Picote Soluons Oy Ltd 4www.picoteinstute.com
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL MACHINE SAFETY INFORMATION
1. Always wear eye and ear protecon as well as heat and cut-
resistant gloves.
Other personal protecve equipment, such as dust mask, gloves and
overalls should be worn when necessary. Dust produced when working
can be dangerous to your health, inammable or explosive. Always wear appropriate personal protecve
equipment.
2. Make sure the pipe has been opened and venlated to prevent any gases accumulang.
3. Always ensure that the machine is fully turned o and unplugged before inspecon, maintenance, or installing any
accessories to the machine. Always follow the instrucons in the manufacturer’s manual.
4. Before each use inspect the machine carefully for any potenal break or damage. Change damaged parts
immediately. It is especially important to check the end of the sha for any signs of wear and tear, and repeat the
process for the outer casing.
5. When in use, it is very important that the machine is stable and on an even surface at all mes.
6. Never leave the machine running unaended. Always hold the cable when operang the machine.
7. Do not touch the Cuer or Grinding Chains immediately aer use, they may be hot and could burn your skin.
8. If the working environment is extremely hot and humid, or badly polluted by conducve dust, use a GFCI-enabled
power outlet to ensure the safety of the operator.
9. Make sure that the job locaon is well venlated before grinding or drilling. Always use a vacuum extracon
system in the pipe to remove dust. The operator must wear a dust mask when using dry grinding to clean pipes.
10. Ensure that the venlaon openings are kept clear when working in dusty condions. If it should become neces-
sary to clear dust, rst unplug the machine. Avoid damaging internal parts.
11. Do not use the machine on any pipes containing asbestos bres.
12. Never touch rotang parts. Do not stand on the machine.
13. Only use this machine with the accessories and spare parts oered by the Picote Soluons. Accessories and spare
parts should only be used in the manner intended and as described by Picote Soluons.
14. Only operate the foot pedal or OPC as instructed. Never place anything on it in place of a foot.
15. Do not extend the sha by more than one extension. Use only Picote Soluons sha extension and connector.
Always read all safety warnings and instrucons. Failure to follow warnings and instrucons may result in electric
shock, re and/or serious injury. For resin please download the MSDS Sheets from the Picote Instute.
This secon contains important safety informaon. Failure to comply could result in serious injury or death.
