Pioneer PDP-501HD Service-Handbuch

PPIONEERIONEER PPLASMALASMA DDISPLAYISPLAY SSYSTEMYSTEM

QUICK REFERENCE MANUAL

PDP-501HD: PLASMA DISPLAY PANEL

PDP-501R: MEDIA RECEIVER

PDP-501S-LR: SPEAKERS

TTABLE OFABLE OF CCONTENTSONTENTS

1.0 CHOOSE THE INSTALLATION SITE...........................................................................................2

2.0 SET UP THE DISPLAY & THE MEDIA RECEIVER ........................................................................2

3.0 MOUNT THE SPEAKERS ON THE DISPLAY ................................................................................3

4.0 SECURE THE DISPLAY TO A BASE AND/OR A WALL ..................................................................4

5.0 THE MEDIA RECEIVER...........................................................................................................5

6.0 THE PLASMA DISPLAY ..........................................................................................................7

7.0 WIRING DIAGRAM.................................................................................................................8

8.0 OPERATING INSTRUCTIONS..................................................................................................10

9.0 THE REMOTE CONTROL UNIT...............................................................................................11

Quick Start Installation Instructions

Page 2

1. CHOOSE THE INSTALLATION SITE

2. SET UP THE DISPLAY & THE MEDIA RECEIVER

The installation site should provide the best combination of the following properties:

üBoth units are positioned away from direct sunlight

üThe Plasma Display has sufficient ventilation

(approximately 8” or more on all sides)

üDistance between the display and the media receiver does not exceed the

length of the provided cable

(contact your Pioneer Representative if additional distance is needed)

1) Unpack the Media Receiver and remove all packing materials from the area

2) Position the Media Receiver

3) Unpack the Display and remove all packing materials from the area

(the display is extremely fragile and very heavy, at least 2 people are required)

4) Position the Display

The Media Receiver produces significant heat. Please do not put any

objects on top of the unit or block the ventilation flow.

The enclosed stand is designed to safely support the Plasma Display.

Only a qualified technician should attempt to remove the stand or any

other components from the Display.

Quick Start Installation Instructions

Page 3

3. MOUNT THE SPEAKERS ON THE DISPLAY

1) Remove the 2 screws from the hole-plugs on each side

of the Display

(1st and 2nd hole-plugs from the bottom)

2) Connect the brackets to the speakers

(re-attach the small cushion pads if necessary)

3) Mount the speakers on the Display from the bottom

bracket to the top

(Set all screws in place before tightening the brackets to the Display)

4) Hold the speakers firmly against the Display while

tightening the screws

(do not over-torque the mounting screws)

5) Attach the speaker wire-retaining clip as noted in the

drawing

Speakers should not be used as handles to move the Display. To move

the unit, hold the bottom corners while stabilizing the top.

Pressing on the front cover of the speakers may cause damaged.

Avoid inserting objects or fingers into the speaker grill.

Quick Start Installation Instructions

Page 4

4. SECURE THE DISPLAY TO A BASE AND/OR A WALL

Follow the instructions listed below to secure the Display to a wall:

1) Remove the Securing hole-plugs from the upper

corners of the Display

2) Affix a support bolt and cable to either securing

hole on the Display

(contact your Pioneer Representative for purchase

information)

3) Fasten the end of the cable to a pillar or a wall

(some walls may require hooks sunk into an internal support

structure)

4) Repeat the process for the opposite side if needed

for additional support

Follow the instructions listed below to secure the Display to a base:

1) Position the Display on a base

(at least 1 person should support the Display at all times)

2) Place screws through the stand to the base*

(Set all screws in place before tightening the Display to the base)

3) Hold the Display while tightening the screws

(do not over-torque the base screws)

* Clamps may be substituted to avoid drilling screw holes for the Display stand.

Stand with screws Stand with clamp

Quick Start Installation Instructions

Page 5

5. THE MEDIA RECEIVER

Media Receiver PDP-501R

Stand-By Indicator

The light turns red when the Power

button is pressed and turns green

when the unit is functioning.

Open/Close the Front Door

Push the upper right corner to open the door.

Push and hold the front door to close.

Main Power Button

Push once to turn on the power.

Push again to turn off the power.

Headphone Output Terminal

Speaker automatically turns off

when this terminal is used.

Input Selector

Input options are in the following order:

TV > CS > DVD/LD > Video1 >Video 2 >

Front > HD > Computer > MUSE

Volume Controller

Change the audio with the ±± button.

TV Channel Selector

Select aTV channel with the ±± button.

Clear Button

Initialize all functions to the factory default settings

when this button is pressed for more than 2 seconds.

Front Input Selector

Select Front Input Computer and Video.

