Pioneer PDP-5040HD Montageanleitung

Basic Operation and Troubleshooting

PDP-5040HD

PDP-4340HD

PRO-910HD

PRO-1110HD

PLASMA DISPLAY SYSTEM

Basic Operation and Troubleshooting

This manual provides information on basic operation and offers examples of

what may seem to be malfunctions.

Be sure to refer to this manual when you have a problem with operation or

before requesting repairs.

All manuals and user guides at all-guides.com

all-guides.com

All manuals and user guides at all-guides.com

Contents

Basic Operation

Confirming power supply to the Media Receiver and Plasma isplay 4

Basic remote control operation 4

Troubleshooting

General

No power. 5

No picture.

Power is cut off.

No power. 6

Power is cut off.

No picture. 7

Green and red rectangles appear on the screen alternately.

Power is cut off during extended viewing (3 hours or more). 8

No power. 9

Remote control unit does not operate.

CONVENTIONAL TV

Selection of CONVENTIONAL TV channels is not possible with

the remote control's CH(+/-) channel selection button. 10

DIGITAL TV

No display of digital TV broadcasts or EPG. 11

The Media Receiver and Plasma isplay referred to in this manual are the

P P-5040H and P P-4340H .

All manuals and user guides at all-guides.com

Basic Operation

-1

-2

-1

-2

Operate the remote control while pointing it towards the Plasma isplay's remote control sensor.

* If you switch power to the unit off, press the Plasma

isplay's POWER button.

Remote Control Sensor

Confirming power suppl to the Media Receiver and Plasma Displa

Basic remote control operation

* If the STAN BY indicators do not light even after pressing the POWER buttons, please refer to P.5.

Using these instructions is convenient until you become accustomed to operating the units.

For more details refer to the Operating Instructions.

Confirm that the Media Receiver and Plasma isplay STAN BY indicators are lit red.

If they are not lit, press the Media Receiver and Plasma isplay POWER buttons.

* Press the button with the same number and color on the

remote control.

Switch power on.

Watching conventional TV channels

Press the ANT button, and select ANTENNA.

Input the number of the desired channel, or select the

desired channel with the CH +/- button.

Watching digital TV channels

Press the TV button.

Input the number of the desired channel, or select the

desired channel with the CH +/- button.

Watching DVD and VCR images

Press the INPUT button.

Adjust volume level.

Switch power off.

POWER Button POWER Button

STAN BY Indicator STAN BY Indicator

Media Receiver

Plasma isplay

-1

-2

-1

All manuals and user guides at all-guides.com

Problem

Possible Cause

Solutions

Cause 1 Are the Plasma isplay and Media Receiver power cords disconnected? Solution 1

Is power to the Plasma Displa and Media Receiver switched on? Solution 2

Cause 2 Is the Media Receiver's power cord disconnected? Solution 3

Is power to the Media Receiver switched on? Solution 4

Cause 3 Is the Plasma isplay's power cord disconnected? Solution 5

Is power to the Plasma Displa switched on? Solution 6

Cause 4 Is the system cable disconnected or almost disconnected? Solution 7

Solution 1 Connect the Plasma isplay and Media Receiver's power cables to the power outlet.

Solution 2 Press the Plasma Displa and Media Receiver's POWER buttons to switch power on.

Solution 3 Connect the Media Receiver's power cable to the power outlet.

Solution 4 Press the Media Receiver's POWER button to switch power on.

Solution 5 Connect the Plasma isplay's power cable to the power outlet.

Solution 6 Press the Plasma Displa 's POWER button to switch power on.

Solution 7 Connect the system cable correctly. (Refer to P.7)

Problem

STAN BY/POWER ON indicator status chart

No power.

No picture

(green and red rectangles appear on the screen alternately).

No power, power is cut off.

Cause 1

Cause 2

Cause 3

Cause 4

Refer to P.6

Troubleshootin

Plasma isplay

indicators

Off

Flash red

Off

Media Receiver

indicators

Off

Flashes red

Flash alternately green and red

Indicators on either of the units

rapidly flash green or red

No power.

No picture.

Power is cut off.

POWER button

POWER ON indicator

STAN BY indicator STAN BY indicator

POWER ON indicator

POWER button

Media Receiver

Plasma isplay (front view, bottom left)

All manuals and user guides at all-guides.com

The unit's protection circuitr ma be operating.

Press the Plasma Displa and Media Receiver's POWER button to switch power

off, and wait for one minute or more before switching power on again.

If that doesn't solve the problem, be sure to disconnect the unit from the power outlet before

contacting the store where the unit was purchased. If you do not know how to contact the store or the

store is not nearby, consult with PIONEER Electronics (USA) Inc. or PIONEER Electronics of Canada,

Inc. (Refer to P.12)

Problem

Possible Cause

Solutions

Troubleshootin

No power.

Power is cut off. (Continued from P.5)

(Plasma isplay and Media Receiver indicators rapidly flash green and red.)

STAN BY indicator

POWER ON indicator

POWER button

STAN BY indicator

POWER ON indicator

POWER button

Media Receiver

Plasma isplay (front view, bottom left)

All manuals and user guides at all-guides.com

all-guides.com

Is the s stem cable disconnected or almost disconnected?

Press the Plasma isplay and

Media Receiver's POWER buttons

to switch power off, and then

confirm that the system cable is

correctly connected to each of

the units, referring to the figures

on the right. Switch power to the

units on after waitin for a

minute or more.

Plasma isplay

Problem

Possible Cause

Solutions

Troubleshootin

No picture. (Continued from P.5)

Green and red rectangles appear on the screen alternatel .

(Plasma isplay and Media Receiver indicators flash green and red

alternately.)

Press the parts marked with

to open the hooks.

Push all the way in with

the hooks opened.

Release your fingers and

confirm that the hooks

are firmly attached to the

jack clasps.

DIGITAL OUT

OPTICAL

INPUT 1

COMPONENT VIDEO

S400

DTV-ANTENNA

INPUT 3

S-VIDEO

-AUDIO-L R-AUDIO-L Y

AC INLET

BLACK

WHITE

SYSTEM CABLE

-AUDIO-L R-AUDIO-L Y

(TS)

VIDEO

Plasma isplay

(rear view)

Media Receiver (rear view)

(Almost disconnected)

System cable

All manuals and user guides at all-guides.com

Is "No Operation off" in "Power Control" of

the "HOME MENU" set to "Enable"?

Disable the Power Control No Operation off setting.

Power is cut off during extended viewing (3 hours or more).

Chan in the settin

Problem

Possible Cause

Solutions

Troubleshootin

Press the button on the

remote control to display the

HOME MENU.

Use the buttons to select

"Power Control" and press .

Use the buttons to select

"No Operation off" and press .

Use the buttons to select

" isable" and press .

Press the button to cancel

the HOME MENU.

All manuals and user guides at all-guides.com

No power.

Remote control unit does not operate.

Is the VCR controller connected to the CONTROL input jack or CONTROL

output jack?

Connect the VCR controller to the VCR CONTROL jack.

VCR or V recorder

Problem

Possible Cause

Solutions

Troubleshootin

Remote control sensor

CONTROL

OUT

SERVICE ONLY

MONITOR OUT

VCR

CONTROL

A ANTENNA/CABLE B

OUT

CONTROL

OUT

S-VIDEO

S-VIDEO R-A

R-A

VIDEO

INPUT 2

Position the light emitting

section on the VCR controller

cable so that it faces the VCR.

SERVICE ONLY

MONITOR OUT

VCR

CONTROL

A ANTENNA/CABLE B

OUT

CONTROL

OUT

S-VIDEO

S-VIDEO VIDE

VIDEO

INPUT

(Once you have positioned

the VCR controller, secure with

the tape provided.)

VCR

CONTROL

All manuals and user guides at all-guides.com

Selection of CONVENTIONAL TV channels is not possible with the remote

control's CH(+/-) channel selection button.

Has the desired CONVENTIONAL TV channel been set to Delete with

Channel ADD/DEL ?

If the desired broadcast has been set to elete with Channel A / EL, channel selection is not

possible with the remote control's CH (+/-) channel selection button.

Set the desired CONVENTIONAL TV channel to Add with Channel ADD/DEL.

Select "Channel Setup" using

the buttons, and

press .

Select "Channel A / EL"

using the buttons,

and press .

Select "Antenna" using the

buttons, and select

the desired antenna using

the buttons.

Select "Channel" using the

buttons, and select

the desired channel using the

buttons.

Select "Add/ elete" using the

buttons, and select

"Add" using the

buttons.

Press the button to

cancel the HOME MENU.

Problem

Possible Cause

Solutions

Troubleshootin CONVENTIONAL TV

Press button on the

remote control to display the

HOME MENU.

Select "Setup" using the

buttons, and press

Chan in the settin

All manuals and user guides at all-guides.com

Andere Handbücher für PDP-5040HD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Monitor Handbücher

Pioneer

Pioneer PDP-42MXE10 Benutzerhandbuch

Pioneer

Pioneer AVH-P7550DVD Bedienungsanleitung

Pioneer

Pioneer PDP-505PU Bedienungsanleitung

Pioneer

Pioneer PDP-503PU Bedienungsanleitung

Pioneer

Pioneer PRO-607PU Bedienungsanleitung

Pioneer

Pioneer PDP 503CMX Bedienungsanleitung

Pioneer

Pioneer PDP 502MX Bedienungsanleitung

Pioneer

Pioneer PDP505CMX - HD Plasma Display Bedienungsanleitung

Pioneer

Pioneer PDP-60MXE20 Bedienungsanleitung

Pioneer

Pioneer PDP-435FDE Bedienungsanleitung

Pioneer

Pioneer PDP 424MV Bedienungsanleitung

Pioneer

Pioneer 507CMX - PDP - 50" Plasma Panel Bedienungsanleitung

Pioneer

Pioneer SD-T292 Bedienungsanleitung

Pioneer

Pioneer PRO-730HD Bedienungsanleitung

Pioneer

Pioneer PDP-4345HD Bedienungsanleitung

Pioneer

Pioneer Elite PureVision PRO 940HD Bedienungsanleitung

Pioneer

Pioneer Elite KURO PRO 150FD Bedienungsanleitung

Pioneer

Pioneer PDP-4214HD Bedienungsanleitung

Pioneer

Pioneer AVD-W7900 Bedienungsanleitung

Pioneer

Pioneer PRO-507PU Bedienungsanleitung

Pioneer

Pioneer Elite PRO-950HD Bedienungsanleitung

Pioneer

Pioneer PDP-502MXE Bedienungsanleitung

Pioneer

Pioneer PDP-5000EX Bedienungsanleitung

Pioneer

Pioneer Pure Vision PDP-425CMX Handbuch

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung