Pioneer V7400 Bedienungsanleitung

PIONEER V7400 DVD PLAYER

REMOTE CONTROL PANEL SOFTWARE

Written by Dejan Seke

Email: [email protected]

August 2002.

INSTALATION

1. Make a folder on any drive (i.e. C:\DVDinstall)

2. Make subfolder called Support (i.e. C:\DVDinstall\Support)

3. Unzip root.zip to made folder

4. Unzip sub.zip to made subfolder

5. Run setup.exe from main folder

DESCRIPTION

The Pioneer DVD V7400 Remote Control Panel software gives independent manual control of up

to four DVD V7400 players. The players are connected to a PC through its com ports. Player’s

hardware buttons and functions of the interface at the back of the player are still operational.

FEATURES

1. Basic commands: Play, Still, Pause, Scan and Step (Stop not included as a safety feature)

2. Go To function by frame number or time that allows easy cueing to a certain point on the disk

3. 24-hour timer with one-second resolution

4. Displays current DVD information: frame number, time, remaining title time, title, chapter,

and mode. The information is always correct, no matter if DVD player is controlled by this

software or its hardware buttons or interface

5. Selectable Step/Half Play Speed option for Reverse and Forward buttons

6. Skip buttons with selectable Title/Chapter option

7. Has a selectable 25/30/Auto frame rate option for time calculation

8. Play Only option as a safety feature that will disable all commands except for the Play button

9. Allows naming each DVD frame for easier title tracking

10. Has three viewing modes: standard, dual and compact

DESCRIPTION

All the controls and DVD information are independent for each DVD player.

A. DVD Number with DVD Title

By double clicking a DVD control frame (but not the controls on it) a widow will pop-up

allowing naming and editing DVD title. Up to 20 characters allowed.

B. Start Time

Sets the time that will make DVD player go to play mode. If incorrect time was entered, once

the box loses focus (by pressing anything else), its background will turn orange. Timer has

one-second resolution.

C. Current Frame

Displays current frame number. The current frame number is received from DVD player. If

any button on DVD player is pressed or its interface is used, program will follow and display

incoming frame number.

D. Elapsed Time

Displays elapsed time. The elapsed time is received from DVD player. If any button on DVD

player is pressed or its interface is used, program will follow and display incoming elapsed

time.

E. Remaining Time

Displays time remaining to the end of current title. It is being calculated out of total frame

number, current frame and current frame rate (25(PAL), 30 (NTSC) or Auto)

F. DVD Controls

In order: Scan Reverse, Step Reverse, Play, Still, Pause, Step Forward, Scan Forward.

Pressing Play, Stop or Pause will illuminate them to mark the mode of DVD player. If any

button is pressed on the DVD player device or its interface is used, appropriate button will

illuminate to mark current mode (Play, Still and Stop only)

G. DVD View Selection Buttons

Available in compact view only. In Dual View mode (not shown), two DVD control frames

are displayed next to each other (left-right). Displayed DVD number can be chosen from the

menu or with function keys (F1-F4 for the left side and F5-F8 for the right). Not two same

DVD control frames can be shown on both sides. For both modes, dual and compact, timer

function is operational even if DVD control is not visible.

H. Step Mode Control

Selects Frame or ½ Play speed mode for Step Reverse/Step Forward buttons. DVD’s Rev

Step/Rev Play mode has to be set to Frame (available in DVD menus)

I. Title/Chapter Control

Controls Title/Chapter selection and displays current Title and Chapter number

J. Cue Control

Consists of three items: Go To Button, Time Box and Frame Box. The program does not

allow entering frame number and time in the same time. Typing time will automatically delete

Frame Box and vice versa. If incorrect time is typed into Time Box (i.e. 023:68), a warning

message box will appear. Pressing Go To button will put player into search mode. Time or

Frame number should be found in less than three seconds. If Frame and Time Boxes are

blank, Go To button does not have any function. Pressing ‘Space’ on the keyboard when

having cursor on either Frame or Time Box will delete their contents. ‘Backspace’ button is

available only when the cursor is at the end of the text (time or frame number)

K. Safety Features

Consists of two check boxes. Play Only will disable all the controls except for the Play

button, and Timer will enable Play at given time

Setup window:

L. Com Port Number

Have values ‘OFF’, which will disable the appropriate DVD control frame, and numbers from

1 to 8. If number is set to non-existing port, error message appears. Two DVD controls cannot

have the same port number. Default value for all DVD control frames is ‘OFF’

M. Com Selection Buttons

Used to set com value

N. Frame Rate Selection

Selects frame rate by which remaining title time is calculated. Auto is calculated by dividing

current frame and elapsed time. If result is less than 27 frames, 25 (PAL) frame rate is taken,

if more 30 (NTSC) frame rate is taken.

SETTINGS

The baud rate should be set to 4800bps.

In case Rev Step/Rev Play option in DVD player’s menu is set to VOBU, reverse step/play will

not work properly. For example, reverse step will not be one but about five frames. To solve this

problem, set Rev Step/Rev Play option to Frame.

Inhaltsverzeichnis

Andere Pioneer DVD-Player Handbücher

Pioneer

Pioneer DV-47A Elite Bedienungsanleitung

Pioneer

Pioneer DV-414 Bedienungsanleitung

Pioneer

Pioneer DV-533 Bedienungsanleitung

Pioneer

Pioneer DVD-V7200 Bedienungsanleitung

Pioneer

Pioneer C503 - DV - DVD Changer Bedienungsanleitung

Pioneer

Pioneer DV320K - MULTISYSTEM REGION FREE DVD PLAYER.ALL REGIONS... Bedienungsanleitung

Pioneer

Pioneer DV-420V-K Bedienungsanleitung

Pioneer

Pioneer DV-575A-S Bedienungsanleitung

Pioneer

Pioneer DV-266-S Bedienungsanleitung

Pioneer

Pioneer DV-989AVi-S Bedienungsanleitung

Pioneer

Pioneer DV-C505 Bedienungsanleitung

Pioneer

Pioneer DV-600AV-S Bedienungsanleitung

Pioneer

Pioneer DV-626D Bedienungsanleitung

Pioneer

Pioneer DV-285-S Bedienungsanleitung

Pioneer

Pioneer DVJ-1000 Bedienungsanleitung

Pioneer

Pioneer DV-38A Bedienungsanleitung

Pioneer

Pioneer Elite DV-05 Bedienungsanleitung

Pioneer

Pioneer DV-340 Bedienungsanleitung

Pioneer

Pioneer DV-K302CD Bedienungsanleitung

Pioneer

Pioneer DV-563A Bedienungsanleitung

Pioneer

Pioneer DV-310-K Bedienungsanleitung

Pioneer

Pioneer DV-565A-S Bedienungsanleitung

Pioneer

Pioneer DV-588A-S Bedienungsanleitung

Pioneer

Pioneer DV-S633A Bedienungsanleitung

Beliebte DVD-Player Handbücher anderer Marken

Sony

Sony DVP-F11 Bedienungsanleitung

Philips

Philips DVP3560K/F8 Bedienungsanleitung

LENCO

LENCO DVP-740 X2 Bedienungsanleitung

JVC

JVC XV-N650BEU Bedienungsanleitung

Aiwa

Aiwa XD-DV370 Bedienungsanleitung

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Bedienungsanleitung

Denon

Denon DVM-1805 - DVD Changer Bedienungsanleitung

Toshiba

Toshiba SD-3815 Bedienungsanleitung

Tevion

Tevion 44330 Bedienungsanleitung

Samsung

Samsung DVD-HD860 Bedienungsanleitung

Sylvania

Sylvania DP170SL8 Bedienungsanleitung

Toshiba

Toshiba SD-P1200 Bedienungsanleitung

JVC

JVC XV-D9000E Bedienungsanleitung

Dolby Laboratories

Dolby Laboratories CP650 Bedienungsanleitung

Philips

Philips DVD737K/931 Bedienungsanleitung

Denon

Denon DVD-5900 Bedienungsanleitung

Philips

Philips DVD 951 Bedienungsanleitung

Philips

Philips DVDR3460 Bedienungsanleitung