to blinking green light. (Bluetooth will
remain active even when the Roger Pen is off - and still blink blue.
Turning Off Bluetooth on Roger Pen
Make sure Roger Pen is ON (blinking green).
Press red "end call" phone icon until blue light fades. (approx. 3 seconds)
SONNET
with Roger X
Image courtesy
of Phonak
SONNET
with Roger
Troubleshooting Tips
If you attach a receiver to your processor
and it is not connecting with the Roger Pen:
– While the Roger Pen is on, simply
remove the receiver completely and
then connect back to the processor.
OR
– Re-sync the Roger Pen with the
receiver as instructed above.
Roger™ is a registered trademark of Phonak.
Please consult the respective user manuals for
ofcial documentation and usage.
Using Roger™Pen™
QUICK TIPS
MED-EL
Meridian Parkway | Suite | Durham, NC
USA: implants.us@medel.com CANADA: officecanada@medel.com
r.
Turn On/Off Roger™Select
Hold POWER button down seconds until green lights appear (on)
or disappear (off). While Roger Select is on, the power button will
continue to blink green.
Syncing with Roger Receivers
Connect a receiver (Roger or Roger X) to the processor or use a Roger
MyLink. (Processor and MyLink must be turned on.) Position the Roger Select
no more than ” away from the processor or Roger MyLink.
Firmly push the Roger Select’s SYNC button once (do not hold it down.)
Roger Select will quickly ash blue, then green to show successful syncing.
If syncing while wearing the processor, an audible dual beep will be heard.
Changing Microphone Modes
Just tap on the Roger Select to choose which of its six microphones you
wish to activate. The green lights will appear to show which microphones are
active. Tap again to mute the microphone(s), and the light(s) will go off.
To mute all microphones, tap in the center of the Roger Select and a red
light will appear. Tap again to reactivate the microphones.
When using as a lanyard mic, the Roger Select will automatically activate
the microphone closest to the speaker’s mouth.
When repositioned to a table mode, the Roger Select will automatically
activate all six microphones.
Pairing Roger Select to Your Phone
In your phone, make sure the Bluetooth setting is ON
and your Roger Select is ON.
Press Bluetooth icon once and a blinking blue light appears.
Choose Roger Select option from list of devices.
(If there are multiple devices already paired with phone, you may have
to scroll down the list to reveal the Roger Select that is being paired.)
Your phone is now paired and the Roger Select’s inner circle of lights
will intermittently blink blue to show that Bluetooth is active.
Turning Off Bluetooth on Roger Select
Press Bluetooth button until blue light fades. (approx. 2 seconds)
To turn Bluetooth back on, simply repeat this step and the
blue light will appear. (You may need to double-check that the
Roger Select shows as “connected” to your phone or audio device.)
Troubleshooting Tips
If you attach a receiver to your processor and
it is not connecting with the Roger Select:
– While the Roger Select is on, simply
remove the receiver completely, wait a
few seconds and then connect back to
the processor.
OR
– Re-sync the Roger Select with the
receiver as instructed above.
Images and illustrations
courtesy of Phonak
Using Roger™Select™
QUICK TIPS
Roger™ is a registered trademark of Phonak.
Please consult the respective user manuals for
ofcial documentation and usage.
MED-EL
Meridian Parkway | Suite | Durham, NC
USA: implants.us@medel.com CANADA: officecanada@medel.com
r.
Certain Roger™transmitters (Roger Pen/Roger Select) are designed to
function as wireless remote transmitters/microphones for phone calls.
However, listening to music or other streamed audio may require an
accessory cable. It connects the media device directly to these
transmitters, so that it can stream the audio to your processor.
A third-party app known as an “A2DP Blocker“ (not developed by
MED-EL or Phonak) may provide a work-around that allows all audio
(phone calls, music, video, etc) to stream without the need for an
accessory cable. (Since the app converts to the signal to an older prole, the
overall quality may be lower – but may be sufcient for most applications.)
iOS: ADPblocker-Bluetooth Mono
Android: Dynamic Media BT Router (via Google Play)
Make sure the transmitter is paired to your
device (phone/tablet/etc.) and Bluetooth is
activated on both the device and the transmitter.
Consult appropriate user guides for this step, if needed.
Download/Open ADP Blocker App (iOS)
Purchase costs may apply.
Open the app and change the Device Audio to "headset+"
If you get a pop-up message about "Playback Queue," just close it.
Leave ADP Blocker open and go to a media app and play your
music or video (iTunes, YouTube, Netix, etc.). ADP Blocker app
must be running in the background in order for audio to stream
wirelessly to the transmitter.
Adjust volume on the device.
Phone calls
You can accept incoming calls while listening to music or streaming
video. The call will take priority and the streamed media will pause.
If you choose to answer the call, you may have to tell the phone to
listen with the transmitter. (It usually defaults back to the phone's
headpiece. For information on selecting Bluetooth receivers on your
phone/device, check its user manual.)
When you are nished with call, you can return to listening to music/
video simply by playing it again.
Note about ADP Blocker apps:
These apps are provided by third-party
developers and not MED-EL or Phonak.
For troubleshooting the app, please
consult directly with its developer.
Using ADP Blocker App
QUICK TIPS
Roger™ is a registered trademark of Phonak.
Please consult the respective user manuals for
ofcial documentation and usage.
Andere Handbücher für Roger Pen
10
Dieses Handbuch passt für folgende Modelle
1
Andere Phonak Hörgerät Handbücher
Phonak
Phonak Roger Pass-around Bedienungsanleitung
Phonak
Phonak SaviaArt Bedienungsanleitung
Phonak
Phonak ComPilot Bedienungsanleitung
Phonak
Phonak Roger Focus Bedienungsanleitung
Phonak
Phonak Audeo P90-R Bedienungsanleitung
Phonak
Phonak Naida UltraPower Bedienungsanleitung
Phonak
Phonak NHS Nathos Nova Bedienungsanleitung
Phonak
Phonak Roger Clip-On Mic Bedienungsanleitung
Phonak
Phonak Brio 4 B-312 Bedienungsanleitung
Phonak
Phonak CROS Bedienungsanleitung
Phonak
Phonak Lyric Bedienungsanleitung
Phonak
Phonak Naida S Bedienungsanleitung
Phonak
Phonak TVLink S Bedienungsanleitung
Phonak
Phonak TV Connector Einrichtungshandbuch
Phonak
Phonak Ambra Bedienungsanleitung
Phonak
Phonak LYRIC3 Bedienungsanleitung
Phonak
Phonak ComPilot Air II Bedienungsanleitung
Phonak
Phonak PicoForte3 Bedienungsanleitung
Phonak
Phonak iCube II Bedienungsanleitung
Phonak
Phonak Certena micro Bedienungsanleitung
Beliebte Hörgerät Handbücher anderer Marken
Williams Sound
Williams Sound SoundPlus WIR 237 Leitfaden
Oticon Medical
Oticon Medical Ponto SoundConnector Bedienungsanleitung
Siemens
Siemens Life micon Bedienungsanleitung
Starkey
Starkey Destiny Bedienungsanleitung
Audicus
Audicus The Icon Bedienungsanleitung
Advanced Bionics
Advanced Bionics Slim HP Standard Bedienungsanleitung
