Phylink PLC-325PW Bullet HD Bedienungsanleitung
VERSION 1.2
Contents
1. Verify the package contents
Verify the package contents against the list below.
PLC-325PW/PLC-335PW Network Camera
Camera Stand
External Antenna
Manual and Software on CD-ROM
CAT5 Ethernet Cable
Power Adapter
Quick Install Guide
1. Verify the package contents ................................................................ 2
2. Hardware Overview .................................................................................3
3. Hardware Installation ............................................................................. 5
4. Quick installation for iOS device ........................................................ 6
5. Quick installation for Android device .............................................12
6. Camera installation on PC ...................................................................17
7. Installation via Web Browser ............................................................. 24
PHYLINK Bullet HD Quick Install Guide
This installation guide provides basic instructions for installing the PLC-325PW/
PLC-335PW on your network and then configure Android, iOS App and PC software to
view the camera.
Phylink’s website contains the latest user documentation and software updates for
Phylink’s products. Please visit www.phylink.com for more details.
For more information about how to use the camera, please see the User Manual on the
CD included with this package.
2. Hardware Overview
2
1
3
5
7
6
4
8
9
10
11
12
1
3
5
13
1. Sun Shield
2. External Antenna
3. Front Shell
4. Microphone
5. Stand
6. Reset/WPS Button
7. Camera Cable
8. Status indicator LED
9. Infrared LED
10. Light Sensor
11. Power Jack
12. Ethernet RJ45 connector
13. Micro SD Card slot
14
14. Wrench
PHYLINK Bullet HD Quick Install Guide
Monitors lighting conditions and switches
between color and infrared accordingly.
Light sensor
Local storage for storing recorded image
and video.
Micro SD Card slot
PHYLINK Bullet HD Quick Install Guide
Connects to the included DC 12V power adapter.
Power Jack
Reset/WPS Button
Press and hold this button for 5 seconds to reset the camera.
Note that all settings will be restored to factory default.
Status indicator LED
Short press this button to setup a wireless connectionautomatically.
After camera is powered on, the indicator LED shows yellow light and quickly off
which means the system is being started. When the indicator LED shows yellow
again, it means the system has started successfully.
Red light is for wired connection and WPS status, yellow light for wireless connection.
The indicator LED flashes during data transfer.
The design of wrench on the stand makes you easily screw the joint of stand
without any extra tool.
Wrench on the stand
You can tighten the wrench on the stand when the mounting is complete.
3. Hardware Installation
IMPORTANT! - The PHYLINK Bullet is for waterproof design, but when you take
off the Front Shell to insert a Micro SD-card, you must screw the Front Shell back
tightly to avoid water leakage and humidity.
Connection Using AC adapter
Connect the camera to your switch or router using the provided network cable.
Connect the AC adapter cable from the camera to a power outlet.
The PHYLINK Bullet offers exceptional video quality and audio on your PC, MAC, and
smart phone, whether at home or in the office.
Real waterproof with IP66 Certificate. Rotatable stand for easier outdoor installation
around your house, indoor or outdoor.
Fully compatible connectivity, works over Wi-Fi, Ethernet, or Power over Ethernet
(PoE) 802.3af.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable. You don’t need to
Connect the AC adapter in this case.
Mount the antenna
If using a Wi-Fi Network, the provided external antenna must be mounted to the SMA
connector on the camera body.
Mount the camera
1. Attach the alignment sticker to the wall. Drill three holes into the wall. Then hammer
the supplied plastic anchors into the holes and secure the plate with supplied screws.
3. Once you mount the camera upon the ceiling or the wall, you need to tighten the
joint of stand. The design of wrench on the stand makes you easily screw the joint
without any extra tool.
2. Adjust the angle of the camera to aim at the shooting area.
PHYLINK Bullet HD Quick Install Guide
Note: DHCP sever and UDP port must be enabled on your router (which is default
setting on most router) to assign an IP address to the network camera. If needed,
please refer to your router's user manual on how to enable DHCP server and UDP.
4. Quick installation for iOS device
4.1 Camera installation on iOS device
There are three ways to add a camera on an iOS device.
Event Playback Add Camera Info
Camera
Add Camera
iPad 17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.105
Option 1
Automatically search in Local Area Network
Add Camera
iPad 17:50 63%
Cancel
Name
THG5T55K2RY7K1VWC7XJ
Save
Camera
UID
Account admin
PasswordPassword
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
If your camera is in the same Local Area Network with your smartphone, the App can
search the cameras automatically. If the camera UID shows up on list then press the
UID for the camera you are setting up.
PHYLINK Bullet HD Quick Install Guide
Search "PHYCAM" App from App Store, download and install it.
Start the App and then the " " screen will appear.Add Camera
Option 2
Scan the camera UID using Smartphone
Manually type UID
Option 3
If your camera is not in the same Local Area Network with your Smart phone,
the App can NOT search cameras for Local Network.
Press " " button to scan the camera UID from the sticker on the .QRCode Camera Cable
Press " " button and manually type "UID" according to the UID sticker on theAdd
.Camera Cable
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
Event Playback Add Camera Info
Camera
Add Camera
iPad 17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.103
iPad 17:50 63%
Place a barcode inside the
viewfinder rectangle to scan it.
Cancel Light
Enter the "Password". ( The default password is "admin". )
Assign a "Name" to the camera to help identify this camera if more than one camera
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
PHYLINK Bullet HD Quick Install Guide
Press on the Camera name from “ ” for "Live View" with a wired connection.Camera List
Press the "Back" button to go back to the “ ”.Camera List
Press to View saved pictures.
Press to take a snapshot.
Press to start listening or stop listening.
Live View
iPad 17:50 63%
Back
Camera
Online / LAN
768x432 / FPS: 16 / BPS: 154 Kbps
Press to start speaking or stop speaking.
PHYLINK Bullet HD Quick Install Guide
4.2 Wireless Setup on on iOS device
Option 1
Quick setup with Smartphone
Event Playback Add Camera Info
Camera
Camera List
iPad 17:50 63%
VNW5V15K6RY7J4VWC7W1
Edit
Connected
Camera
V5G5SX5U2TE71JBWC7W1
Connected
Camera
Edit Camera
iPad 17:50 63%
Back
Name Camera
Account admin
Password
Reconnect Connected
Security Code
Advanced Setting
Advanced Setting
iPad 17:50 63%
Back
Motion Detection
Video Quality
Alarm Recording
Microphone
Speaker Not available
Network Setup
Alarm Actions
Login Account
PHYLINK Bullet HD Quick Install Guide
There are two ways to setup the wireless connection.
Press on from the and go to the .Camera List Edit Camera
Go to > .Advanced Setting Network Setup
Network Setup
iPad 17:52 62%
Back
WiFi Networks
Data & Time
WiFi Networks
iPad 17:52 62%
Back
CHOOSE A NETWORK...
D-Link_DIR-612
TP-Link_245416
FAST_11DA2E
phr-002
Enter Password
iPad 17:52 62%
Cancel Join
Password
After a successful wireless setup, you can remove the network cable and the camera
should work through the wireless network after a short delay.
Press , then the App will search for available wireless networks,WiFi Networks
select your network among this list.
Type your Wi-Fi password and press the ” button to complete the Wi-Fi setup.“Join
PHYLINK Bullet HD Quick Install Guide
Andere Handbücher für PLC-325PW Bullet HD
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Phylink IP-Kamera Handbücher
Phylink
Phylink PLC-325PW Bullet HD Bedienungsanleitung
Phylink
Phylink PLC-325PW Bullet HD Bedienungsanleitung
Phylink
Phylink PLC-223W Bedienungsanleitung
Phylink
Phylink PLC-223W Bedienungsanleitung
Phylink
Phylink Bullet HD Bedienungsanleitung
Phylink
Phylink PLC-213W Bedienungsanleitung
Phylink
Phylink PLC-128PW Bedienungsanleitung
Phylink
Phylink Bullet Pro PLC-336PW Bedienungsanleitung
