Pilz PNOZ m1p Bedienungsanleitung

PNOZ m1p (ETH)

Operating Manual-20878-EN-16

}Configurable safety systems PNOZmulti

Preface

This document is the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for the user's internal purposes. Suggestions and comments for improving this documenta-

tion will be gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PNOZ m1p (ETH)

20878-EN-16 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.2 Using the documentation 5

1.3 Definition of symbols 5

Section 2 Overview 7

2.1 Range 7

2.2 Unit features 7

2.3 Chip card 8

2.4 Front view 9

Section 3 Safety 11

3.1 Intended use 11

3.2 System requirements 11

3.3 Safety regulations 11

3.3.1 Safety assessment 11

3.3.2 Use of qualified personnel 12

3.3.3 Warranty and liability 12

3.3.4 Disposal 12

3.3.5 For your safety 12

Section 4 Function description 13

4.1 Integrated protection mechanisms 13

4.2 Functions 13

4.3 Block diagram 13

4.4 Diagnostics 14

4.5 Cascading 14

4.6 Safety mat, muting 14

4.7 Interfaces 14

Section 5 Installation 15

5.1 Control cabinet installation 15

5.2 Dimensions 16

5.3 Install base unit without expansion module 16

5.4 Connecting the base unit and expansion modules 17

Section 6 Commissioning 18

6.1 General wiring guidelines 18

6.2 Ethernet interfaces (ETH version only) 19

6.2.1 RJ45 interfaces ("Ethernet") 19

6.2.2 Requirements of the connection cable and connector 19

6.2.3 Interface configuration 19

6.2.4 RJ45 connection cable 20

6.2.5 Process data exchange 21

6.3 Function test during commissioning 21

6.4 Commissioning the PNOZmulti control system for the first time 22

6.4.1 Load project from chip card 22

Contents

Operating Manual PNOZ m1p (ETH)

20878-EN-16 4

6.4.2 Load project via integrated interface 22

6.5 Download modified project to the PNOZmulti system 23

6.5.1 Load modified project from chip card 23

6.5.2 Load modified project via integrated interface 23

6.6 Connection 23

6.7 Connection example 26

Section 7 Operation 27

7.1 LED indicators 27

7.1.1 Indicators for the Ethernet connection (ETH version only) 28

7.2 Function test of the relay outputs 28

7.3 Reset Ethernet connection settings 29

Section 8 Technical Details 30

8.1 Safety characteristic data 38

Section 9 Supplementary data 40

9.1 Service life graph for the relay contacts 40

Section 10 Order reference 42

10.1 Product 42

10.2 Accessories 42

Introduction

Operating Manual PNOZ m1p (ETH)

20878-EN-16 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PNOZ m1p. It is valid until new documentation

is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.2 Using the documentation

This document is intended for instruction. Only install and commission the product if you

have read and understood this document. The document should be retained for future ref-

erence.

1.3 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating Manual PNOZ m1p (ETH)

20878-EN-16 6

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PNOZ m1p (ETH)

20878-EN-16 7

2 Overview

2.1 Range

}Base unit PNOZ m1p

}Terminator

}Documentation on data medium

2.2 Unit features

Application of the product PNOZ m1p:

Base unit from the configurable control system PNOZmulti

The product has the following features:

}Can be configured in the PNOZmulti Configurator

}Positive-guided relay outputs:

– 2 safety outputs

Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of

EN IEC 62061

}Semiconductor outputs:

– 4 safety outputs

Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of

EN IEC 62061

– 1 output for standard applications

}4 test pulse outputs

}1 cascading input and output;

can also be used as a standard output

}20 inputs for connecting, for example:

– E-STOP pushbuttons

– Two-hand pushbuttons

– Safety gate limit switches

– Start buttons

– Light beam devices

– Scanners

– Enabling switches

– PSEN

– Operating mode selector switches

– Safety mats

}Muting function

Overview

Operating Manual PNOZ m1p (ETH)

20878-EN-16 8

}LED indicator for:

– Diagnostics

– Supply voltage

– Output circuits

– Input circuits

}Test pulse outputs used to monitor shorts across the inputs

}Monitoring of shorts between the safety outputs

}Expansion modules can be connected

(please refer to the document "PNOZmulti System Expansion" for details of the type

and number that can be connected)

}Integrated interfaces:

– PNOZ m1p: Serial interface RS232

– PNOZ m1pETH: 2 Ethernet interfaces

}Plug-in connection terminals:

Either spring-loaded terminal or screw terminal available as an accessory (see order

reference)

}Coated version:

Increased environmental requirements (see Technical details [ 30])

2.3 Chip card

To be able to use the product you will need a chip card.

Chip cards are available with memories of 8 kByte and 32 kByte. For large-scale projects

we recommend the 32 kByte chip card (see Technical Catalogue: Accessories chapter).

Overview

Operating Manual PNOZ m1p (ETH)

20878-EN-16 9

2.4 Front view

PNOZ m1p

CHIP-Card

Overview

Operating Manual PNOZ m1p (ETH)

20878-EN-16 10

PNOZ m1p ETH

CHIP-Card

TRF

LNK

TRF

LNK

MAC ADD_00-02-47-MAC-VAR

Legend:

CHIP card Chipkarte interface

X1 Cascading inputs and outputs CI and CO,

Test pulse outputs T0 ... T3

X2 Semiconductor outputs O0 ... O3,

Auxiliary output OA0,

Supply connections

X3 Relay outputs O4 and O5

X4 RS232 interface / Ethernet interface

X5, X6 Inputs I0 ... I19

X7 Power supply

LEDs: PWR

RUN

DIAG

FAULT

I FAULT

O FAULT

Andere Handbücher für PNOZ m1p

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pilz Sicherheitssensor Handbücher

Pilz

Pilz PSEN ma1.1p-12 Bedienungsanleitung

Pilz

Pilz PSEN 1.2p-20 Bedienungsanleitung

Pilz

Pilz PSEN ml s 1.1 Bedienungsanleitung

Pilz

Pilz PSEN 2.2p-21 Bedienungsanleitung

Pilz

Pilz PNOZ ml2p Bedienungsanleitung

Pilz

Pilz PSEN cs3.1a/b Bedienungsanleitung

Pilz

Pilz PSEN opII3F Series Bedienungsanleitung

Pilz

Pilz PSEN op2H Bedienungsanleitung

Pilz

Pilz PSEN ma2.1p-10 Bedienungsanleitung

Pilz

Pilz PSEN cs3.1a/b Bedienungsanleitung

Pilz

Pilz PSEN ma1.4-51 M12/8-0.15m Bedienungsanleitung

Pilz

Pilz PNOZ ml2p Bedienungsanleitung

Pilz

Pilz PSEN 2.1p-41 Bedienungsanleitung

Pilz

Pilz PSEN opII4HS-30-015 Bedienungsanleitung

Pilz

Pilz PSEN ml ba 1.1 Bedienungsanleitung

Pilz

Pilz PSEN cs1.1n Bedienungsanleitung

Pilz

Pilz PSEN 2.1p-21 Bedienungsanleitung

Pilz

Pilz PSEN 2.1p-20 Bedienungsanleitung

Pilz

Pilz PSENslock Series Bedienungsanleitung

Pilz

Pilz PSEN opII3H Series Bedienungsanleitung

Pilz

Pilz PSEN cs1.1n Bedienungsanleitung

Pilz

Pilz PSEN ml ba 1.1 Bedienungsanleitung

Pilz

Pilz PNOZ mmc2p Bedienungsanleitung

Pilz

Pilz PSEN cs2.2n Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung