Pioneer DVR-A06U Bedienungsanleitung

DVD / CD WRITER

LECTEUR DE DVD / CD

DVD- / CD-WRITER

REGISTRATORE PER DISCHI DVD O CD

GRABADORA DE DISCOS DVD Y CD

DVD / CD WRITER

DVR-A06U

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Manual de instrucciones

Gebruiksaanwijzing

DANGER –

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT

EXPOSURE TO BEAM.

English

Nederlands Español Italiano Deutsch Français

FEDERAL COMMUNICATIONS COMMISSION

DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause un-

desired operation.

Product Name: DVD-R/RW DVD+R/RW CD-R/RW WRITER

Model Number: DVR-A06

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

Custormer Support Division

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810 U.S.A.

Phone: (310) 952-2820

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model

properly. After you have finished reading the instructions, put them away in a safe place for

future reference. K015 En

The Generation of Acoustical Noise Is Less Than 70dB.

(ISO7779/DIN45635)

For pluggable equipment the socket-outlet shall be installed near

the equipment and shall be easily accessible.

Location: on top of the cover.

IMPORTANT NOTICE

Record the model number and serial numbers of this

equipment below. The numbers are on the top panel.

Model No. DVR-A06U

Serial No.

Keep these numbers for future use.

H059 En

CLASS 1 LASER PRODUCT

LASER KLASSE 1

WARNING:

Handling the cord on this product or cords associated with accessories sold with the product

will expose you to lead, a chemical known to the State of California and other governmental

entities to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

English

SAFETY INSTRUCTIONS

To ensure your personal safety and to maximize the full operating potential of your Drive, read and follow

these safety precautions:

ENVIRONMENT - Please do not use the unit at places with much dust, high temperature, or high humidity.

Please use the unit at a place where it is not subjected to vibrations or shocks.

POWER - Turn off your system and attached hardware devices before installation.

READ INSTRUCTIONS - Read all safety and operating instructions before the Drive is operated.

RETAIN INSTRUCTIONS - Retain the safety and operating instructions for future reference.

FOLLOW INSTRUCTIONS - Follow all operating and use instructions.

HEED WARNINGS - All warnings must be adhered to.

CLEANING - DO NOT use liquid, aerosol cleaners, or alcohol. Use only a damp cloth to clean the exterior

housing.

WATER AND MOISTURE - DO NOT use this product near water.

POWER SOURCES - Operate this product from the type of power source indicated on the marking label. If you

are not sure of the type of power available, consult Authorized Pioneer Dealer.

OVERLOADING - DO NOT overload wall outlets and extension cords. Doing so can result in fire or electric

shock.

OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product. Touching dangerous voltage

points may cause a short resulting in fire or electric shock. Do not spill liquid of any kind on this product.

CONDENSATION - Moisture will form in the operating section of the product causing performance to be

impaired if it is brought from cool surroundings into a warmer environment. If you are moving the unit to a

location with a warmer temperature, let the product stand for 1-2 hours in the new location before turning it

back on.

SERVICING - Do not attempt to repair this product yourself. Opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel. (Refer to the enclosed

Service and Support Card.)

÷Remove dust or lint from the disc with a soft cloth by

wiping from the inside to the outside edge rather than in

a circular motion.

÷Do not use record-cleaning or anti-static agents as the

solutions may cause damage to a disc.

Always be sure to store your discs in proper DVD-R storage

cases when not in use, and always be sure to check for dirt

or dust on discs (especially on the recording side) before use.

÷Avoid touching or scratching the signal surface (shiny

side) of the disc.

÷Hold the disc by the edges or by the center hold and one

edge.

÷Do not affix paper or labels to the disc.

÷Discard warped or cracked discs as they may cause

damage to the drive.

÷Avoid specially shaped discs such as hearts or polygons.

• Write Speed

CLV 1X and 2X at DVD-R

CLV 1X, 2X and 4X at High-Speed DVD-R

CLV 1X at DVD-RW

CLV 1X and 2X at High-Speed DVD-RW

CLV 2.4X at DVD+R

CLV 2.4X and 4X at High-Speed DVD+R

CLV 2.4X at DVD+RW

CLV 4X, 8X, 12X and 16X at CD-R

CLV 4X at CD-RW

CLV 4X and 10X at High-Speed CD-RW

• Maximum Read Speed

CAV 12X at DVD-ROM (single)

CAV 8X at DVD-ROM (dual)

CAV 6X at DVD-R, DVD-RW, DVD+R, DVD+RW

CAV 32X at CD-ROM, CD-R, CD-RW

• Buffer Memory Size :

2 MBytes (Write/Read)

• IDE Data Transfer Mode :

PIO Mode 4/Multi Word DMA Mode 2/Ultra DMA Mode 2

• Supports Video CD

• 5.25inch Half-Height built in type

• Stereo Audio Output

• LCD Tilt Servo Mechanism

• Horizontal/Vertical orientation available

• Low vibration Mechanism by DRA system

• Supports CD text format

Disc Format (Read/Write)

• DVD single layer/dual layer /120 mm disc/80 mm disc

• DVD-R (In case of write, 650nm disc for General only.)

• High-Speed DVD-R (4X-SPEED DVD-R Version 1.0)

• DVD-RW

• High-Speed DVD-RW (2X-SPEED DVD-RW Version 1.0)

• DVD+R (Version 1.0)

• High-Speed DVD+R (4X-SPEED DVD+R Version 1.1)

• DVD+RW (Version 1.1)

• CD-ROM Mode 1

• CD-ROM XA Mode2 (form 1, form2)

• Photo CD (single and multiple session)

• CD-DA

• CD-Extra (CD PLUS)

• CD-R

• CD-RW, High-Speed CD-RW

Note:

Specific application program that support above format is needed to write.

FEATURES

English

ABOUT REGION CODES

The region code can be changed ONLY 5 times, including the 1st setting. Please be

aware the 5th change will be PERMANENT, therefore, please pay attention when

changing region codes.

÷Region codes are part of the DVD Standard. However, Region codes on DVD

discs are optional. DVD discs with no specified Region code can be played on all

players.

INTERFACE

FRONT VIEW

1Forced Ejection Hole

Insert a stiff rod into the hole and push to eject the tray when the tray doesn’t unload by

pressing the Eject button. In the normal operation, the eject button should be used to unload

the tray. Make sure the power of the drive is turned off and wait more than one minute till the

disc rotation is stopped when access the eject hole.

2BUSY Indicator

Operation status is indicated as follows.

During reading Lights

During writing Lights

3Ventilation Hole

Do not block this part.

4Eject Button (0)

To unload /load the disc, press the button.

5Disc Tray

Open the loading tray by pressing the eject button, then place a CD or DVD disc into the slit

with the label facing up.

Press the eject button or push the front part of tray to load the tray with the disc.

Do not attempt to pull out the disc tray forcibly.

Precautions on playing 8 cm (3.15") Discs

An 8 cm (3.15") disc cannot be played even an adapter is attached to the disc when the drive is

upright condition.

BUSY

INTERFACE

REAR VIEW

Pin Name Function

1 L Left channel audio output.

2 G Ground.

3 G Ground.

4 R Right channel audio output.

Pin Name Function

1 MA on The drive is used in master mode.

2 SL on The drive is used in slave mode.

3 CS on Using Cable Select function.

4 Reserved.

5 Reserved.

6Audio Output

This is a connector for output of analog audio.

This connector is compatible with `Molex 70553`, choose a suitable connection cable.

Pin Name Function

1 +12 Power supply input for DC +12 V.

2 G Ground.

3 G Ground.

4 +5 Power supply input for DC +5 V.

7Device Configuration Jumper

Switch becomes ON when short socket is put.

Make sure the power of the drive is off before changing jumper setting.

Pin # 1 is ON at the time of shipping from the plant.

8Host IDE Interface

This is a 40 pin I/O connector according to the ATA specifications.

9DC Input

6 7 98

ANLOG AUDIO

CABLE SELECT

SLAVE

MASTER

5V G G 12V

ALS

SC IDE INTERFACE

DC INPUT

English

1Turn off the power of the personal computer and remove the power cord from the

AC outlet, then remove the cover or the front panel.

2Remove the blank panel installed on the front of the 5.25 inch slot.

3Install the fixing slide rails on the drive. (When slide rails are required, please contact

your shop or the computer manufacturer.)

4Insert the drive into the slot.

5When fixing is required, please refer to the instruction manual for the computer.

÷Please use screws with a length of 5 mm (3/16 in.) or less for mounting. Using

longer screws may cause damage on the drive.

÷When the mounting screws are loose etc., the vibrations from disc rotation may

generate ripping noise, to prevent it the screws should be tightened securely.

INSTALLATION

÷Turn off the power supply of the personal computer.

÷Connect the power cable from the personal computer. At the time of connection,

pay attention to the polarity of the cable.

÷Connect the IDE interface cable. At this time, confirm that pin 1 of the IDE connector

of the drive is connected correctly to pin 1 of the cable.

÷When a sound card is being used, connect the audio output with an audio cable to

the sound card.

Be sure to supply electrical power for this product from the personal computer

which is connected to it. Do not use any other power supply than the internal one

of the personal computer.

CONNECTIONS

Pin 1

Power cable

Audio Cable

IDE Interface cable

25V G G 12V

DC INPUT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Pioneer DVD-Recorder Handbücher

Pioneer

Pioneer DVR-420H-S Bedienungsanleitung

Pioneer

Pioneer PRV-9200 Bedienungsanleitung

Pioneer

Pioneer DVR-65H-S Bedienungsanleitung

Pioneer

Pioneer PRV-LX1 Technisches Handbuch

Pioneer

Pioneer DVR-550H-S - Multi-System DVD Recorder Bedienungsanleitung

Pioneer

Pioneer DVR-5100H Bedienungsanleitung

Pioneer

Pioneer DVR-660H-S Bedienungsanleitung

Pioneer

Pioneer PRV-LX1 Technisches Handbuch

Pioneer

Pioneer DVR-541H-S Bedienungsanleitung

Pioneer

Pioneer DVR-RT501-S Bedienungsanleitung

Pioneer

Pioneer PRV-LX1 Bedienungsanleitung

Pioneer

Pioneer DVR-LX60D Bedienungsanleitung

Pioneer

Pioneer DVR-920H Bedienungsanleitung

Pioneer

Pioneer DVR-230-AV Bedienungsanleitung

Pioneer

Pioneer PRA-BD11 Bedienungsanleitung

Pioneer

Pioneer DVR-220-S Bedienungsanleitung

Pioneer

Pioneer PRV-9000 Handbuch

Pioneer

Pioneer PRV-LX1 Leitfaden

Pioneer

Pioneer DVR-555HX-S Bedienungsanleitung

Pioneer

Pioneer DVR-560HX-K Bedienungsanleitung

Pioneer

Pioneer DVR-532H-S Bedienungsanleitung

Pioneer

Pioneer DVR-5100H-S Bedienungsanleitung

Pioneer

Pioneer DVR-640H-S Bedienungsanleitung

Pioneer

Pioneer DVR-K17 Bedienungsanleitung

Beliebte DVD-Recorder Handbücher anderer Marken

Sony

Sony RDR-VX525 - DVDr/ VCR Combo Bedienungsanleitung

Daewoo

Daewoo DHD-4000D Bedienungsanleitung

Medion

Medion MD 40570 Bedienungsanleitung

Philips

Philips ShowView DVDR3460H Bedienungsanleitung

Sony

Sony RDR-GX355 - Tunerless DVD Recorder Bedienungsanleitung

Sony

Sony DVDirect VRD-MC3 Bedienungsanleitung

Samsung

Samsung DVD-R130/XAA Bedienungsanleitung

FUNAI

FUNAI HD-B2735 Bedienungsanleitung

Panasonic

Panasonic DMR-EH54DEG Bedienungsanleitung

Sanyo

Sanyo DRW-1000 Bedienungsanleitung

Philips

Philips DVDR610/05 Bedienungsanleitung

JVC

JVC DR-M10 Bedienungsanleitung

Samsung

Samsung SV-DVD40 Bedienungsanleitung

Philips

Philips DVDR3355 Bedienungsanleitung

FUNAI

FUNAI FDR-90E Bedienungsanleitung

LG RC298 Bedienungsanleitung

Samsung

Samsung DVD-R130 Bedienungsanleitung

Philips

Philips DD-A110GX Bedienungsanleitung