Pioneer Super Tuner IIID AVH-P4100DVD Bedienungsanleitung

English Français Español

Installation Manual

Manuel d’installation

Manual de instalación

DVD AV RECEIVER

AUTORADIO AV LECTEUR DE DVD

RADIO AV CON DVD

AVH-P4100DVD

Contents

Connecting the units ............................ 3

Parts supplied ................................................. 5

Connecting the power cord ........................... 6

When connecting to

separately sold power amp ....................... 8

When connecting

with supplied USB cable .......................... 9

When connecting with

optional CD-IU200V cable ......................... 9

When connecting with

a rear view camera .................................. 10

When connecting with

a multi-channel processor ...................... 11

Connecting and installing

the optical cable connection box ........... 12

Connecting the optical cable ............................... 12

Installing the optical cable connection box ........ 12

When connecting the external

video component and the display .......... 13

When using a display connected to

rear video output .......................................... 13

Installation ........................................... 14

Installation using the screw holes

on the side of the unit ............................. 14

Connecting the units

English

WARNING

• To avoid the risk of accident and the potential

violation of applicable laws, the front DVD or

TV (sold separately) feature should never be

used while the vehicle is being driven. Also, rear

displays should not be in a location where it is a

visible distraction to the driver.

• In some countries or states the viewing of images

on a display inside a vehicle even by persons

other than the driver may be illegal. Where such

regulations apply, they must be obeyed and this

unit’s DVD features should not be used.

CAUTION

• PIONEER does not recommend that you

install or service your display yourself.

Installing or servicing the product may

expose you to risk of electric shock or other

hazards. Refer all installation and servicing

of your display to authorized Pioneer service

personnel.

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wiring

to remain exposed.

• Do not drill a hole into the engine

compartment to connect the yellow lead

of the unit to the vehicle battery. Engine

vibration may eventually cause the insulation

to fail at the point where the wire passes from

the passenger compartment into the engine

compartment. Take extra care in securing the

wire at this point.

• It is extremely dangerous to allow the display

lead to become wound around the steering

column or gearshift. Be sure to install the

display in such a way that it will not obstruct

driving.

• Make sure that wires will not interfere with

moving parts of the vehicle, such as the

gearshift, parking brake or seat sliding

mechanism.

• Do not shorten any leads. If you do, the

protection circuit may fail to work properly.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR

IS DESIGNED TO DETECT PARKED STATUS

AND MUST BE CONNECTED TO THE POWER

SUPPLY SIDE OF THE PARKING BRAKE SWITCH.

IMPROPER CONNECTION OR USE OF THIS

LEAD MAY VIOLATE APPLICABLE LAW AND MAY

RESULT IN SERIOUS INJURY OR DAMAGE.

Connecting the units

Note

• This unit cannot be installed in a vehicle without

ACC (accessory) position on the ignition switch.

ACC position No ACC position

• Use this unit in other than the following

conditions could result in fire or malfunction.

—Vehicles with a 12-volt battery and negative

grounding.

—Speakers with 50 W (output value) and 4 ohm

to 8 ohm (impedance value).

• To prevent short-circuit, overheating or

malfunction, be sure to follow the directions

below.

—Disconnect the negative terminal of the

battery before installation.

—Secure the wiring with cable clamps or

adhesive tape. To protect the wiring, wrap

adhesive tape around them where they lie

against metal parts.

—Place all cables away from moving parts, such

as gear shift and seat rails.

—Place all cables away from hot places, such as

near the heater outlet.

—Do not pass the yellow cable through a hole

into the engine compartment to connect to a

battery.

—Cover any disconnected cable connectors with

insulating tape.

—Do not shorten any cables.

—Never cut the insulation of the power cable of

this unit in order to share the power to other

equipment. Current capacity of the cable is

limited.

—Use a fuse of the rating prescribed.

—Never wire the speaker negative cable directly

to ground.

—Never band together multiple speaker’s

negative cables.

• Control signal is output through blue/white cable

when this unit is powered on. Connect it to an

external power amp’s system remote control or

the vehicle’s auto-antenna relay control terminal

(max. 300 mA, 12 V DC). If the vehicle is equipped

with a glass antenna, connect it to the antenna

booster power supply terminal.

• Never connect blue/white cable to external power

amp’s power terminal. Also, never connect

it to the power terminal of the auto antenna.

Otherwise, battery drain or malfunction may

result.

• IP-BUS connectors are color-coded. Be sure to

connect connectors of the same color.

• Black cable is ground. This cable and other

product’s ground cable (especially, high-current

products such as power amp) must be wired

separately. Otherwise, fire or malfunction may

result if they are accidentally detached.

Connecting the units

English

Parts supplied

This product Power cord USB cable

Frame Flush surface screw

(5 mm × 8 mm) (8 pcs.)

Binding screw

(5 mm × 8 mm) (8 pcs.)

Touch panel pen

Connecting the units

Connecting the power cord





















Yellow

Connect to the constant 12 V supply terminal.

Fuse resistor

Red

Connect to terminal controlled by ignition switch (12 V DC).

Black (chassis ground)

Connect to a clean, paint-free metal location.

Left Right

Front speaker Front speaker

Rear speaker or

Subwoofer (4 Ω)

White Gray

Gray/blackWhite/black

Green Violet

Green/black Violet/black

Violet

Violet/black

Not used.

Green

Green/black

When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not

connect anything to Green and Green/black leads.

Subwoofer (4 Ω)

× 2

Rear speaker or

Subwoofer (4 Ω)

Fuse (10 A)

Antenna input

Orange/white

Connect to lighting switch terminal. Fuse resistor

This product

Use a mini plug cable to

connect with auxiliary

device.

AUX jack (3.5 ø)

Connection method

1. Clamp the lead. 2. Clamp firmly with

needle-nosed pliers.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Light green

Used to detect the ON/OFF status of the parking

brake. This lead must be connected to the power

supply side of the parking brake switch.

Blue/white

Connect to system control terminal of the power amp or

auto-antenna relay control terminal (max. 300 mA 12 V DC).

Ground side

Power supply side

Parking brake

switch

Fuse resistor

With a 2 speaker system, do not connect anything to the speaker leads

that are not connected to speakers.

Note:

· Change the initial setting of this unit (refer

to the Operation Manual). The subwoofer

output of this unit is monaural.

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

When you connect the separately sold

multi-channel processor (e.g., DEQ-P8000) to

this unit, do not connect anything to the

speaker leads and system remote control

(blue/white).

Connecting the units

English

Connecting the units

When connecting to separately sold power amp

























Blue/white

Connect to system control terminal of the

power amp or auto-antenna relay control

terminal. (max. 300 mA 12 V DC).

When you connect the separately sold

multi-channel processor (e.g., DEQ-P8000) to

this unit, do not connect anything to the

speaker leads and system remote control

(blue/white).

This product

Connect with RCA cables

(sold separately)

Rear speaker

Perform these connections when

using the optional amplifier.

System remote control

Front speaker Front speaker

Left Right

Front output

When you connect the multi-channel processor

to this unit, refer to multi-channel processor’s

installation manual for the connection method.

Rear speaker

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Subwoofer Subwoofer

Rear output

Subwoofer output

To front output

To rear output

To subwoofer

output

English

Connecting the units

When connecting with supplied USB cable

This product

1.5 m (4 ft. 11 in.)

USB cable

Connect to sparately sold

USB device.

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

Blue

IP-BUS input

1.5 m (4 ft. 11 in.)

When connecting with optional CD-IU200V cable

This product

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

Dock connector

Interface cable

(CD-IU200V) (sold separately)

iPod with video capabilities

(sold separately)

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

1.5 m (4 ft. 11in.)

IP-BUS input

USB input

AUX input (AUX IN)

1.5 m

(4 ft. 11in.)

USB cable

Connecting the units

When connecting with a rear view camera

When this product is used with a rear view camera, it is possible to automatically switch

from the video to rear view image when the gear shift is moved to REVERSE (R).

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY

RESULT IN INJURY OR DAMAGE.

CAUTION

• The screen image may appear reversed.

• The rear view camera function is to be used as an aid for backing into a tight parking spot.

Do not use this function for entertainment purposes.

• Objects in the rear view may appear closer or more distant than they actually are.

RCA cable

(sold separately)

To video output

Rear view camera

Rear view camera input

(REAR CAMERA IN)

This product

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

You must use a camera

which outputs mirror

reversed images.

CAUTION

Fuse resistor

• It is necessary to set Camera Polarity properly in System Menu when connecting the rear

view camera.

Andere Handbücher für Super Tuner IIID AVH-P4100DVD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Auto-Videosystem Handbücher

Pioneer

Pioneer AVH-P6800DVD - DVD Changer With LCD Monitor Bedienungsanleitung

Pioneer

Pioneer AVH-A3100DAB Technisches Handbuch

Pioneer

Pioneer AVH-P7850DVD Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVIC-X710BT Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVH-P3100DVD Bedienungsanleitung

Pioneer

Pioneer DMH-WT8600NEX Bedienungsanleitung

Pioneer

Pioneer CDX-FM673 Bedienungsanleitung

Pioneer

Pioneer AppRadio SPH-DA100 Bedienungsanleitung

Pioneer

Pioneer AVH-Z5200DAB Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer AVH-P6400 Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVIC-F7010BT Bedienungsanleitung

Pioneer

Pioneer AVH-A3200DAB Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer DEH-P55BT/XN/EW5 Bedienungsanleitung

Pioneer

Pioneer MVH-AV290BT Bedienungsanleitung

Pioneer

Pioneer Super Tuner III D AVH-P6650DVD Bedienungsanleitung

Pioneer

Pioneer AVIC-Z1000D11-CHU Bedienungsanleitung

Pioneer

Pioneer DVH-P5000MPUC Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVH-P4000DVD Bedienungsanleitung

Pioneer

Pioneer AVH-X8500BHS Bedienungsanleitung

Pioneer

Pioneer AVX-P7300DVDUC Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID+ AVH-P7800DVD Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVH-P5000DVD Bedienungsanleitung

Pioneer

Pioneer AVIC N1 - Navigation System With DVD player Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVH-P4000DVD Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung