Pioneer KJR-12BP-F Bedienungsanleitung

WIRE CONTROLLER OF AIR CONDITIONER

MODEL: KJR-12B/DP(T)-F

Thank you very much for purchasing our product.

Before using your unit, please read this manual carefully and keep it for future reference.

OWNER’ S MANUAL

●This manual gives detailed description of the precautions

that should be brought to your attention during operation.

●In order to ensure correct service of the wired controller

please read this manual carefully before using the unit.

●For convenience of future reference, keep this manual

after reading it.

CONTENTS

1. SAFETY PRECAUTION.............................................................................. 1

2. SUMMARIZE............................................................................................... 2

3. FUNCTION SUMMARY............................................................................... 2

4. NAME AND FUNCTION OF INDICATORS ON THE WIRE

CONTROLLER............................................................................................ 3

5. INSTALLATION METHOD........................................................................... 4

6. NAME AND OPERATION OF THE BUTTON ON THE WIRE CONTROL-

LER.............................................................................................................. 5

7. USING METHOD ........................................................................................ 7

AUTOMATIC OPERATION......................................................................... 7

COOLING/HEATING/FAN ONLY OPERATION.......................................... 7

DRY OPERATION....................................................................................... 8

TIMER SETTING........................................................................................ 8

TIMER ON AND TIMER OFF BOTH........................................................... 8

CHANGE TIMER......................................................................................... 9

8.TECHNICAL INDICATION AND REQUIREMENT ...................................... 9

1. SAFETY PRECAUTIONS

The following contents are stated on the product and the operation manual,

including usage, precautions against personal harm and property loss, and the

methods of using the product correctly and safely. After fully understanding the

following contents (identifiers and icons), read the text body and observe the

following rules.

 Identifier description

Identifier Meaning

Means improper handling may lead to personal death or

severe injury.

Means improper handling may lead to personal injury or

property loss.

[Note]: 1. “Harm” means injury, burn and electric shock which need

long-term treatment but need no hospitalization

2. “Property loss” means loss of properties and materials.

arning

Caution

 Icon description

Meaninglcon

It indicates forbidding. The forbidden subject-matter is indicated in the

icon or by images or characters aside.

It indicates compulsory implementation. The compulsory subject-matter

is indicated in the icon or by images or characters aside.

Warning

arning

Please entrust the distributor or professionals to install

the unit. The installers must have the relevant know-how.

Improper installation performed by the user without perm

ission may cause fire, electric,shock, personal injury or

water leakage.

Delegate

installation

Forbid

Usage

arning

Do not spray flammable aerosol to the wire

controller directly. Otherwise, fire may occur.

Do not operate with wet hands or let water enter the wire

controller. Otherwise, electric shock may occur.

2. SUMMARIZE 3. FUNCTION SUMMARY

Usage condition: Main function:

1. Power supply: 5V DC.

2. Operation temperature:

-15°C(-5°F)~ +43°C(+109°F).

3. Operation humidity: 40%-90%, RH.

1. Connecting to indoor unit by A, B, C,

D, E termina.;

2. Button setting action mode.

3. LCD display.

4. Timer for rest time.

4. NAME AND FUCTION OF INDICATORS ON THE

CONTROLLER

When adjust setting off time or only off

time is set , the "OFF" is lighted. If on

and off timer are both set, the"ON" and

"OFF"are both lighted.

③ Follow me function:

There is a temperature sensor inside the

wire controller, after setting temperature,

it will compare the two temperatures,

and the space of wire controller will be

①Operation mode indication:

When press " MODE " button, the follow-

ing mode can be selected in circle. Auto

→Cool →Dry→Heat→Fan only→Auto.

For cooling only model,heat mode is

skipped.

② Timer :

When adjust setting on time or only on

time is set, the "ON" is lighted.

1 2

1 121 12

1 Operation mode indication 3 Follow me function

4 ON/OFF indication

2 Timer ON/OFF

7 Temperature display zone

6 Lock

5 Fan speed indication

the same as setting temperature. It is

available under cooling, heating, auto

mode.

④ ON/OFF indication :

When it is on, the icon display,

otherwise it is extinguished.

⑤ Fan speed indication :

There are four fan modes : low, middle,

high, auto. For some models, no middle

fan then the middle fan is seen as high

speed.

⑥Lock:

When the " LOCK " button is pressed,

the icon appear and other buttons is

unable, press again, the icon disappear.

⑦Temperature display zone:

Generally it displays setting tempera-

ture, it can be adjusted by press

temperature button ▲and ▼. But in fan

mode, no display here.

5. INSTALLATION METHOD

5-Core Shield Cable

5-way terminal Emitter tube

Indoor Unit

RUN GND

+5V

Indoor switch board

Wire Controller

6. NAME AND OPERATION OF THE BUTTON ON THE

WIRE CONTROLLER

When a wire controller is needed, a small 5-way terminal should be added,fix an

infrared emitter with gumwater near the receiver on the switch board. Connect its

anode and cathode to A and B,and +5V, GND, RUN to C, D, E on the switch board.

MODE BUTTON

TIMER ON BUTTON

FOLLOW ME BUTTON

TIMER OFF BUTTON

ELECTRICAL

HEATER BUTTON

RESET BUTTON

ON / OFF BUTTON

ADJUST BUTTON ▲

ADJUST BUTTON ▼

SWING BUTTON

ECONOMY BUTTON

FAN SPEED BUTTON

LOCK BUTTON

TIMER

OFF

AUXIL

HEATER MODE

RESET LOCK

FAN SPEED

ECO

SWING TEMP

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

① Mode botton:

When press this botton,the operation

mode change as the following

sequence:

Remark: For the cooling only model, the

heating mode is skipped.

② Timer on button :

Press this button, timer on function is

active. Then every press, the time

increase 0.5h, after 10h, 1h increase-

ment after each press. If cancel this

Function,just set it to "0.0" .

③ Timer off button:

Press this button, timer off function is

active.Then every press, the time

increase 0.5h, after 10h, 1h increase-

ment after each press. If cancel this

function, just set it to "0.0" .

④ Follow me button:

When under cool, heat and auto mode,

press this button, follow me function is

active. Press again, this function is

ineffective.

⑤ Electrical heater button :

If press this button in heat mode, electri-

cal heater function become ineffective.

⑥Reset button(hidden):

Use a 1mm stick to press in the little hole ,

then the current setting is canceled . The

wire controller enter into original state.

⑦ON/OFF button:

When in off state, press this button, the

indicator is on, the wire controller enter

into on state, and send setting information

to in door Pcb. When in on state,press this

button, the indicator is off, and send

instruction. If timer on or timer off has

been set, it concel this setting then send

instruction to stop the machine.

⑧ Adjust button ▲:

Set indoor temperature up. If press and

hold on, it will increase at 1°C(2°F) per

0.5 second.

⑨ Adjust button ▼:

Set indoor temperature down . if press

and hold on,it will decrease at 1°C(2°F)

per 0.5 second.

→AUTO →COOL→DRY→HEAT→FAN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Controller Handbücher

Pioneer

Pioneer SEP C1 - Software Entertainment Controller Montageanleitung

Pioneer

Pioneer BSG175A8R Bedienungsanleitung

Pioneer

Pioneer DDJ-RB Bedienungsanleitung

Pioneer

Pioneer “Serato DJ” DDJ-ERGO Bedienungsanleitung

Pioneer

Pioneer BI-01 Bedienungsanleitung

Pioneer

Pioneer AXM-P7650 Bedienungsanleitung

Pioneer

Pioneer DDJ-WeGO2 Gebrauchsanweisung

Pioneer

Pioneer DDJ-ERGO-v Bedienungsanleitung

Pioneer

Pioneer DDJ-SP1 Bedienungsanleitung

Pioneer

Pioneer DDJ-ERGO Gebrauchsanweisung

Pioneer

Pioneer DDJ-ERGO Bedienungsanleitung

Pioneer

Pioneer ADSA1 Bedienungsanleitung

Pioneer

Pioneer DDJ-ERGOlimited Bedienungsanleitung

Pioneer

Pioneer DDJ-ERGO-v Bedienungsanleitung

Pioneer

Pioneer DDJ-SR Bedienungsanleitung

Pioneer

Pioneer 9537EU Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch