Pin Genie PGD718 Bedienungsanleitung

Thank you for choosing our PIN Genie product.

Please read this manual carefully to ensure the Smart Lock is used safely and reliably.

You should keep it for future reference and maintenance.

U.S. Patent No. 9,665,706 & 9,853,815

Smart Lock by PIN Genie

User Manual

Smart Lock PRO (PGD728)

Smart Lock Essential (PGD718)

PGD718&728_Rev.A_20180118

Patented Anti-Peep PIN Pad

Random digits shown on the Pin Genie display keypad ensure passcodes

won't be detectable to intruders after repeated use. To experience the

pat

ented innovative PIN Genie Pad, please download our Vault APP from

Apple Store or Google Play.

Intruder prevention

Smart Lock PRO / Smart Lock Essential has a built-in audible alarm that

alerts you to any intrusion into your house. With the alarm mode on, our lock

reacts against any external physical shock and vibration. The owner will

immediately be notified with the intrusion.

Do not Disturb

The exterior displayed keypad can be locked and switched off using the

tailor-made design ON/OFF toggle button from inside. It can prevent others

trying to input the passcode from outside and go into the house.

Automatic lock

You no longer have to worry about forgetting to lock the door. With Auto

Lock enabled, Smart Lock PRO / Smart Lock Essential will automatically

relock the door 30 seconds after unlocking.

With back up keys and 9V battery emergency charging socket

The door can be opened via the back up keys. There is also a 9V battery

emergency charging socket for reactivating in case your Smart Lock runs

out of battery power.

IMPORTANT!

Your lock is built to highest quality standards, but if you ever experience any

issues when using our products, please stay calm and contact our customer

service team immediately at: [email protected] for consultation.

Our customer service officers are here to assist you.

To validate your warranty after purchase, please register this purchase

through our website: www.pin-genie.com for online registration. You will

receive an extra 3-months of extended warranty after completing the

registration.

Visit our website: www.pin-genie.com for more product information, installation

videos, updated user manuals and after sales supports.

PIN Genie Smart Lock PRO & Smart Lock Essential are keyless and equipped with the

patented innovative PIN Genie Pad, which is peep proof and hidden camera proof. It is

with a high security level that even when people watch you entering your PIN, they will

not be able to know it. PIN Genie Smart Lock makes your life safer and better.

About Smart Lock PRO & Smart Lock Essential

Contents

Section 1 Introduction of the smart lock

3.1 Factory Default Setting

3.2 Factory Reset

3.3 Display keypad switch

3.4 Reboot

3.5 PIN GENIE button

3.6 Changing the battery

3.7 Passcode information

3.8 How to enter settings

3.9 Add a Passcode

3.10 Delete a Passcode

3.11 View Passcodes

3.12 Alarm Sensitivity

4.1 Unlock from outdoor

4.1.1 Safe mode

4.2 Unlock & Lock from indoor

4.3 Lock from outdoor

Section 2 Installation Instruction

Section 4 Locking and unlocking the door

Section 3 Programming Passcode

Section 5 Safety Precautions

2.1 Getting Started

2.2 Adjust the backset of latch

2.3 Extend the bolt

2.4 Install latch

2.5 Prepare exterior assembly

2.6 Install exterior assembly

2.7 Install interior assembly

2.8 Install batteries

2.9 Install strike

2.10 Install battery cover

1.1 Product Overview

1.2 Exploded View

1.3 Components

1.4 Specifications

Section 1 Introduction of the smart lock

1.1 Product Overview

Battery Compartment

Restart Button

Lock Status icon

Bluetooth light-PGD728

Power Status

Bluetooth icon-PGD728

OK Button

Key Hole Cover

9V Battery Back

Up Socket

Front (Front Body）Back (Main Body）

Battery Cover

Key Hole

Display Keypad Switch

Thumbturn

PIN GENIE Button

Siren

Reset Button

Setting Switch

Program Button

D F G J K

Q R A

PQP

1.2 Exploded View

1.3 Components

Remarks : Your Smart Door Lock can be fitted for both right swing doors and

left swing doors.

Color: Satin Nickel, Venetian Bronze

Function: Single cylinder deadbolt

Door Prep: 2 1⁄8" diameter face hole & 1"diameter latch hole

Door Handing: Reversible

Door Thickness: 1 3⁄8" – 2"automatic adjustment

Backset: Adjustable 2 3⁄8" or 2 3⁄4"

Bolt: 1" throw, steel deadbolt

Latch: For 2 3⁄8" or 2 3⁄4" (steel or stainless steel)

Back-up Keys: 2 keys

Working environment temperature:Indoor use: 0~45°C，

Outdoor use: -25~60°C

Specifications

1.4 Specifications

Section 2 Installation Instruction

25mm

1/2"

12mm

* Drill hole

(Optional if you use EVA sticker)

* Drill hole

2-1/8"

54mm

3-109/127"(98mm)

2-3/8"(60mm) 2-3/4"(70mm)

1-3/8"—2" (35mm—50mm)

Hold the latch in front of the drilled hole as shown below.

2.1 Getting Started

2.2 Adjust the backset of latch

If drilling a new door, please use

the template supplied.

Note: The 1/2’’ hole is to stablize the smart lock. We strongly recommend you to have

this hole. However, if you are not willing to drill the extra hole on your door, we have

provided the 3M EVA sticker for backup. Please refer to the template that comes with

the package and also check out the videos on www.pin-genie.com.

Push toggle button "a"

downwards and pull part "b"

outwards.

Initial position of c: 2-3/8"

Pull "c" to 2-3/4"and release

button "a". Now the backset

has been adjusted to 2-3/4".

Adjust as shown below (only if needed)

31 2

2-3/8"

2-3/4"2-3/4"

2.3 Extend the bolt 2.4 Install latch

OP(2X)

If the latch holes are centered in the drilled

hole, no adjustment is needed.

If NOT, adjust the latch as shown below.

When installing the latch, make sure the

position of the "+" mark is on the bottom

part of the latch.

Extend the latch bolt as shown.

2.5 Prepare exterior assembly

2.6 Install exterior assembly

Vertical

Cable goes underneath the latch

When the bolt is extended, the

torque blade should be kept in

a vertical position.

When the bolt is extended, the torque blade

should be kept in a vertical position.

Install “D” & “C” on “B”

in order as shown.

This pole is for stabilizing your

lock while mounting on the door.

It is highly recommended to keep

it. However if you don’t want to

drill extra hole on your door,

simply loosen the pole by turning

it counter-clockwise and slide it

up through the open slot to

remove it. You may replace it

with the 3M EVA sticker provided

which serves the same purpose.

Note: Please use the backup

key to rotate the torque blade

in vertical position and then

pull out the key.

Make sure the cable is securely

fixed to the cable connector.

1 2

2.7 Install interior assembly

Unscrew the battery compartment

and then remove the cover.

Side hole

Center hole

Route cable through center hole, then push it into side hole.

I(2X)

Keep it in

upright position

Before screwing, check the vertical alignment

for the mounting plate and exterior

assembly.

After installation, use the back-up key to

test the latch. If the latch does not retract or

extend smoothly, adjust the screws to

ensure the latch system works smoothly.

Note: Do not install

batteries yet!

Connect the cable.

Make sure the thumbturn is in

its vertical position.

Please use the H1 screw for the

door with thickness of 35-43mm

whilst H2 screw for the door with

thickness of 43-50mm.

2.8 Install batteries 2.9 Install strike

Fix the interior assembly with

screws provided.

Push the thumbturn shaft onto the torque

blade.

torque blade thumbturn shaft

Install 4 new AA batteries. Make sure

batteries are correctly oriented.

P(2X) R

Before installing the last battery, press and hold

"Program" button until you finish, then you

will hear a short beep. Once you release the button,

the latch will automatically do a self-check and the

display keypad will play boot animation.

The self-check process is a very important step

to ensure your installation is done properly.

Double check if the thumturn key can be turned

smoothly after this self-check process. If not, go

through the whole installation process again

making sure all the steps are followed correctly.

Andere Handbücher für PGD718

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pin Genie Sperren Handbücher

Pin Genie

Pin Genie PGD718 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung