Pioneer BDP-LX70 Bedienungsanleitung

Andere Handbücher für BDP-LX70

Inhaltsverzeichnis

Andere Pioneer Blu-ray-Player Handbücher

Pioneer

Pioneer ELITE Blu-ray Disc BDP-85FD Bedienungsanleitung

Pioneer

Pioneer BDP-23FD - Elite Blu-Ray Disc Player Bedienungsanleitung

Pioneer

Pioneer BDP-LX70A Bedienungsanleitung

Pioneer

Pioneer BDP-3130 Bedienungsanleitung

Pioneer

Pioneer BDP-120 Bedienungsanleitung

Pioneer

Pioneer BDP-53FD Bedienungsanleitung

Pioneer

Pioneer BDP-23FD - Elite Blu-Ray Disc Player Bedienungsanleitung

Pioneer

Pioneer Elite BDP-33FD Bedienungsanleitung

Pioneer

Pioneer BDP-140 Bedienungsanleitung

Pioneer

Pioneer BDP-09FD - Elite Blu-Ray Disc Player Bedienungsanleitung

Pioneer

Pioneer Elite BDP-HD1 Bedienungsanleitung

Pioneer

Pioneer BDP-95FD Bedienungsanleitung

Pioneer

Pioneer BDP-LX55 Bedienungsanleitung

Pioneer

Pioneer BDP-430 Bedienungsanleitung

Pioneer

Pioneer BDP-LX91 Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer BDP-450 Bedienungsanleitung

Pioneer

Pioneer BDP-05FD - Elite Blu-Ray Disc Player Bedienungsanleitung

Pioneer

Pioneer BDP-3140 Bedienungsanleitung

Pioneer

Pioneer BonusView BDP-LX71 Bedienungsanleitung

Pioneer

Pioneer BDP-160 Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer BDP-3120 Bedienungsanleitung

Pioneer

Pioneer BDP-05FD - Elite Blu-Ray Disc Player Bedienungsanleitung

Pioneer

Pioneer BDP-LX 70 Bedienungsanleitung

Pioneer

Pioneer BDP-LX70A Gebrauchs- und Pflegehandbuch

Beliebte Blu-ray-Player Handbücher anderer Marken

Samsung

Samsung BD-F5900 Bedienungsanleitung

Philips

Philips BDP3380K Bedienungsanleitung

Samsung

Samsung BD-P4600 Bedienungsanleitung

Sharp

Sharp BD-HP17U - AQUOS 1080p Blu-ray DiscTM Player Bedienungsanleitung

LG HLX50W Bedienungsanleitung

Sony

Sony BDP-S300 - Blu-Ray Disc Player Bedienungsanleitung

Marantz

Marantz UD9004 Bedienungsanleitung

Panasonic

Panasonic DMR-HCT230 Bedienungsanleitung

LG BD611 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-PWT420 Bedienungsanleitung

LG BD611 Bedienungsanleitung

Marantz

Marantz BD7004 Kurzanleitung

Kogan

Kogan KABRP3DWFIA Bedienungsanleitung

Toshiba

Toshiba BDX2700 Bedienungsanleitung

Samsung

Samsung BD-E5400 Bedienungsanleitung

Samsung

Samsung BD-F5100 Bedienungsanleitung

Philips

Philips BDP7100 Bedienungsanleitung

LG UBK80.DUSALLK Bedienungsanleitung

Operating Instructions

Blu-ray Disc PLAYER

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly.

After you have finished reading the instructions, put them away in a safe place for future reference.

VENTILATION CAUTION

When installing this unit, make sure to leave

space around the unit for ventilation to improve

heat radiation (at least 10 cm at top, 10 cm at

rear, and 10 cm at each side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the

product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as

newspapers, table-cloths, curtains) or by

operating the equipment on thick carpet or a bed.

D3-4-2-1-7b_A_En

WARNING

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

equipment.

D3-4-2-1-7a_A_En

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture. D3-4-2-1-3_A_En

CAUTION

The STANDBY/ON switch on this unit will not

completely shut off all power from the AC outlet.

Since the power cord serves as the main disconnect

device for the unit, you will need to unplug it from

the AC outlet to shut down all power. Therefore,

make sure the unit has been installed so that the

power cord can be easily unplugged from the AC

outlet in case of an accident. To avoid fire hazard,

the power cord should also be unplugged from the

AC outlet when left unused for a long period of time

(for example, when on vacation).

D3-4-2-2-2a_A_En

Operating Environment

Operating environment temperature and humidity:

+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light) D3-4-2-1-7c_A_En

WARNING

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230 V

or 120 V) written on the rear panel. D3-4-2-1-4_A_En

Before plugging in for the first time, read the following

section carefully.

CAUTION

This product is a class 1 laser product, but this

product contains a laser diode higher than Class 1.

To ensure continued safety, do not remove any covers

or attempt to gain access to the inside of the product.

Refer all servicing to qualified personnel.

D3-4-2-1-8_B_En

The following caution label appears on your unit.

Location: inside of the unit

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

This product complies with the Low Voltage Directive

(73/23/EEC, amended by 93/68/EEC), EMC Directives

(89/336/EEC, amended by 92/31/EEC and

93/68/EEC).

D3-4-2-1-9a_En

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be performed only by qualified

service personnel. If connected to an AC outlet, the

cut-off plug can cause severe electrical shock. Make

sure it is properly disposed of after removal.

The equipment should be disconnected by removing

the mains plug from the wall socket when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-1a_A_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which

requires repair will be charged for even during the

warranty period. K041_En

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified

service personnel.

D3-4-2-1-2-2_B_En

IMPORTANT: THE MOULDED PLUG

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Should the

fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug

must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.

If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of

safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

Blue : Neutral Brown : Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in

your plug, proceed as follows ;

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter Nor coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the

letter Lor coloured RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058_A_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement.

S002_En

For U.K model:

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Contents

01 Before you start

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . 6

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Disc/content format playback compatibility . . . . . . . . . . . . . . . . . 6

File compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Titles and chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DVD-Video regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

BD-ROM regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

02 Connecting up

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Easy connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using other types of video output. . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting for HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting using the component video output . . . . . . . . . . . . . 12

Changing the output video resolution . . . . . . . . . . . . . . . . . . . . 12

Connecting using an S-Video output . . . . . . . . . . . . . . . . . . . . . 13

Connecting for surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 13

Network connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Controlling this player via another Pioneer component . . . . . . . 14

Using an external IR receiver with this player. . . . . . . . . . . . . . . 14

03 Controls and displays

Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front panel display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

04 Getting Started

Switching on and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the on-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting up for network use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Playing movies, music and photos. . . . . . . . . . . . . . . . . . . . . . . 20

Playing BD/DVD movies and audio CD . . . . . . . . . . . . . . . . . . . 20

Playback controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

05 Using the Disc Navigator

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

06 Using the Home Media Gallery

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . . . . .31

Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

About Windows Media Connect . . . . . . . . . . . . . . . . . . . . . . . . .36

07 Video/Audio Adjust menu

Video Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Audio Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

08 Initial Setup menu

Using the Initial Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .39

About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . .42

Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

09 Additional information

Taking care of your player and discs . . . . . . . . . . . . . . . . . . . . . .44

Screen sizes and disc formats. . . . . . . . . . . . . . . . . . . . . . . . . . .45

Resetting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting up the remote to control your TV . . . . . . . . . . . . . . . . . . .45

TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

BD/DVD language code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

BD/DVD country/area code list . . . . . . . . . . . . . . . . . . . . . . . . . .47

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Before you start01

Movie file playback

Video files encoded in the WMV (Windows Media* Video), MPEG-1/2

formats are playable from DVD-R/-RW, or from a connected media

server.

Music file playback

This player supports various audio formats, including WMA

(Windows Media* Audio), MP3 and WAV. You can play files stored

on DVD-R/-RW, or from a connected media server.

Photo file playback

PNG, GIF and JPEG image files — including the popular EXIF format

used by most digital cameras to store picture shooting information

together with the JPEG image — are playable from DVD-R/-RW, or

from a connected media server.

What’s in the box

Please confirm that the following accessories are in the box along

with these operating instructions when you open it:

•Remotecontrol

• AA/R6P dry cell batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

•HDMIcable

•LANcable

•Powercable

• Warranty card

Putting the batteries in the remote

control

• Insert two AA/R6P batteries into the battery compartment

following the indications ( ,) inside the compartment.

Important

Incorrect use of batteries can result in hazards such as leakage and

bursting. Please observe the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of batteries together — although they

may look similar, different batteries may have different voltages.

• Make sure that the plus and minus ends of each battery match

the indications in the battery compartment.

• Remove batteries from equipment that isn’t going to be used for

a month or more.

• When disposing of used batteries, please comply with

governmental regulations or environmental public instruction’s

rules that apply in your country/area.

Using the remote control

Please keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote and

the remote sensor on the unit.

• The remote has a range of about 7 m (at an angle of 30º from

either side of the sensor). Use within this range in front of the

remote control sensor on the front panel.

• Remote operation may become unreliable if strong sunlight or

fluorescent light is shining on the unit’s remote sensor.

• Remote controllers for different devices can interfere with each

other. Avoid using remotes for other equipment located close to

this unit.

• Replace the batteries when you notice a fall off in the operating

range of the remote.

• When the batteries run down or you change the batteries, the TV

preset codes are automatically reset. See on

page 45 to reset them.

Disc/content format playback

compatibility

General disc compatibility

This player is compatible with a range of disc types (media) and

formats. Compatible discs will usually feature one of the following

logos on the disc and/or disc packaging. Note however that some

disc types, such as recordable BD, DVD or CD, may be in an

unplayable format — see below for further compatibility

information.

•

Do not use o sto e batte ies in di ect sunlight o

othe excessively hot lace, such as inside a ca o

nea a heate . This can cause batte ies to leak,

ove heat, ex lode o catch fi e. It can also educe the

life o e fo mance of batte ies.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

File extensions

The following file extensions should be used with this player:

•Video

.wmv .mpg .mpeg

•Audio

.wma .mp3 .wav

•Image

.jpg .jpeg .png .gif

Even when files have a supported file extension, some files may not

play or display depending on the content or media server type.

Titles and chapters

BD and DVD movie discs are divided into one or more titles. Titles

may be further subdivided into chapters.

DVD-Video regions

All commercially produced DVD movies (DVD-Video discs) carry a

region mark on the case somewhere that indicates which region(s)

of the world the disc is compatible with. This player also has a region

mark, which you can find on the rear panel. Discs from incompatible

regions will not play in this player. Discs marked ALL will play in any

player.

The diagram below shows the various DVD regions of the world.

This player is REGION 2.

BD-ROM regions

Like DVD movies, BD movie discs (BD-ROM) also carry a region

mark that indicates which region(s) of the world the disc is

compatible with. This player also has a region mark, which you can

find on the rear panel. Discs from incompatible regions will not play

in this player. Discs marked ALL will play in any player.

The diagram below shows the various BD-ROM regions of the world.

This player is REGION B.

Title 1 Title 2 Title 3

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2

REGION A

REGION B

REGION C

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up02

Easy connections

This is a basic setup that allows you to watch discs on your TV using

just the cables supplied.

Important

• This player is equipped with copy protection technology. Do not

connect this player to your TV via a VCR using AV cables, as the

picture from this player will not appear properly on your TV. (This

player may also not be compatible with some combination TV/

VCRs for the same reason; refer to the manufacturer for more

information.)

• Do not unplug the player from the power outlet while it is

switched on.

• Do not plug this player into a switched power supply found on

some amplifiers and AV receivers.

1 Connect the VIDEO OUT and one pair of AUDIO OUT jacks

to a set of audio/video inputs on your TV.

Use the supplied red/white stereo audio and yellow video cables.

Make sure you match up the left and right audio outputs with their

corresponding inputs for correct stereo sound.

See below if you want to use a

different type of connection.

2 Connect the supplied AC power cord to the AC IN inlet,

then plug into a power outlet.

Using other types of video output

This player has standard (composite), S-Video and component video

outputs, as well as an HDMI connector (for digital video/audio).

In order to be able to watch HD (high definition) BDs at their full

resolution, you should connect the player to your TV using either the

component video output, or (even better) the HDMI output.

An HDMI connection will additionally give you HD output when

watching DVDs.

If your display has neither of these connection types, an S-Video jack

is also provided, which should give slightly better video quality than

using the standard video output.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up02

Connecting using the component

video output

You can use the component video output instead of the standard

video out jack to connect this player to your TV (or other equipment).

• Use a component video cable (not supplied) to connect the

COMPONENT VIDEO OUT jacks to a component video input on

your TV, monitor or AV receiver.

Be careful to match up the colours of the three jacks for correct

connection.

Changing the output video resolution

Use the OUTPUT RESOLUTION button located on both the front

panel and the remote control to switch the output video resolution

for the HDMI and component video outputs.

The table below shows the output settings.

Note

• Depending on your display, some of the settings may result in

the picture disappearing. In this case, press OUTPUT

RESOLUTION repeatedly until the picture re-appears.

• 720/50p, 1080/50i, 1080/50p, 1080/60p and 1080/24p output is

only compatible with HDMI displays. They are not compatible

with the component video output.

•When is set to 720p, 1080i or 1080p,

video is output in 16:9 format even if is set to 4:3

(Standard). See on page 39.

• If the contours of the displayed subjects look jagged or blurred,

try setting the Output Video Resolution to 576i/480i. (If you

connected this player to your TV with the HDMI connection and

the picture disappears when you switch the Output Video

Resolution to 576i/480i, use the component connection with the

576i/480i Output Video Resolution or S-Video, the standard

composite connection instead.)

• Note that when using a Component Video connection with a TV

or other AV component ( using HDMI), 480/60i video may be

output in 480/60p, and 576/50i video may be output in 576/50p.

24p output

For smooth presentation of 1080/24p or 720/24p video with an

HDMI-equipped display compatible with 1080/24p input, set

on this player to On (see page 39).

This player will output 1080/24p video over HDMI in the following

cases:

• 1080/24p video: When the Output Video Resolution is set to

Auto or Source Direct.

• 720/24p video: When the Output Video Resolution is set to Auto.

Note

• Even when is set to On, if a TV not compatible with

1080/24p video is connected, the actual frame frequency of the

video output will be 60 Hz.

• The video output will be interrupted when switching the video

output from 1080/24p or 720/24p to other output video

resolutions, or when switching to 1080/24p or 720/24p from

other output video resolutions.

Setting TV

system HDMI output Component

output

Video/S-Video

output

AUTO PAL

NTSC

576/50i

480/60i

576i or

480i

PAL

NTSC

576/50i

480/60i

576/50i

480/60i

576/50i

480/60i

576p or

480p

PAL

NTSC

576/50p

480/60p

576/50p

480/60p

576/50i

480/60i

720p PAL

NTSC

720/50p

720/60p

576/50i

720/60p

576/50i

480/60i

1080i PAL

NTSC

1080/50i

1080/60i

576/50i

1080/60i

576/50i

480/60i

1080p PAL

NTSC

1080/50p

1080/60p

576/50i

480/60i

576/50i

480/60i

Source

Direct

PAL

NTSC

576/50i

480/60i

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up02

Network connection

This player can be connected to a local area network (LAN) via the

Ethernet port on the rear panel.

After making the physical connection the player needs to be set up

for network communication. This is done from the Initial Setup

menu — see on page 19 for detailed

instructions.

For best performance, we recommend using a 100BASE-TX

compatible PC and Ethernet hub.

Connecting via an Ethernet hub

If you already operate one or more PCs on a local area network, you

can integrate this player by connecting it to the Ethernet hub using

the included LAN cable.

In the example configuration below, this player would be able to

access content from either of the PCs.

Connecting directly to a PC

If you only need to use one PC to act as a media server, you can

connect this player directly to the PC using the included LAN cable.

Controlling this player via another

Pioneer component

The CONTROL IN jack allows you to control this player via the

remote control sensor of another Pioneer component — typically an

AV receiver — that has a CONTROL OUT jack. Remote control

signals are passed through to the player from the remote sensor of

the other component, allowing you greater freedom in the

placement of your player.

• Use a miniplug cord (not supplied) to connect the CONTROL

IN jack of this player with the CONTROL OUT jack of your other

Pioneer component.

• You will also need to connect a coaxial digital cable, analog

audio cable, or video cable.

• When connected via System Control, point the remote control

toward the connected component (such as an AV receiver). The

remote will not work correctly when pointed at this unit.

• You cannot connect use System Control with components that

do not have a System Control jack or with components

manufactured by companies other than Pioneer.

Using an external IR receiver with this

player

If you prefer to keep your AV equipment in a closed cabinet, you can

use an external IR receiver connected to the IR IN jack. You can thus

have just the receiver outside of the cabinet and still be able to

control the player.

Tip

• You may need to set the IR RECEIVER switch (located under the

IR IN jack) for this player to recognize the IR receiver correctly.

• This player does not supply power to the external IR receiver.

Please see the operating instructions of the IR receiver for the

power requirements.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Controls and displays03

Remote control

1STANDBY/ON

Press to switch the player on or into standby.

2OPEN/CLOSE

Press to open or close the disc tray.

3 FL DIMMER

Press to change the brightness of the display. When the display and

other indicators are off, the FL OFF indicator (see page 15) lights.

4 Number buttons

Use to enter title, chapter or track numbers, etc.

CLEAR: Press to clear a numeric entry, etc.

ENTER: Press to select an option or execute a command.

5 HOME MEDIA GALLERY

Press to display the Home Media Gallery screen (see page 30).

6 OUTPUT RESOLUTION

Press to switch the output resolution over HDMI and component

video outputs (see page 12 and page 23).

7 AUDIO

Press to select the audio channel or language (see page 23).

8 SUBTITLE

Press to select a subtitle display (see page 23).

9 DISPLAY

Press to display information (see page 23).

10 ANGLE

Press to change the camera angle during BD-ROM or DVD-Video

movie multi-angle scene playback (see page 23).

11 DISC NAVIGATOR/TOP MENU

Press to display the top menu of a BD-ROM or DVD-Video disc.

When playing a DVD-R/-RW disc, press to display/exit the Disc

Navigator.

12 POPUP MENU/MENU

BD-ROM: Press to display/hide the pop-up menu.

DVD-Video: Press to display the disc menu (if there is one).

13 and ENTER

Use to navigate on-screen displays and menus. Press ENTER to

select an option or execute a command.

14 HOME MENU

Press to display the player’s Home Menu, from which you can

access most of the player’s functions.

15 RETURN

Press to return to a previous screen.

16 RED/GREEN/YELOW/BLUE

Use to navigate BD-ROM menus.

17 Playback controls

/: Press to start reverse/forward scanning.

: Press to start or resume playback.

: Press to pause playback; press again to restart.

: Press to stop playback (you can resume playback by

pressing ).

: Press to jump to the start of the previous/next

chapter/track.

: Use for slow motion and step frame (see

page 22).

18 PLAY MODE

Press to change the Play Mode (repeat play, for example) (see

page 22).

19 PHOTO ZOOM

Press to zoom the screen when displaying a still image (see

page 23).

20 VIDEO ADJUST

Press to display the Video Adjust screen (see page 37).

21 TV CONTROL buttons

See also on page 45.

: Press to turn the TV on or into standby.

VOLUME +/–: Use to adjust the volume.

CHANNEL +/–: Use to select TV channel.

INPUT SELECT: Press to change the input function of the TV.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Getting Started04

Chapter 4

Getting Started

Switching on and setting up

When you switch the player on for the first time the Setup Navigator

screen appears. We recommend using this to make a few basic

player settings.

1 Switch on your TV and set the video input to this player.

2 Press the STANDBY/ON button on the remote control or

the front panel to switch on.

• It can take up to one minute for the unit to turn on.

• When you switch on for the first time, your TV should display the

Setup Navigator screen. (If the Setup Navigator doesn’t appear,

you can also access it from the Initial Setup menu; see page 41).

• When you have this unit connected to a plasma television that is

compatible with HDMI Control, language settings are imported

from the plasma television’s OSD settings before Setup

Navigator begins.

3Usethe buttons to choose a language, then press

ENTER.

4 Press ENTER to start setting up using the Setup Navigator.

If you don’t want to use the Setup Navigator, press to select

Cancel, then press ENTER to exit the Setup Navigator.

5Usethe buttons to select the output video resolution

then press ENTER.

If you connected this player to your TV using the HDMI connector,

select from Auto, 576i/480i (interlaced), 576p/480p (progressive),

720p, 1080i, 1080p, or Source Direct, then skip to step 7(the

aspect ratio will automatically be set to 16:9 (Widescreen)).

Generally, the Auto setting is recommended.

If you’re using an S-Video or composite video connection, select

S-Video/Video only.

If you’re using a component video connection, match the output

setting with the capabilities of your TV. Select from: 576i/480i,

576p/480p, 720p, 1080i or Don’t Know. If you select 720p or

1080i, skip the next step since the aspect ratio will automatically be

set to 16:9 (Widescreen).

6Usethe buttons to select the aspect ratio of your TV

then press ENTER.

If you have a widescreen TV, select 16:9 (Widescreen); if you have a

standard size TV, select 4:3 (Standard).

7 Select ‘Finish Setup’ to accept the settings and exit the

Setup Navigator, or ‘Go Back’ to go through the settings again.

You can run the Setup Navigator at any time by selecting it from the

Options menu — see page 41.

Language

English

français

Deutsch

Italiano

Español

Befo e using, make some sim le

settings fo the BD laye .

Sta t

Cancel

Please use the Initial Setu if you

want to make mo e detailed settings.

Auto

576i/480i

576p/480p

720p

1080i

1080p

Source Direct

Output Video

Resolution

S-Video/Video only

576i/480i

576p/480p

720p

1080i

Don't Know

Output Video Resolution

16:9 (Widesc een)

4:3 (Standa d)

TV As ect Ratio

Finish Setu

Go Back

Setu is com lete!

Enjoy using you BD laye !

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Getting Started04

Playing movies, music and photos

Using this player, you can enjoy watching movies, listening to music

and browsing photos, from BD and DVD discs or from a media

server on the network. How you navigate, browse and play content

varies according to the format of the content and the media:

• To play a BD or DVD movie disc (i.e., one containing BD-ROM or

DVD-Video application format), see

below.

• To play a DVD-R/-RW disc recorded with movie, music or photo

files, turn to on page 25.

• To play content from a media server, please refer to

on page 30.

Playing BD/DVD movies and audio CD

The basic playback controls for playing BD/DVD movies and audio

CD discs are covered here. Further functions are detailed in the next

chapter.

1 If the player isn’t already on, press STANDBY/ON to

switch it on.

Also turn on your TV and make sure that it is set to the correct video

input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide

to align the disc (if you’re loading a double-sided DVD-Video disc,

load it with the side you want to play face down).

The player will take a short while to read the disc, after which the

disc type will show up in the front panel display.

4 Press to start playback.

•Usethe PAUSE and buttons to pause or stop playback. You

can resume playback in either case by pressing . See also

on page 21.

• See on page 21 for other controls available

during playback.

• Commercially produced BD-ROM movie discs often go straight

to the disc menu when playback is started (sometimes preceded

by an opening sequence). Navigate through the disc menu

using the cursor keys ( ) and the ENTER button. You

can also use the number buttons to select numbered items in

some menus.

• To get back to the top menu, press TOP MENU.

• Some BD-ROM discs feature pop-up menus that do not

interrupt playback; press POPUP MENU/MENU to access

these.

• Commercially produced DVD movies often go straight to the

disc menu when playback is started (sometimes preceded by an

opening sequence). Navigate the disc menu using the cursor

() and ENTER buttons. You can also use the number

buttons to select numbered items in some menus.

• To get back to the top menu, press TOP MENU.

• To get back to the disc menu, press POPUP MENU/MENU.

• For more information see on page 21.

5 When you’ve finished using the player, eject the disc and

switch the player back into standby.

• To open/close the disc tray, press OPEN/CLOSE. Remove the

disc before putting the player into standby.

• Press STANDBY/ON to switch the player into standby.

About NTSC/PAL TV systems

The TV system setting is set to PAL when you turn the player on.

When video output in NTSC is played back, the TV system setting is

automatically changed. When video is stopped, playback is

resumed with video output in the last format used.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Getting Started04

Playing video in slow motion

You can play BD and DVD movies and movie files at different

forward slow motion speeds.1

1 During playback, press to start slow motion playback.

• The slow motion speed is shown on-screen.

• There is no sound during slow motion playback.

2 Press repeatedly to change the slow motion speed.

3 To resume normal playback, press .

Depending on the disc, normal playback may automatically resume

when a new chapter is reached.

Video step forward and step reverse

You can use step forward and step reverse when playing a BD or

DVD movie or movie files.1, 2

1 During playback, press PAUSE.

2 Press or to move the video forward or back one step.

3 To resume normal playback, press .

When playing a BD or DVD movie, normal playback may

automatically resume when a new chapter is reached.

Changing the Play Mode

Use the PLAY MODE button on the remote control to select one of

the various playback modes for BD and DVD movie discs, audio CD

discs, movie and music files and photo slideshows.

You can’t select a Play Mode while a BD or DVD disc menu is being

displayed, or while playing some BD/DVD movie titles, audio CD, or

movie and music files and photo slideshows.

• During playback, press PLAY MODE to change the Play

Mode.

See below for the options available

with the disc/file you’re playing.

•Time Search (see below)

•Title Search (see below)

•Repeat Chapter (repeats the current chapter)

•Repeat Title (repeats the current title)

•Repeat Track (repeats the current track)

•Repeat All (repeats the current browse list)

•Random (play tracks from an audio CD, music files, or

photo files in a random order)

•Repeat Off (cancels the repeat and random modes)

The current Play Mode is displayed on-screen. Press CLEAR to

resume normal playback.

Play Mode option compatibility

The available options depend on what kind of disc/file is playing

(=available / =unavailable):3

Using time search

You can navigate directly to a certain point in a BD or DVD movie, or

in a movie file.1,3

1 During playback, press PLAY MODE and select ‘Time

Search’.

2 Use the number buttons to enter a time in hours, minutes

and seconds for playback to resume from.

For a BD or DVD movie, the time you enter should be the time into

the currently playing title. For a movie file it will be the playback time

into the file.

• For example, press 4, 5, 0, 0to have playback start from 45

minutes into the title/file. For 1 hour, 20 minutes, press 1, 2, 0,

0, 0.

• Press CLEAR to clear the input.

3 Press ENTER to start playback from the time you entered.

Using title search

You can directly jump to the start of any title on a BD-ROM or

DVD-Video.1,3

1 During playback, press PLAY MODE and select ‘Title

Search’.

2 Use the number buttons to select a title.

Press CLEAR to clear the input.

3 Press ENTER to start playback of the title you selected.

Note

1 This function may not be supported depending on the content or server software.

2 You cannot use step reverse with movie files.

Play Mode

Option

Disc / file type

BD-ROM

DVD-

VIDEO PC File

(Music)

PC File

(Movie)

PC File

(Photo) Audio

Time Search

Title Search

Repeat Chapter

Repeat Title

Repeat Track

Repeat All

Random

Repeat Off

3 With some BD-ROM and DVD-video titles, it is not possible to select any Play Mode options.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Getting Started04

Frequently Asked Questions

First check that you loaded the disc the right way up (label side

up), and that it’s clean and not damaged. See

on page 44 for information on cleaning discs.

If a disc loaded correctly won’t play, it’s probably an

incompatible format or disc type. See

on page 6 for more on disc compatibility.

Your TV is probably not compatible with the selected video

output resolution. Check your TV for compatibility with

progressive scan video and higher resolutions. Press the

OUTPUT RESOLUTION button to switch the video output. See

also on page 12.

When playing some discs, there may be no composite video,

S-Video and/or component video output, or high-definition

content may be converted to standard-definition 576i/480i or

576p/480p component output. This is for content protection. To

view the disc, connect the player to an HDMI-compatible

display. See on page 11.

Some movie formats are such that even when played on a

widescreen TV, black bars appear at the top and bottom of the

screen. This is not a malfunction.

Make sure that you’ve selected this player as the HDMI input in

the settings for the component you’re using. You may need to

refer to the instruction manual of the component to do this.

An HDMI connection can only be made with other HDMI

components, or a High-bandwidth Digital Content Protection

(HDCP)-compatible DVI component. See

on page 11 for more on HDMI compatibility.

Make sure the output resolution of this player matches that of

the component you have connected using HDMI. See

on page 12.

Playback sample rate of the audio is downsampled to 48 kHz.

192 kHz/96 kHz BD and 96 kHz DVD discs only output digital

audio downsampled to 48 kHz through the optical and coaxial

outputs.

96 kHz 7.1ch BD discs only output digital audio downsampled to

48 kHz through HDMI output when video output is 576i/480i or

576p/480p over HDMI. These are not malfunctions.

When mono audio is split into the L and R channels, there may

be a small loss of volume.

You won’t hear any sound from the HDMI output if your

component is only DVI/HDCP-compatible.

First of all check the settings of the media server you’re using.

Make sure that if you made the network settings automatically

on this player then you also select auto setup on the server.

(Likewise, if you made the settings manually on the server, you

should set up this player manually.)

Check also that you are using the right kind of LAN cable for the

type of connection you made: a standard straight LAN cable if

this player is connected to a hub; a crossed LAN cable for direct

connection to a PC. See also on page 14.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Disc Navigator05

Displaying the Browse menu

• Press to display the Browse menu:

Depending on the browse menu, certain options may not be

selectable.

•All Movies: Display all movie files found on the disc.

•Browse: Browse movies by Genre, Quicklist, or Folders. See also

below.

•Search: Find a movie by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also below.

•Sort: Sort movies by date (oldest first or most recent first) or

alphabetically by title or genre (‘A’ first or ‘Z’ first).

Browsing movies

The Browse sub-menu gives you three ways to browse movies.

•Go back: Return to the previous menu.

•Genres: Display all movie genres and how many movies are in

each one. Select a genre and press ENTER to see the list of

movies in that genre.

•Quicklist: Display a list of all the movies currently in your

Quicklist. Press to display the Movie Options menu, where

you can start playback or remove movies from the Quicklist:

•Folders: Display a list of folders and movie files. Select a folder

and press ENTER to see the list of subfolders/movies files in that

folder. When you play a file in this mode, continuous play of files

in that folder does not occur.

Searching movies

From the Search sub-menu you can enter a few (up to 20) characters

of a movie title or genre. As each character is entered into the

search field the search results are dynamically updated, narrowing

down the list of movies until you can see the one you’re looking for.

•Usethe and ENTER buttons to select characters

from the keypad.

•SelectSHFT to toggle between upper and lower case.

•SelectSPC to insert a space.

•SelectDEL to delete the character at the current cursor position

in the search field.

•SelectCLR to clear the search field.

•SelectDONE to close the keypad and select movies or genres

from the search results; select CANCEL to close the keypad and

clear the search results.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Disc Navigator05

•Quicklist: Display thumbnails of all the photos currently in your

Quicklist. Press ENTER to display the Photo Options menu, from

where you can start slideshow playback or remove photos from

the Quicklist:

•Folders: Display a list of folders and photo files on the disc.

Select a folder and press ENTER to see the subfolders/photos.

When you play a file in this mode, continuous play of files in that

folder does not occur.

Searching photos

From the Search sub-menu you can enter a few (up to 20) characters

of a photo title. As each character is entered into the search field the

search results are dynamically updated, narrowing down the list of

photos until you can see the one you’re looking for.

See on page 26 for how to use the screen keypad.

Music Navigator

The music section of the Disc Navigator allows you to browse and

play all the compatible music files found on the loaded BD-ROM or

DVD-R/-RW disc (non-music files are not displayed).

See also on page 7 for more on compatible file

types.

1 If you haven’t already done so, select ‘Disc Navigator’ from

the Home Menu, then ‘Music’.

You should see a list of the artist names on the disc.

2Usethe buttons to change the current selection

(highlighted in yellow).

3 Press ENTER to display the Album list.

4 Select the Album you want to listen to and press ENTER to

display the Song list.

• When the movie length cannot be determined, it is displayed as

“-:--”.

5Usethe buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the artist and album name, genre and file format, for the current

selection.

6 Press ENTER to play the currently highlighted music.

The display shows the Now Playing screen.

• Press to start or resume playback from the last track played

on the Now Playing screen.

Displaying the Song Options menu

•Press to display Song Options menu:

•Play Song: Play the selected song from the beginning.

•Add to Quicklist: Add the selected song to your Quicklist. The

Quicklist feature is a useful way to organize music files for handy

selection and playback. The Quicklist can contain up to 25

songs.1

Note

1 Quicklists are lost when you exit Music Navigator.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Home Media Gallery06

Chapter 6

Using the Home Media Gallery

Introduction

The Home Media Gallery allows you to browse and play movies,

music and photos stored on media servers connected on an

identical Local Area Network (LAN) as the player. This unit allows for

the playing of files stored on the following:

• PCs running Microsoft Windows XP with Windows Media

Connect installed

• PCs running Microsoft Windows Vista or XP with Windows

Media Player 11 installed

• DLNA-compatible digital media servers (on PCs or other

components)

About network playback

The network playback function of this unit uses the following

technologies:

Windows Media Connect

See on page 36 for details.

PlaysForSure

PlaysForSure is a marketing certification given by Microsoft. The

PlaysForSure logo makes it easy to find digital media stores and

devices that work together. Digital media purchased from online

stores carrying the PlaysForSure logo is available for use on this

unit.

This unit complies with PlaysForSure Requirements Specification

for Network Devices Version 2.01.

Windows Media DRM

Microsoft Windows Media Digital Rights Management (WMDRM) is

a platform to protect and securely deliver content for playback on

computers, portable devices and network devices. Home Media

Gallery functions as a WMDRM 10 for networked devices. WMDRM-

protected content can only be played on media servers supporting

WMDRM.

DLNA

The Digital Living Network Alliance (DLNA) is a cross-industry

organization of consumer electronics, computing industry and

mobile device companies. Digital Living provides consumers with

easy sharing of digital media through a wired or wireless network in

the home.

The DLNA certification logo makes it easy to find products that

comply with the DLNA Interoperability Guidelines. This unit

complies with DLNA Interoperability Guidelines v1.0.

When a PC running DLNA server software or other DLNA-

compatible device is connected to this player, some setting changes

of software or other devices may be required. Please refer to the

operating instructions for the software or device for more

information.

Content playable over a network

Even when encoded in a compatible format, some files may not play

correctly. See on page 7. Some functions may not

be supported depending on the server type or version used.

Supported file formats vary by server. As such, files not supported by

your server are not displayed on this unit.

For more information check with the manufacturer of your server.

About playback behavior over a network

• Playback may stall when the PC is switched off or any media

files stored on it are deleted while playing content.

• If there are problems within the network environment (heavy

network traffic, etc.) content may not be displayed or played

properly (playback may be interrupted or stalled). For best

performance, a 100BASE-TX connection between player and PC

is recommended.

• Playback performance will vary with the power and condition

(seek time of the hard disk, etc.) of the PC being used.

• If several clients are playing simultaneously, as the case may be,

playback is interrupted or stalled.

• Depending on the security software installed on a connected PC

and the setting of such software, network connection may be

blocked.

• Problems with the PC may cause malfunctions.

Pioneer is not responsible for any malfunction of the player and/or

the Home Media Gallery features due to communication error/

malfunctions associated with your network connection and/or your

PC, or other connected equipment. Please contact your PC

manufacturer or Internet service provider.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Home Media Gallery06

Displaying the Browse menu

• Press to display the Browse menu:

Depending on the browse menu, certain options may not be

selectable.

•All Movies: Display all movie files found on the selected server.

•Browse: Browse movies by Genre, Quicklist or Folders. See also

below.

•Search: Find a movie by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also below.

•Sort: Sort movies by date (oldest first or most recent first), or

alphabetically by title or genre (‘A’ first or ‘Z’ first).

•Movie Sources: Display servers on the network. See also

below.

Browsing movies

The Browse sub-menu gives you three ways to browse movies.

•Go back: Return to the previous menu.

•Genres: Display all movie genres and how many movies are in

each one. Select a genre and press ENTER to see the list of

movies in that genre.

•Quicklist: Display a list of all the movies currently in your

Quicklist. Press to display the Movie Options menu, where

you can start playback or remove movies from the Quicklist:

•Folders: Display a list of folders and movie files. Select a folder

and press ENTER to see the list of movies and subfolders within

the folder. (The folder configuration may change depending on

the server type.) When you play a file in this mode, continuous

play of files in that folder does not occur.

Searching movies

From the Search sub-menu you can enter a few (up to 20) characters

of a movie title or genre. As each character is entered into the

search field the search results are dynamically updated, narrowing

down the list of movies until you can see the one you’re looking for.

•Usethe and ENTER buttons to select characters

from the keypad.

•SelectSHFT to toggle between upper and lower case.

•SelectSPC to insert a space.

•SelectDEL to delete the character at the current cursor position

in the search field.

•SelectCLR to clear the search field.

•SelectDONE to close the keypad and select a movie or genre

from the search results; select CANCEL to close the keypad and

clear the search results.

Movie sources

From the movie sources window you can see all the servers found

on the network and change the selected server.

• Some servers found on the network may not be available for the

following reasons:

– The player is collecting file information from the server.

– There are no playable movie files on the server.

– This player is not authorized for the PC (Windows Media

Connect only). See also on page 36.

• Servers not currently available appear with a lock icon ( ) in the

server list.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Home Media Gallery06

•Folders: Display a list of folders and photo files. Select a folder

and press ENTER to see a list of photos and subfolders within

the folder. (The folder configuration may change depending on

the server type.) When you play a file in this mode, continuous

play of files in that folder does not occur.

Searching photos

From the Search sub-menu you can enter a few (up to 20) characters

of a photo title. As each character is entered into the search field the

search results are dynamically updated, narrowing down the list of

photos until you can see the one you’re looking for.

See on page 32 for how to use the screen keypad.

Photo sources

From the photo sources window you can see all the servers found on

the network and change the selected server. See on

page 32 for more information.

Music Navigator

From the music section of the Home Media Gallery you can browse

and play all the compatible song files found on your local area

network (non-music files are not displayed).

See also on page 7 for more on compatible file

types.

1 If you haven’t already done so, select ‘Home Media Gallery’

from the Home Menu, then ‘Music’.

You should see a list of all the artist names found on the selected

server.

2Usethe buttons to change the current selection

(highlighted in yellow).

3 Press ENTER to display the Album list.

4 Select the Album you want to listen to and press ENTER to

display the Song list.

• When the movie length cannot be determined, it is displayed as

“-:--”.

5Usethe buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the artist and album name, genre and file format, for the current

selection.

6 Press ENTER to play the currently highlighted music.

The display shows the Now Playing screen.

• Press to start or resume playback from the last track played

on the Now Playing screen.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Using the Home Media Gallery06

Now playing song information

The Now Playing screen shows detailed information about the song

playing, including:

• Artist and song title

• Progress bar (elapsed time and song length)

• Album name

•Genre

•Fileformat

• Browse menu

•Playstatus

•Playmode

• Next/Previous song names

Music sources

From the music sources window you can see all the servers found

on the network and change the selected server. See

on page 32 for more information.

About Windows Media Connect

Windows Media Connect is software to deliver music, photos and

movies from a Microsoft Windows XP computer to home stereo

systems and TVs.

With this software, you can play back files stored on the PC through

various devices wherever you like in your home.

At this time you cannot download the Windows Media Connect

software from Microsoft’s website. If your server currently does not

have Windows Media Connect installed, install Windows Media

Player 11 (for Windows XP) instead. This software can be

downloaded from Microsoft’s website.

For more information check the official Microsoft website.

Authorizing this player

In order to be able to browse and play files from a Windows XP PC

with Windows Media Connect this player must be authorized. This

happens automatically when the player makes a connection over

the network to the PC. If not, please authorize this player manually

on the PC.

For more information on authorizing this player, refer to the

instruction manual of your server.

FAQ

– File names that don’t end with one of the permitted extensions

won’t be recognized by this player. See also on

page 7.

– Supported file formats vary by server. As such, files not

supported by your server are not displayed on this unit.

For more information check with the manufacturer of your

server.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Video/Audio Adjust menu07

Audio Adjust

From the Audio Adjust menu you can set the Audio DRC (Dynamic

Range control).

Audio DRC

• Default setting: Off

When watching Dolby Digital BD and DVD discs, as well as PC files

with Dolby Digital audio, at low volume, it’s easy to lose the quieter

sounds completely — including some of the dialog. Switching

Audio DRC to On can help by bringing up the quieter sounds, while

controlling loud peaks.

How much of a difference you hear depends on the material you’re

listening to. If the material doesn’t have wide variations in volume,

you may not notice much change.

Important

• Audio DRC is effective with the following types of audio:

– Analog audio from the AUDIO OUT (2ch) and AUDIO OUT

(5.1ch) jacks.

– PCM audio from the DIGITAL AUDIO OUT and HDMI OUT

jacks (see also on page 42).

1 Press HOME MENU and select ‘Video/Audio Adjust’ from

the on-screen display.

2 Select ‘Audio Adjust’.

3 Highlight Audio DRC, then use the buttons to change

to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.

4 Press ENTER or RETURN to make the setting and exit the

Audio Adjust screen.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Initial Setup menu08

Audio Out

Dolby Digital Out Dolby Digital • Outputs a Dolby Digital signal when a Dolby Digital source is being played.

Dolby Digital PCM Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment doesn’t

support Dolby Digital audio.

DTS Out DTS • Outputs a DTS signal when a DTS source is being played.

DTS PCM Converts sources with DTS audio to Linear PCM output. Use if your connected equipment doesn’t

support DTS audio.

DTS Downmix Stereo • If you’ve selected DTS PCM in above, you can choose the way the DTS signal is down-

mixed PCM audio. Stereo downmixes the signal to 2-channel stereo.

Lt/Rt Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This allows you

to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic capability.)

HDMI Audio Out Auto • Dolby Digital and DTS sources are output as a bitstream signal. However, depending on the HDMI

device connected and the content being played, Linear PCM audio may be output.

PCM All audio signals are converted to Linear PCM.

Language

OSD Language English • Sets the language of the on-screen displays to English.

Choose from the languages displayed for the on-screen displays.

Audio Language English • Sets both the BD-ROM and DVD-Video default audio language to English.

Choose from the languages displayed to set the default audio language for BD-ROM and DVD-Video

playback.

Other Continue to the next screen to set the default audio language for BD-ROM and DVD-Video disc

playback. You can select the language name or enter the code number (see on page 47 for the code

list).

Subtitle Language English • Sets the default subtitle language for BD-ROM and DVD-Video playback to English.

Choose from the languages displayed to set the default subtitle language for BD-ROM and

DVD-Video playback.

Other Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video disc

playback. You can select the language name or enter the code number (see on page 47 for the code

list).

BD/DVD Menu

Language

w/Subtitle Language

•

Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle

language.

Choose from the displayed languages to set the default language for BD-ROM and DVD-Video

menus.

Other Continue to the next screen to set the default menu language for BD-ROM and DVD-Video disc

menus. You can select the language name or enter the code number (see on page 47 for the code

list).

Subtitle Display On • Select to have BD-ROM and DVD-Video discs display subtitles.

Off Select to switch off subtitle display.

Parental Lock

Change Password

(Set Password)

Next Screen Set or change the password necessary to play BD or DVD discs that have level/age restrictions. In

order to change the password, you’ll need to first enter your existing one.

DVD Parental Lock Change Level Enter your password and then set the parental lock level. Discs with a lock level higher than that set

in the player will require the password to play.

DVD Country Code Enter your password and then set a country/area code. This ensures that you see the scenes

intended for your country or area. See on page 47.

BD Parental Lock Change Age

Restriction

Enter your password and then set the age restriction.

“255” indicates no parental control.

Setting Options Explanation

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Initial Setup menu08

About the audio output settings

The table below shows how the audio settings you make in the Initial Setup menu (page 39) affect the output to the analog (2ch/5.1ch), digital

and HDMI outputs with various types of disc/files.

*10

*11

*12

*13

*14

*15

Note

• Output sampling rate is 48 kHz through the digital audio outputs.

• MPEG audio is always output as linear PCM.

Disc audio format Analog outputs Digital outputs HDMI output

2ch*1 5.1ch*1 PCM convert*2 Bitstream*3 PCM*4 Auto*4

BD-ROM Dolby Digital

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital*11 5.1ch PCM*9 Dolby Digital*8, 11

Dolby Digital plus

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital*5, 11 7.1ch PCM*9 Dolby Digital*5, 8, 11

Dolby TrueHD*14

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital*6, 11 5.1ch PCM*9 Dolby Digital*6, 8, 11

DTS

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS*11 5.1ch PCM*9 DTS*8, 11

DTS-HD*15

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS*7, 11 5.1ch PCM*9 DTS*7, 8, 11

Linear PCM 7.1ch

2ch downmix PCM

5.1ch downmix PCM

2ch downmix PCM 2ch downmix PCM

7.1ch PCM*9, 12,13 7.1ch PCM*9, 12,13

Linear PCM 5.1ch

2ch downmix PCM

5.1ch PCM*10

2ch downmix PCM 2ch downmix PCM

5.1ch PCM*9, 10,12 5.1ch PCM*9, 10,12

Linear PCM 2ch 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM*12 2ch PCM*12

DVD-Video Dolby Digital

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

Dolby Digital 5.1ch PCM*9 Dolby Digital*8

DTS

2ch downmix PCM

5.1ch PCM

2ch downmix PCM

DTS 5.1ch PCM*9 DTS*8

MPEG 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM

Linear PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

Chapter 9

Additional information

Taking care of your player and discs

Handling discs

When holding discs of any type, take care not to leave fingerprints,

dirt or scratches on the disc surface. Hold the disc by its edge or by

the center hole and edge.

Damaged or dirty discs can affect playback performance. Take care

also not to scratch the label side of the disc. Although not as fragile

as the recorded side, scratches can still result in a disc becoming

unusable.

Should a disc become marked with fingerprints, dust, etc., clean

using a soft, dry cloth, wiping the disc lightly from the center to the

outside edge as shown in the diagram below.

If necessary, use a cloth soaked in alcohol, or a commercially

available DVD/BD cleaning kit to clean a disc more thoroughly.

Never use benzine, thinner or other cleaning agents, including

products designed for cleaning vinyl records.

Storing discs

Although BD and DVD discs are more durable than vinyl records,

you should still take care to handle and store discs correctly. When

you’re not using a disc, return it to its case and store upright. Avoid

leaving discs in excessively cold, humid, or hot environments

(including under direct sunlight).

Don’t glue paper or put stickers onto the disc, or use a pencil, ball-

point pen or other sharp-tipped writing instrument. These could all

damage the disc.

For more detailed care information see the instructions that come

with discs.

Do not load more than one disc into the player at a time.

Damaged and odd-shaped discs

Discs spin at high speed inside the player. If you can see that a disc

is cracked, chipped, warped, or otherwise damaged, don’t risk using

it in your player — you could end up damaging it.

This player is designed for use with conventional, fully circular discs

only. Use of shaped discs is not recommended for this product.

Pioneer disclaims all liability arising in connection with the use of

shaped discs.

Do not use any kind of adapter when playing 8 cm DVD discs. This

size disc can be played in this player without an adapter; just use the

smaller disc guide in the disc tray.

Cleaning the pickup lens

The player’s lens should not become dirty in normal use, but if for

some reason it should malfunction due to dust or dirt, consult your

nearest Pioneer-authorized service center. Although lens cleaners

for DVD players are commercially available, we advise against using

them since some may damage the lens.

Problems with condensation

Condensation may form inside the player if it is brought into a warm

room from outside, or if the temperature of the room rises quickly.

Although the condensation won’t damage the player, it may

temporarily impair its performance. For this reason you should leave

it to adjust to the warmer temperature for about an hour before

switching on and using.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

TV Preset code list

Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for

the manufacturer in the list will not work for the model that you are using.

Manufacturer Code(s) Manufacturer Code(s) Manufacturer Code(s) Manufacturer Code(s)

ACURA 44

ADMIRAL 31

AIWA 60

AKAI 32, 35, 42

AKURA 41

ALBA 07, 39, 41, 44

AMSTRAD 42, 44, 47

ANITECH 44

ASA 45

ASUKA 41

AUDIOGONIC 07, 36

BASIC LINE 41, 44

BAUR 31, 07, 42

BEKO 38

BEON 07

BLAUPUNKT 31

BLUE SKY 41

BLUE STAR 18

BPL 18

BRANDT 36

BTC 41

BUSH 07, 41, 42, 44, 47, 56

CASCADE 44

CATHAY 07

CENTURION 07

CGB 42

CIMLINE 44

CLARIVOX 07

CLATRONIC 38

CONDOR 38

CONTEC 44

CROSLEY 32

CROWN 38, 44

CRYSTAL 42

CYBERTRON 41

DAEWOO 07, 44, 56

DAINICHI 41

DANSAI 07

DAYTON 44

DECCA 07, 48

DIXI 07, 44

DUMONT 53

ELIN 07

ELITE 41

ELTA 44

EMERSON 42

ERRES 07

FERGUSON 07, 36, 51

FINLANDIA 35, 43, 54

FINLUX 32, 07, 45, 48, 53, 54

FIRSTLINE 40, 44

FISHER 32, 35, 38, 45

FORMENTI 32, 07, 42

FRONTECH 31, 42, 46

FRONTECH/PROTECH 32

FUJITSU 48

FUNAI 40, 46, 58

GBC 32, 42

GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18

GEC 07, 34, 48

GELOSO 32, 44

GENERAL

GENEXXA 31, 41

GOLDSTAR 10, 23, 21, 02, 07, 50

GOODMANS 07, 39, 47, 48, 56

GORENJE 38

GPM 41

GRAETZ 31, 42

GRANADA 07, 35, 42, 43, 48

GRADIENTE 30, 57

GRANDIN 18

GRUNDIG 31, 53

HANSEATIC 07, 42

HCM 18, 44

HINARI 07, 41, 44

HISAWA 18

HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10, 24,

25, 18

HUANYU 56

HYPSON 07, 18, 46

ICE 46, 47

IMPERIAL 38, 42

INDIANA 07

INGELEN 31

INTERFUNK 31, 32, 07, 42

INTERVISION 46, 49

ISUKAI 41

ITC 42

ITT 31, 32, 42

JEC 05

JVC 13, 23

KAISUI 18, 41, 44

KAPSCH 31

KENDO 42

KENNEDY 32, 42

KORPEL 07

KOYODA 44

LEYCO 07, 40, 46, 48

LIESENK&TTER 07

LOEWE 07

LUXOR 32, 42, 43

M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36, 51

MAGNADYNE 32, 49

MAGNAFON 49

MAGNAVOX 07, 10, 03, 12, 29

MANESTH 39, 46

MARANTZ 07

MARK 07

MATSUI 07, 39, 40, 42, 44, 47, 48

MCMICHAEL 34

MEDIATOR 07

MEMOREX 44

METZ 31

MINERVA 31, 53

MITSUBISHI 09, 10, 02, 21, 31

MULTITECH 44, 49

NEC 59

NECKERMANN 31, 07

NEI 07, 42

NIKKAI 05, 07, 41, 46, 48

NOBLIKO 49

NOKIA 32, 42, 52

NORDMENDE 32, 36, 51, 52

OCEANIC 31, 32, 42

ORION 32, 07, 39, 40

OSAKI 41, 46, 48

OSO 41

OSUME 48

OTTO VERSAND 31, 32, 07, 42

PALLADIUM 38

PANAMA 46

PANASONIC 31, 07, 08, 42, 22

PATHO CINEMA 42

PAUSA 44

PHILCO 32, 42

PHILIPS 31, 07, 34, 56, 68

PHOENIX 32

PHONOLA 07

PROFEX 42, 44

PROTECH 07, 42, 44, 46, 49

QUELLE 31, 32, 07, 42, 45, 53

R-LINE 07

RADIOLA 07

RADIOSHACK 10, 23, 21, 02

RBM 53

RCA 01, 10, 15, 16, 17, 18, 61, 62, 09

REDIFFUSION 32, 42

REX 31, 46

ROADSTAR 41, 44, 46

SABA 31, 36, 42, 51

SAISHO 39, 44, 46

SALORA 31, 32, 42, 43

SAMBERS 49

SAMSUNG 07, 38, 44, 46, 69, 70

SANYO 35, 45, 48, 21, 14, 91

SBR 07, 34

SCHAUB LORENZ 42

SCHNEIDER 07, 41, 47

SEG 42, 46

SEI 32, 40, 49

SELECO 31, 42

SHARP 02, 19, 27, 67, 90

SIAREM 32, 49

SIEMENS 31

SINUDYNE 32, 39, 40, 49

SKANTIC 43

SOLAVOX 31

SONOKO 07, 44

SONOLOR 31, 35

SONTEC 07

SONY 04

SOUNDWAVE 07

STANDARD 41, 44

STERN 31

SUSUMU 41

SYSLINE 07

TANDY 31, 41, 48

TASHIKO 34

TATUNG 07, 48

TEC 42

TELEAVIA 36

TELEFUNKEN 36, 37, 52

TELETECH 44

TENSAI 40, 41

THOMSON 36, 51, 52, 63

THORN 31, 07, 42, 45, 48

TOMASHI 18

TOSHIBA 05, 02, 26, 21, 53

TOWADA 42

ULTRAVOX 32, 42, 49

UNIDEN 92

UNIVERSUM 31, 07, 38, 42, 45, 46, 54

VESTEL 07

VICTOR 13

VOXSON 31

WALTHAM 43

WATSON 07

WATT RADIO 32, 42, 49

WHITE WESTINGHOUSE 07

YOKO 07, 42, 46

ZENITH 03, 20

PIONEER 00, 31, 32, 07, 36, 42, 51

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

Troubleshooting

Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check

the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being

used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your

dealer to carry out repair work.

Playback

Problem Remedy

The disc won’t play or is automatically

ejected after loading.

•Make sure the disc is free from dirt and dust and is not damaged (see

on page 44).

•Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.

•Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the

player, the disc cannot be used (see and on page 8).

•Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player

near an air-conditioning unit.

•Make sure the disc is compatible with this player (see on

page 6).

Picture freezes and the front panel and

remote control buttons stop working.

•Press (stop), then start playback again ( (play)).

•Press the front panel STANDBY/ON button to switch the power off, then switch back on and

restart playback. If the power fails to switch off, press and hold STANDBY/ON for 20 seconds until

the power switches off. Then switch on again by pressing STANDBY/ON.

•Unplug from the wall socket, then plug back in and switch on again by pressing STANDBY/ON to

switch the player on.

No picture/No colour. •Incorrect video connections: Check that connections are correct and that plugs are inserted fully.

Also check the video cable for damage.

•TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected

equipment.

•Depending on your display, some of the settings may result in the picture disappearing. In this case,

press OUTPUT RESOLUTION repeatedly until the picture re-appears (see

on page 12).

•Some BD-ROM discs output video only over HDMI.

The video output is set to 720p/1080i/

1080p, but the actual output is 576i/480i or

576p/480p.

•For copy-protection purposes, DVD-Video and some BD-ROM discs output 576i/480i or 576p/480p

over the component output.

Screen is stretched or aspect does not

change.

•The or setting in the Initial Settings menu is incorrect. See

and on page 39 for how to set these correctly for your TV/monitor.

•When is set to 720p, 1080i or 1080p, video is output in 16:9 Widescreen

format even if is set to 4:3 (Standard).

Picture disturbance during playback or

dark image.

•This player is compatible with Macrovision System copy guard. Some discs include a copy prevention

signal, and when this type of disc is played back, stripes etc., may appear on some sections of the

picture depending on the TV. This is not a malfunction.

•Due to the player’s copy protection circuits, connection of this device through a VCR or an AV

selector may cause picture problems. This is not a malfunction.

No audio, or audio is distorted. •No audio is output during slow motion playback or when scanning contents.

•Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

•Check that the disc is free from dust and dirt, and that it is not damaged (

on page 44).

•Check that all interconnects are firmly inserted.

•Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the

cable for damage.

•Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.

•Checkthe on page 41. If this is set to , output from the AUDIO OUT

(2ch) jacks will be incorrect.

•Checkthe on page 43.

•For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and HDMI.

•When Audio CDs containing text files or such data are played back, sound is muted.

The analog audio is OK, but there appears

to be no optical/coaxial digital audio

signal.

•Check that the and settings (see on page 40) are suitable for

your amplifier/receiver — check the instruction manual that came with your amplifier/receiver (also

check that the output settings on your amplifier/receiver are correct).

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

Network troubleshooting

No HDMI audio output. •If you have connected to an HDCP-compatible DVI component, there won’t be any audio output from

the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).

•This player does not output multi-channel 192 kHz audio. Press AUDIO during playback to switch

between the available audio streams.

HDMI Control does not function. •Verify that the HDMI cable is firmly connected.

•Make sure that this unit’s is set to On (see on page 41).

•Make sure that the HDMI Control for the connected components is set to On. For more information,

refer to the operating manual for the connected component.

•This function may not work properly if you have multiple components connected to a single plasma

television, AV system (amplifier or AV receiver etc.), or HD AV Converter. For more information refer

to the operating manual of your plasma television, AV system, or HD AV Converter.

•You can enable HDMI Control by turning the setting to On for all components

connected via HDMI cable. Check the video output from this unit once you have completed

making connections and settings for all components. You will need to check the video output

each time you change connected components or remove the HDMI cable.

•Check whether the connected component supports HDMI Control or not. For more information refer

to the operating manual of your plasma television, AV system (amplifier or AV receiver etc.), or HD AV

Converter.

•Certain functions are not supported on some plasma televisions.

•This player does not support HDMI Control-compatible components other than those made by

Pioneer.

•This unit will not function properly with components that do not support HDMI Control, or when

connected with components other than those made by Pioneer.

Problem Remedy

Home Media Gallery is not available. • LAN indicator is unlit:

– Check the physical connections (hub, 100BASE-TX/10BASE-T or crossed cable and other cable

quality when cabled directly to a PC).

– If the player is connected to a network via a hub, make sure that the Ethernet (CAT-5 LAN) cable

you’re using is a ‘standard’ or ‘straight through’ type.

– If the player is connected directly to a PC, make sure that the Ethernet (CAT-5 LAN) cable you’re

using is a ‘crossed’ or ‘crossover’ type.

•LAN indicator is lit:

– If this player’s IP address is set automatically, make sure that the media server’s address is also set

automatically. If the IP address of the media server has been set manually, set the IP address of the

player manually too (see settings page 41).

– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct

if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu

(see settings page 41).

– Confirm that the media server is on and not in standby or sleep mode.

– Check the network and other settings on the media server.

– Check that this player and the media server are on the same Local Area Network (LAN).

– Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if

necessary.

– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if

one or more folders has become corrupted on the server.

– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

A connected media server does not show

up in the source list in the Home Media

Gallery.

•Confirm that the media server is on and not in standby or sleep mode.

•Check the network and other settings on the media server.

•Check that this player and the media server are on the same Local Area Network (LAN).

•Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if

necessary.

•Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if

one or more folders has become corrupted on the server.

•Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

•Check that there are playable files on the media server.

•After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

A media server shows up in the source list

but is not available (a lock icon ()

appears).

•Check the media server setup. If a client is registered (authorized) manually, the setup procedure

may have to be run again.

•Check that there are playable files on the media server.

•After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

When the is

set to DVD and you insert a hybrid disc

with BD and CD layers, the BD layer is

played back.

•When the layer set to playback at S is not present on an inserted hybrid

disc, the BD layer is played back.

The setting

cannot be changed (it is grayed out).

•You cannot change the when a disc is inserted. Eject the disc to make

changes.

A ‘ ’ appears in the file name. •A character that cannot be displayed on this unit is included in the file name. Use only alphanumeric

characters if you want file names to be displayed correctly on this player.

The power automatically turns on. •This unit’s power may be turned on when you control this unit from a connected plasma television. If

you do not want this unit to be turned on in this way, set this unit’s to Off (see

on page 41).

Problem Remedy

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

License

[MPEG4IP]

This software is based in part on Mozilla Public License 1.1 see http://www.mozilla.org/MPL/ for information.

[OpenSSL]

OpenSSL License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed

by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written

permission. For written permission, please contact openssl-core@openssl.org.

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the

OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit (http://www.openssl.org/)”.

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL

PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson

(tjh@cryptsoft.com).

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found

in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the

same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should

be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online

or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic

software written by Eric Young (eay@cryptsoft.com)”

The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This

product includes software written by Tim Hudson (tjh@cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and

put under another distribution licence [including the GNU Public Licence.]

[tiff]

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF

USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

[FreeType]

THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS

BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

[GIFLIB]

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS

BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR

IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

[libhttp]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The following copyright applies to the base64 code:

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that both the

above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting

documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior

permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.

THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL

M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

[Vera.ttf/VeraMono.ttf]

Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.

[TinyLogin]

[Shadow Utilities]

Bigelow & Holmes Inc and URW++ GmbH Luxi font license

[Luxi fonts]

trademark of Bigelow & Holmes Inc.

THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR

OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for

noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b

above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means

all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation

of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source

or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component

itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source

code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object

code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program

or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work

based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights

granted herein.

You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed

on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a

consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all

those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section

has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have

made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder

who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar

in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”,

you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the

Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.

For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our

decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software

generally.

NO WARRANTY

11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD

THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS

OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO

OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”

and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party

saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.

A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of

those functions and data) to form executables.

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either

the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications

and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)

“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code

for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using

the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use

of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to

the absence of any warranty; and distribute a copy of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an

argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such

function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute

square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied

function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably

considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as

separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must

be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who

wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or

distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter

all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version

than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other

change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and

derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and

2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the

same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object

code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a

“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the

Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such

executables.

When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the

Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself

a library. The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less

in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus

portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing

that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions

of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and

reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You

must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among

them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work

(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable

“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable

containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to

recompile the application to use the modified definitions.)

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Additional information09

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute

and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion

of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software

Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin

Street, Fifth Floor, Boston, MA 02110-1301 USA

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.

<signature of Ty Coon>, 1 April 1990

Ty Coon, President of Vice

That’s all there is to it!

[Linux Source Notice]

The software programs used on this product include the Linux operating system. The Linux contains software licensed for use based on the terms of a GNU

General Public License. The machine readable copy of the corresponding source code is available for the cost of distribution.

For more information or to obtain a copy, contact your local Pioneer Customer Service center.

Details of the GNU General Public License can be found at the GNU website (http://www.gnu.org).

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Before you start 01

Chapter 1

Before you start

Features

BD-ROM playback

Blu-ray Disc is a next-generation video disc format featuring far

higher disc capacity than conventional DVD. The higher capacity

makes a whole range of new and enhanced features possible, such

as support for high-definition video up to 1920 x 1080 pixels, high

quality, surround sound audio, greater interactivity and richer

content.

BD-ROM discs are commercially produced discs (Video Distribution

format) that can contain movie and other video content, interactive

content, enhanced menu features such as pop-up menus (press

POPUP MENU/MENU during playback for these), full-colour, high-

definition animated buttons and animated menu transition effects,

button sounds (sounds are played when menu buttons are selected

or activated), high-definition bitmap subtitles supporting full-colour

images with frame-accurate animation effects up to full video frame

rate, and so on.

While BD capacity is enough for most applications, the BD-ROM

standard allows for content to be spread across several discs,

removing the limit of one physical disc. Follow the on-screen

instructions during playback when using these special kinds of

discs.

BD-J application

The BD-ROM specification supports Java for interactive content.

The Java specification for BD-ROM is known as BD-J. This allows

content providers to put games and other interactive material linked

to specific titles on to BD-ROM discs. (This player does not support

downloadable BD-J content, direct connection to the Internet or the

retrieval of content through the Internet.)

Java and all Java-based trademarks and logos are trademarks or registered

trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

Esmertec and Jbed are trademarks and/or registered trademarks of Esmertec AG.

Connect to a local area network

Connect this player to one or more computers in your house via

Ethernet and use them as media servers, streaming audio, video

and still image files for playback on your TV and/or audio system.

HDMI digital interface

The HDMI (High-Definition Multimedia Interface) interconnect

provides high quality digital audio and video, all from a single user-

friendly connector. HDMI is the first consumer electronics interface

to support uncompressed standard, enhanced, or high-definition

video plus standard to multi-channel surround sound audio, all

using one interface. You can easily connect to an HDMI-equipped

AV receiver or audio-visual device for high quality audio and video.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

HDMI Control

By connecting this unit to a Pioneer plasma television, AV system

(amplifier or AV receiver etc.), or HD AV Converter with an HDMI

cable, you can control this unit from the connected plasma

television, AV system or HD AV Converter, as well as have the

connected plasma television, AV system or HD AV Converter

automatically change inputs in response to this unit starting

playback or having the GUI screen (ex. Disc Navigator) displayed

(known as the Auto-select function). The connected plasma

television can there by have its power turned from off to on by this

function.

You can also have this unit turn on automatically when you control

this unit from a connected plasma television is turned on

(Simultaneous power function).

Additionally, when the language information from a connected

plasma television is received, you can have this unit’s on-screen

display language change automatically to that of the plasma

television (only when playback is stopped and GUI screen is not

displayed).

Refer to your plasma television’s operating manual for more

information regarding how your plasma television transmits

language information.

For more information about which operations can be carried out by

connecting via HDMI cable, refer to the operating manual for your

plasma television, AV system or HD AV Converter.

PureCinema

When you playback film material (24 frames/second) on a BD-ROM

or DVD-video disc, the progressive scan line automatically converts

the film material to optimum quality (see PureCinema on page 37).

1080/50p, 1080/60p and 1080/24p output video

This player supports a variety of output video resolutions, up to

1080 lines/50 or 60 frames per second, progressive (HDMI only),

making it ideal for playing high-definition Blu-ray Discs.

High quality audio

Blu-ray supports DTS, DTS-HD (DTS-HD is played back as DTS),

Dolby Digital, Dolby Digital Plus, Dolby TrueHD (Dolby TrueHD is

played back as Dolby Digital) and Linear PCM audio in up to eight

channels (up to two channels for 24-bit/192 kHz audio). Connect this

player to a surround-sound AV receiver for a true home theater

experience.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

• “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Important

• This player is not compatible with BD-R/-RE (Blu-ray Disc

Recordable Format Ver. 1 and Blu-ray Disc Recordable Format

Ver. 2), DVD-R/-RW (VR mode), DVD-Audio, DVD-RAM, CDs

(with PC files) or disc types other than those listed above.

• Do not use 8 cm disc adapters with this player. 8 cm discs can

be played directly by placing then in the 8 cm disc depression in

the center of the disc tray.

BD-ROM compatibility

• BD-ROM discs should conform to the BD-ROM Profile1.

• If a disc containing DTS-HD audio is played, this player is only

compatible with bitstream output or playback decoding of

current DVD (DTS) material (sampling rate: 48 kHz max., 5.1ch).

• If a disc containing Dolby TrueHD audio is played, this player is

only compatible with bitstream output or playback decoding of

current DVD (Dolby Digital) material (sampling rate: 48 kHz

max., 5.1ch).

• This player cannot play 8 cm BD-ROM discs.

DVD-R/-RW compatibility

• This player is compatible with DVD-R/-RW discs recorded in

DVD-Video format.

• DVD-R/-RW discs containing PC data can also be played. See

below for file compatibility.

• Unfinalized DVD-R/-RW discs and VR mode DVD-R/-RW discs

cannot be played in this player.

PC-created disc compatibility

Discs recorded using a personal computer may not be playable in

this unit due to the settings of the application software used to

create the disc. Check with the software publisher for more detailed

information.

CD-R/-RW/-ROM compatibility

• This player does not support the playback of CD-R/-RW discs.

• PC files stored on CDs cannot be played back.

• CD-R/-RW discs that are not finalized cannot be played back.

• Regarding copy protected CDs: This product is designed to

conform to the specifications of the audio CD format. This player

does not support the playback or function of discs that do not

conform to these specifications.

DualDisc playback

A DualDisc is a new two -sided disc, one side of which contains DVD

content –video, audio, etc. –while the other side contains non-DVD

content such as digital audio material.

The DVD side of a DualDisc will play in this product (excluding any

DVD-Audio content).

The non-DVD, audio side of the disc is not compatible with this

player.

It is possible that when loading or ejecting a DualDisc, the opposite

side to that being played will be scratched. Scratched discs may not

be playable.

For more detailed information on the DualDisc specification, please

refer to the disc manufacturer or disc retailer.

File compatibility

• Compatible media: DVD-R, DVD-RW, media server on network

(some formats may not be supported depending on the media

server type).

• Even when they are in a supported format, some files may not

play or display depending on the content.

• Even when playing a supported format, some functions may not

operate properly depending on the content.

• DRM-protected contents on DVD-R/-RW discs or on media

servers that do not support WMDRM, and otherwise

incompatible files are skipped.

• Please note, the following file naming structure needs to be

adhered to when creating/renaming any digital media to be

played on the unit (either through computer-created disc media,

or the Home Media Gallery connection). This disclaimer does

not apply to any media purchased at retail locations:

Due to the coding system used, this player will only read/play

files named using standard alphanumeric characters. Any other

characters or symbols (e.g. characters with accents) used in

naming the file will render it unreadable/unplayable by the unit.

If you encounter any difficulties with playback of media, please

rename the file in accordance to this standard.

Supported video formats

• Windows Media Video 9 (WMV9)

– MP@HL

• Windows Media Video 9 (WMV9) Advanced Profile (VC-1)

– AP@L3

• MPEG-2 (PS/TS)

– MP@HL

•MPEG-1

Supported audio formats

• Windows Media Audio 9 (WMA9)

– Bit rate: up to 192 kbps (constant bit-rate (CBR));

up to 384 kbps (variable bit-rate (VBR))

– Sampling rates: 44.1 kHz or 48 kHz

• Windows Media Audio 9 Pro (WMA9 PRO)

– Bit rate: up to 768 kbps

– Sampling rates: 44.1 kHz or 48 kHz

– Channels: up to 5.1ch

• MPEG-1 Audio Layer 3 (MP3)

– Sampling rates: 32 kHz, 44.1 kHz or 48 kHz

– Bit rate: up to 320 kbps

• Linear PCM (WAVE)

– Sampling rates: 44.1 kHz or 48 kHz

Supported image formats

• JPEG

– Baseline JPEG and progressive JPEG/Exif are supported

– Resolution: up to 4096 x 4096 pixels

•PNG

– Resolution: up to 4096 x 4096 pixels

•GIF

– Resolution: up to 4096 x 4096 pixels

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Connecting up

Chapter 2

Connecting up

Rear panel

1ACIN

Connect the supplied power cord here, then plug into a power

outlet.

2 CONTROL IN

Use to control this player from the remote sensor of another Pioneer

component with a CONTROL OUT terminal and bearing the

mark. Connect the CONTROL OUT of the other component to the

CONTROL IN of this player using a mini-plug cord (page 14).

3 HDMI OUT

HDMI output providing a high quality interface for digital audio and

video (page 11).

4 LAN (10/100)

Ethernet port for 10BASE-T (10 Mbps) or 100BASE-TX (100 Mbps)

network connection (page 14).

5 VIDEO OUT and S-VIDEO OUT

Video output (composite) that you can connect to your TV or AV

receiver using the supplied video cable (page 10).

S-Video output that you can use instead of the VIDEO OUT jacks

(page 13).

6 COMPONENT VIDEO OUT

High quality video output for connection to a TV, monitor or AV

receiver that has component video inputs.

Connect using a commercially available three-way component video

cable (page 12).

7 DIGITAL AUDIO OUT – COAXIAL/OPTICAL

Digital audio outputs for connection to a PCM, Dolby Digital, and/or

DTS-compatible AV receiver (page 13).

8 AUDIO OUT (5.1ch)

Multi-channel (5.1ch) analog audio outputs for connection to an AV

receiver with multi-channel analog audio inputs (page 13).

9 AUDIO OUT (2ch)

Stereo analog audio outputs for connection to your TV, AV receiver

or stereo system (page 10).

10 IR IN

Jack for an external IR (infrared) remote control receiver (page 14).

11 IR RECEIVER switch

Switch to the setting compatible with your external IR remote

control receiver (page 14).

Tip

• When connecting this player to your TV, AV receiver or other

equipment, make sure that all components are switched off

and unplugged.

• You may find it useful to have the manuals supplied with your

other components handy when connecting this player.

Downloaded From DvDPlayer-Manual.com Pioneer Manuals