Computer Input Terminal

Computer connection

Video Input Terminal

Connect a Video Player

(i.e. Video Camera, Game Player, etc)

Quick Start Installation Instructions

Page 6

1. VF/UHF Input Terminal

connect VHF/UHF broadcasting antenna

input

10. DVD Player Input Terminal

connect DVD or LD player

2. Control Input Terminal

connect other Pioneer equipment and control

with a single remote control unit

11. MUSE Input Terminal

connect MUSE LD player

3. BS-IF Input Terminal

connect BS (Broadcasting-Satellite) antenna

input

12. Y/Pb/Pr Input Terminal

connect HD player

4. M-N Converter Input Terminal

connect MUSE to NTSC converter 13. Computer Input Terminal

15pin for Video signal & RCA pin for Audio signal

5. BS Decoder Output

connect BS (Broadcasting-Satellite) decoder 14. MUSE Decoder Output Terminal

connect to MUSE VCR, etc

6. BS Decoder Input Terminal

connect BS (Broadcasting-Satellite) decoder 15. System Cable Terminals

15D-sub pin/4 pin Din/8 pin to Plasma display

and Speaker cables to Speakers

7. CS Input Terminal

connect another VCR or CLD player, etc

in/output

16. Audio In/Output Terminal

connect to an audio amplifier

8. Video 1 In/Output Terminals

connect VCR deck in/output 17. Sub-Woofer output Terminal

connect to a powered sub-woofer

9. Video 2 In/Output Terminal

connect another VCR or CLD player, etc

in/output

Quick Start Installation Instructions

Page 7

6. THE PLASMA DISPLAY

Plasma Display PDP-501HD

Stand-By Indicator

Light appears red when the power button is pressed

and changes to green when the unit is functional.

Speaker (PDP-501S-LR)

Install Left and Right Speakers

Main Power Switch

Turn the power ON and OFF.

Quick Start Installation Instructions

Page 8

7. WIRING DIAGRAM

The wiring instructions for the Media Receiver, Plasma Display and the Speakers are

shown below:

Connect the System Cable to the Media Receiver (PDP-501R). Then, connect the short

Speaker Cable to the Media Receiver.

NOTE: DO NOT plug in the Power Cable before all other cables are connected to the units.

Rear Side of the Media Receiver (PDP-501R)

USE 100VAC ONLY

Use separately packaged

step-down transformer to

convert 220-240V to 100V

Remember to connect

the GND cable

Connectors from Left to Right:

A) to 8pin DIN Control Output

B) to 4pin DIN Video 1 Output

C) to 15pin D-Sub Video 2 Output

D) Ground (GND)

E) to Left Speaker Terminals

(tied black and white cables)

F) to Right Speaker Terminals

(tied black and red cables)

AB C D EF

Tighten screws

after connecting

Quick Start Installation Instructions

Page 9

Connect the System Cable to the Plasma Display (PDP-501HD).

Rear side of the Plasma Display (PDP-501HD)

NOTE: DO NOT plug in the Power Cable before all other cables are connected to the units.

USE 100VAC ONLY

Use separately packaged

step-down transformer to

convert 220-240V to 100V

Tighten screws

after connecting

Remember to connect

the GND cable

Connectors from Left to Right:

A) to Right Speaker Terminals

(tied black and red cables)

B) to 15pin D-Sub Video 2 Output

C) Ground (GND)

D) to 8pin DIN Control Output

E) to 4pin DIN Video 1 Output

F) to Left Speaker Terminals

(tied black and white cables)

AB C D EF

Please refer to the drawing to locate correct terminals.

Quick Start Installation Instructions

Page 10

8. OPERATING INSTRUCTIONS

To turn on the PDP-501 system, following the instructions listed below:

Color of the Indicator

Turn on the power in following order only Media Receiver Plasma Display

Turn the power ON to the Media Receiver Flashing Yellow

1No Action

Turn the power ON to the Plasma Display Flashing Yellow

to Green Green

Once both units have been turned ON, continue with the procedure

Press the Power On button on the Remote Control Green to Red Green to Red

The PDP-501 is now in Stand-By mode

To turn the power OFF, press the main buttons on the Media Receiver and the Display

NOTE: The system will automatically enter Stand-By mode if no signals are received

within 8 minutes.

NOTE: If the main power is switched off to either the Media Receiver or the Plasma

Display, the appropriate indicator light flashes yellow.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Monitor Handbücher

Pioneer

Pioneer AVH-289BT Bedienungsanleitung

Pioneer

Pioneer PDP-42MVE1 Bedienungsanleitung

Pioneer

Pioneer Elite PRO-1000HDI Bedienungsanleitung

Pioneer

Pioneer PDU-50WX2 Bedienungsanleitung

Pioneer

Pioneer PDP-50MXE1 Bedienungsanleitung

Pioneer

Pioneer PDP-5010FD Bedienungsanleitung

Pioneer

Pioneer PDP-5010FD Bedienungsanleitung

Pioneer

Pioneer TVM-PW910T Bedienungsanleitung

Pioneer

Pioneer PDP-502MXE Bedienungsanleitung

Pioneer

Pioneer Elite PRO-810HD Bedienungsanleitung

Pioneer

Pioneer Elite PRO-FHD1 Bedienungsanleitung

Pioneer

Pioneer PDP-505PE Bedienungsanleitung

Pioneer

Pioneer PureVision PDP-427CMX Bedienungsanleitung

Pioneer

Pioneer Pure Vision PDP-425CMX Bedienungsanleitung

Pioneer

Pioneer 141FD - PRO - 59.6" Elite KURO Plasma Panel Bedienungsanleitung

Pioneer

Pioneer PDP-436SXE Bedienungsanleitung

Pioneer

Pioneer AVD-W6000 Bedienungsanleitung

Pioneer

Pioneer PDP-V401 Bedienungsanleitung

Pioneer

Pioneer PDP-504PE Bedienungsanleitung

Pioneer

Pioneer PDP-4345HD Bedienungsanleitung

Pioneer

Pioneer PDP-5040HD Bedienungsanleitung

Pioneer

Pioneer PDP-505XDE Bedienungsanleitung

Pioneer

Pioneer PDP-V401 Bedienungsanleitung

Pioneer

Pioneer NavGate HUD SPX-HUD01 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung