Pioneer QUANTUM INVERTER Series Service-Handbuch

QUANTUM INVERTER SERIES

(CYK-22 ONE-WAY CASSETTE)

DUCTLESS SINGLE-WAY CASSETTE INVERTER++ AIR CONDITIONER / HEAT PUMP SYSTEM

OWNER’S AND INSTALLATION MANUAL

Model Numbers Encompassed:

CYK009GMFILCAD

CYK012GMFILCAD

CYK018GMFILCAD

IMPORTANT NOTE:

Read this manual carefully before installing

or operating your new air conditioning system.

Make sure to save this manual for future reference.

Unit Specications and Features

Owner’s Manual

Safety Precautions

Care and Maintenance

Troubleshooting

1. Unit Parts

2. Operating temperature

3. Features

4. Energy Saving Tips

.......................................................................................................................................................08

.........................................................................................................................09

.........................................................................................................................................................10

................................................................................................................................11

............................................................................04...................................

........................................................08

...........................

.........................................................................12

............................

...................................................................................15

..............................

Installation Manual

........................................................................................17

........................................................................................19

....................................................................20

....................................................................................................................20

...........................................................................................................................22

.....................................................................................................................25

.................................................................27

....................................................................................................................27

......................................................................................................................................28

................................................................................................................................28

........................................................................31

...............................................................................................................31

........................................................33

..................................................................................................36

....................................................................................................................................40

................................................................................................42

....................................................................................................................................43

....................................................................................................................43

......................................................................................................................................43

.......................................................................................................................45

................................................................................................................................46

Accessories

Unit Parts

Indoor Unit Installation

1. Select installation location

2. Indoor Unit Installation

3. Optinal parts installation

Outdoor Unit Installation

1. Select installation location

2. Install drain joint

3. Anchor outdoor unit

Drainpipe Installation

Indoor Drainpipe Installation

Refrigerant Piping Connection

Electrical Connections

Air Evacuation

Electrical and Gas Leak Chechs

Panel Installation

1. Prepare and install ceiling

2. Panel Installation

3. Optinal parts installation

Test Run

...................................

 Page 4

Read Safety Precautions Before Operation and Installation

Incorrect installation due to ignoring instructions can cause serious damage or injury. The

seriousness of potential damage or injuries is classiﬁed as either a WARNING or CAUTION.

WARNING

• This appliance is not intended for use by persons(including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

Safety Precautions

This symbol indicates the possibility of

personnel injury or loss of life.

This symbol indicates the possibility of

property damage or serious consequences.

WARNING CAUTION

WARNINGS FOR PRODUCT USE

• If an abnormal situation arises (like a burning smell), immediately turn o the unit and

disconnect the power. Call your dealer for instructions to avoid electric shock, re or injury.

• Do not insert ngers, rods or other objects into the air inlet or outlet. This may cause injury,

since the fan may be rotating at high speeds.

• Do not use ammable sprays such as hair spray, lacquer or paint near the unit. This may cause

re or combustion.

• Do not operate the air conditioner in places near or around combustible gases. Emitted gas

may collect around the unit and cause explosion.

• Do not operate your air conditioner in a wet room such as a bathroom or laundry room. Too

much exposure to water can cause electrical components to short circuit.

• Do not expose your body directly to cool air for a prolonged period of time.

• Do not allow children to play with the air conditioner. Children must be supervised around

the unit at all times.

• If the air conditioner is used together with burners or other heating devices, thoroughly

ventilate the room to avoid oxygen deciency.

• In certain functional environments, such as kitchens, server rooms, etc., the use of specially

designed air-conditioning units is highly recommended.

• Toxic fumes may be produced if the refrigerant in this unit comes into contact with naked

ames (such as from a heater, gas stove/burners, or electric appliances).

Safety

Precautions

CLEANING AND MAINTENANCE WARNINGS

CAUTION

Safety

Precautions

WARNINGS FOR PRODUCT USE

 Page 5

• Dispose of this unit’s packaging carefully, so children cannot playwith it. Packaging, especially

plastic packaging, can be dangerous, can cause serious injury or death. Screws, staples and other

metal packaging components can be sharp and should be disposed of carefully to avoid injury.

• Do not open or remove the unit's panel when the unit is powered on. Touching the unit's

internal components while the unit is powered on can lead to electric shocks or injuries caused

by moving parts such as the unit's fan.

• Do not spray any liquids onto the unit or allow any liquids to drip onto the unit.

• The refrigerant in this unit is safe and should not leak if the system is designed and installed

properly. However, if a large amount of refrigerant leaks into a room, the oxygen concentration

will decrease rapidly, which can cause serious injury or death. The refrigerant used in this unit

is heavier than air, so the danger is greater in basements or other underground spaces. In the

event of a refrigerant leak, turn o any devices that produce a naked ame and any heating

devices, ventilate the room, and contact your supplier or service engineer immediately.

• Turn o the device and disconnect the power before cleaning. Failure to do so can cause

electrical shock.

• Do not clean the air conditioner with excessive amounts of water

• Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning

agents can cause re or deformation.

• Turn o the air conditioner and disconnect the power if you are not going to use it for a long time.

• Turn o and unplug the unit during storms.

• Make sure that water condensation can drain unhindered from the unit.

• Do not operate the air conditioner with wet hands. This may cause electric shock.

• Do not use device for any other purpose than its intended use.

• Do not climb onto or place objects on top of the outdoor unit.

• Do not allow the air conditioner to operate for long periods of time with doors or windows

open,or if the humidity is very high.

• Some parts of the unit are sharp and can cause injury if touched. To prevent injury, when the

unit is being serviced, gloves should be worn .

ELECTRICAL WARNINGS

• Only use the speciﬁed power cord. If the power cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.

TAKE NOTE OF FUSE SPECIFICATIONS

The air conditioner’s circuit board (PCB) is designed with a fuse to provide overcurrent protection.

The speciﬁcations of the fuse are printed on the circuit board ,examples of such are T5A/250VAC

and T10A/250VAC.

Safety

Precautions

 Page 6

ELECTRICAL WARNINGS

• Do not modify the length of the power supply cord or use an extension cord to power the unit.

• The product must be properly grounded at the time of installation, or electrical shock may occur.

• For all electrical work, follow all local and national wiring standards, regulations, and the

Installation Manual. Connect cables tightly, and clamp them securely to prevent external forces

from damaging the terminal. Improper electrical connections can overheat and cause re, and

mayalso cause shock. All electrical connections must be made according to the Electrical

Connection Diagram located on the panels of the indoor and outdoor units.

• All wiring must be properly arranged to ensure that the control board cover can close properly.

If the control board cover is not closed properly, it can lead to corrosion and cause the

connection points on the terminal to heat up, catch re, or cause electrical shock.

• Disconnection must be incorporated in the xed wiring in accordance with the wiring rules.

WARNINGS FOR PRODUCT INSTALLATION

• Installation must be performed by an authorized dealer or specialist. Defective installation can

cause water leakage, electrical shock, or re.

• Installation must be performed according to the installation instructions. Improper installation

can cause water leakage, electrical shock, or re.

(In North America,installation must be performed in accordance with the requirement of NEC

and CEC by authorized personnel only.)

• Contact an authorized service technician for repair or maintenance of this unit. This appliance

shall be installed in accordance with national wiring regulations.

• Only use the included accessories, parts, and specied parts for installation. Using non-standard

parts can cause water leakage, electrical shock, re, and can cause the unit to fail.

• Install the unit in a rm location that can support the unit’s weight. If the chosen location can

not support the unit’s weight, or the installation is not done properly, the unit may drop and

cause serious injury and damage

• Install drainage piping according to the instructions in this manual. Improper drainage may

cause water damage to your home and property

• For units that have an auxiliary electric heater, do not install the unit within 1 meter (3 feet) of

any combustible materials

• Do not install the unit in a location that may be exposed to combustible gas leaks. If

combustible gas accumulates around the unit, it may cause re.

• Do not turn on the power until all work has been completed.

 Page 7

ELECTRICAL WARNINGS

• When moving or relocating the air conditioner, consult experienced service technicians for

disconnection and reinstallation of the unit.

• How to install the appliance to its support, please read the information for details in "indoor

unit installation" and "outdoor unit installation" sections .

Safety

Precautions

 Page 8

Unit Specications and Features

NOTE: Illustrations in this manual are for explanatory purposes. The actual shape of your indoor

unit may be slightly dierent. The actual shape shall prevail.

Unit Parts

Unit Specications

and Features

Air Intake Grille

Air Filter

Air Vane

Display Panel

Air Outlet

Air Inlet

Electronic Control Box

“ ” when Electric heating feature is activated (Not available for this unit)

“ ” when TIMER is set.

“ ” when the unit is on.

“ ” Alarm indicator.

“ ” when Wireless Control feature is activated(some units)

“ ” when pre-heating/defrost feature is activated.

 Page 9

The display panel has one type and the appearance of the type is shown in below.

Display panel

Operating temperature

When your air conditioner is used outside of the following temperature ranges, certain safety

protection features may activate and cause the unit to disable.

COOL mode HEAT mode DRY mode

Room Temperature 16°C - 32°C

(61°F - 90°F)

0°C - 30°C

(32°F - 86°F)

10°C - 32°C

(50°F - 90°F)

Outdoor

Temperature

-25°C - 24°C

(-13°F - 75°F)

0°C - 50°C

(32°F - 122°F)

-25°C - 50°C

(-13°F - 122°F)

FOR OUTDOOR UNITS

WITH AUXILIARY

ELECTRIC HEATER

Inverter Split Type

When outside

temperature is below 0°C

(32°F ), we strongly

recommend keeping the

unit plugged in at all

time to ensure smooth

ongoing performance.

Unit Specications

and Features

NOTICENOTICE

Displays temperature, operation feature and Error codes:

“ ”

“ ” when Active Clean feature is turned on

“ ” when WiFi module enters AP mode(some units)

“ ” when Forced cooling feature is turned on

“ ” when 8℃heating feature is turned on

Room relative humidity less than 80%. If the air conditioner operates in excess of this gure,

the surface of the air conditioner may attract condensation. Please sets the vertical air ow

louver to its maximum angle (vertically to the oor), and set HIGH fan mode.

 Page 10

• Keep doors and windows closed.

• Limit energy usage by using TIMER ON and TIMER OFF functions.

• Do not block air inlets or outlets.

• Regularly inspect and clean air lters.

To further optimize the performance of your unit, do the following:

Features

Unit Specications

and Features

Default Setting

When the air conditioner restarts after a power

failure, it will default to the factory settings

(AUTO mode, AUTO fan, 24°C (76°F)). This

may cause inconsistencies on the remote

control and unit panel. Use your remote

control to update the status.

Auto-Restart

In case of power failure, the system will

immediately stop. When power returns, the

Operation light on the indoor unit will ﬂash. To

restart the unit, press the ON/OFF button on

the remote control. If the system has an auto

restart function, the unit will restart using the

same settings.

Louver Angle Memory Function

Some models are designed with a louver angle

memory function. When the unit restarts after

a power failure, the angle of the horizontal

louvers will automatically return to the previous

position.

The angle of the horizontal louver should not

be set too small as condensation may form and

drip into the machine. To reset the louver, press

the manual button, which will reset the

horizontal louver settings.

Refrigerant Leak Detection System

(Multi-Zone Systems models do not have this

function)

In the event of a refrigerant leak, the LED

DISPLAY will display refrigerant leak error code

and the LED indicator light will ﬂash.

Three-minute protection feature

A protection feature prevents the air

conditioner from being activated for

approximately 3 minutes when it restarts

immediately after operation.

The SLEEP function is used to decrease energy

use while you sleep (and don’t need the same

temperature settings to stay comfortable). This

function can only be activated via remote control.

And the Sleep function is not available in FAN or

DRY mode.

Press the SLEEP button when you are ready to

go to sleep. When in COOL mode, the unit will

increase the temperature by 1°C (2°F) after 1 hour,

and will increase an additional 1°C (2°F) after

another hour.

When in HEAT mode, the unit will decrease the

temperature by 1°C (2°F) after 1 hour, and will

decrease an additional 1°C (2°F)after another hour.

Set

temperature

1hr 1hr

Keep

running

SLEEP Operation

Saving energy during sleep

Heat mode( -1 C/2 F) per hour

for the rst two hours

Cool mode(+1 C/2 F) per hour

for the rst two hours

The sleep feature will stop after 8 hours and the

system will keep running with nal situation.

Sleep Operation

Andere Handbücher für QUANTUM INVERTER Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Klimaanlage Handbücher

Pioneer

Pioneer WYN011-I Handbuch

Pioneer

Pioneer IKT-UVL32UL-AG Bedienungsanleitung

Pioneer

Pioneer WYD-GLFI SERIES Bedienungsanleitung

Pioneer

Pioneer Inverter+ WAS Series Bedienungsanleitung

Pioneer

Pioneer FB009 Bedienungsanleitung

Pioneer

Pioneer WYT012GLFI22RL Bedienungsanleitung

Pioneer

Pioneer YN020GMFI22M2D Bedienungsanleitung

Pioneer

Pioneer CYK009GMFILCAD-10 Bedienungsanleitung

Pioneer

Pioneer PYR009AZFRVBKE Bedienungsanleitung

Pioneer

Pioneer WAE012AMFI15RL Bedienungsanleitung

Pioneer

Pioneer CB009 Bedienungsanleitung

Pioneer

Pioneer YH024GHFI18RT2 Bedienungsanleitung

Pioneer

Pioneer FYB018GMFILCAD Service-Handbuch

Pioneer

Pioneer WYT Inverter Series Bedienungsanleitung

Pioneer

Pioneer FB012 Bedienungsanleitung

Pioneer

Pioneer YN-M Series Bedienungsanleitung

Pioneer

Pioneer CYB Series Bedienungsanleitung

Pioneer

Pioneer RAB Series Bedienungsanleitung

Pioneer

Pioneer YN-M Series Bedienungsanleitung

Pioneer

Pioneer YH1824GHFD18RT2 Bedienungsanleitung

Pioneer

Pioneer KFDH075UW Bedienungsanleitung

Pioneer

Pioneer UB018 Bedienungsanleitung

Pioneer

Pioneer WAS Series Bedienungsanleitung

Pioneer

Pioneer Blade HPR-09A2 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung