Pioneer MVH-295BT Bedienungsanleitung

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\010COV_KM637ES.fm

English Español Português (B)

MVH-295BT

127075007027(B6_Horizon)

DIGITAL MEDIA RECEIVER

RECEPTOR DE MEDIOS DIGITALES

RECEPTOR DE MÍDIA DIGITAL

MVH-295BT Owner’s Manual

Manual de instrucciones

Manual do Proprietário

127075007027_artwork.book Page 1 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

Before You Start ......................................................................... 2

Getting Started .......................................................................... 3

Radio ............................................................................................ 5

USB/AUX...................................................................................... 5

Bluetooth..................................................................................... 7

Settings...................................................................................... 10

FUNCTION settings ............................................................... 10

AUDIO settings....................................................................... 10

SYSTEM settings .................................................................... 11

Connections/Installation........................................................ 12

Additional Information........................................................... 16

About this manual:

•In the following instructions, a USB memory or USB audio player are referred

to as “USB device”.

Table of Contents

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is

especially important that you read and observe WARNINGs and CAUTIONs in this manual.

Please keep the manual in a safe and accessible place for future reference.

WARNING

•Do not attempt to install or service this product by yourself. Installation or servicing

of this product by persons without training and experience in electronic equipment

and automotive accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards.

•Do not attempt to operate the unit while driving. Make sure to pull off the road and park

your vehicle in a safe location before attempting to use the controls on the device.

CAUTION

•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock

could result. Also, damage to this unit, smoke, and overheating could result from contact

with liquids.

•Always keep the volume low enough to hear outside sounds.

•This product is evaluated in moderate and tropical climate condition under the Audio,

video and similar electronic apparatus - Safety requirements, IEC 60065.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized

PIONEER Service Station.

Before You Start

127075007027_artwork.book Page 2 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

English

MVH-295BT

* This button is referred to as DISP in the manual.

Frequently used operations

Getting Started

Basic operation

Purpose Operation

Turn on the power* Press SRC/OFF to turn on the power.

Press and hold SRC/OFF to turn off the

power.

Adjust the volume Turn the M.C. dial.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DISP/DISP OFF repeatedly.

Press and hold DISP/DISP OFF to turn

off the display information.

Return to the previous display/list Press BAND/DIMMER .

SRC (source)/OFF

Detach button

Display window

M.C. (multi-control) dial

BAND/DIMMER

Display button/DISP OFF*

Hook Button

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the

antenna, turn the source off.

Display indication

Detach the front panel to prevent theft. Remove any cables and devices

attached to the front panel and turn off the unit before detaching it.

Return to the normal display from the

Press and hold BAND/DIMMER .

Answering/ending a call Press .

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the automatic answering function is set (page 9).

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 10).

Appears when random/shuffle play is set (except when BT AUDIO

and AOA).

Appears when repeat play is set (except when BT AUDIO and

AOA).

Appears when a Bluetooth connection is made (page 7).

Detaching the front panel

Purpose Operation

127075007027_artwork.book Page 3 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

Important

•Avoid subjecting the front panel to excessive shock.

•Keep the front panel out of direct sunlight and high temperatures.

•Always store the detached front panel in a protective case or bag.

When you turn the ignition switch to ON after installation, [SET UP :YES]

appears in the display.

1Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer

not to set at this time, turn the M.C. dial to select [NO], then press to

confirm.

2Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

3[QUIT :YES] appears when all the settings have been made.

Setup menu

Menu Item Description

CLOCK SET Set the clock.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

AM STEP Select the AM tuning step from 10 kHz or 9 kHz.

[10], [9]

Detach Attach

To return to the first item of the setup menu, turn the M.C. dial to select

[QUIT :NO], then press to confirm.

4Press the M.C. dial to confirm the settings.

NOTES

•You can cancel the menu setting by pressing SRC/OFF.

•These settings can be made at any time from the SYSTEM settings (page 11) and INITIAL

settings (page 4).

1Press the M.C. dial to display the main menu.

2Turn the M.C. dial to select [SYSTEM], then press to confirm.

3Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4Turn the M.C. dial to select [YES], then press to confirm.

1Press and hold SRC/OFF until the unit turns off.

2Press the M.C. dial to display the main menu.

3Turn the M.C. dial to select [INITIAL], then press to confirm.

4Turn the M.C. dial to select an option, then press to confirm.

NOTE

The options vary depending on the unit.

Canceling the demonstration display (DEMO

OFF)

INITIAL settings

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

127075007027_artwork.book Page 4 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

English

The RDS (radio data system) function only works in areas that broadcast RDS

signals for FM stations.

1Press SRC/OFF to select [RADIO].

2Press BAND/DIMMER to select the band from [FM1], [FM2], [FM3] or

[AM].

AM STEP Select the AM tuning step from 10 kHz or 9 kHz.

[10], [9]

SP-P/O MODE Select when there is a full-range speaker connected to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected

directly to the rear speaker output leads and there is a

subwoofer connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to

the rear speaker output leads and RCA output. If there is

a full-range speaker connected to the rear speaker

output leads, and the RCA output is not used, you may

select either [REAR/SUB.W] or [REAR/REAR].

DIM SETTING Change the display brightness.

[SYNC CLOCK],

[MANUAL]

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings may be retained even after

resetting the unit.)

[YES], [NO]

Radio

Receiving preset stations

Menu Item Description 3Press a number button (1/ to6/).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to

[PCH] in the FUNCTION settings (page 10).

The six strongest stations are stored on the number buttons (1/ to6/).

1After selecting the band, press the M.C. dial to display the main menu.

2Turn the M.C. dial to select [FUNCTION], then press to confirm.

3Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1After selecting the band, press / to select a station.

Press and hold / then release to seek an available station.

Scanning stops when the unit receives a station. To cancel seek tuning,

press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 10).

To store stations manually

1While receiving the station you want to store, press and hold one of the

number buttons (1/ to6/ ) until it stops flashing.

Disconnect headphones from the device before connecting it to the unit.

Best stations memory (BSM)

USB/AUX

Playing back

127075007027_artwork.book Page 5 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

USB devices (including Android)

1Open the USB port cover.

2Plug in the USB.

NOTE

To automatically switch to [USB] source when a USB device is connected to the unit, set

[USB AUTO] to [ON] in the SYSTEM settings (page 12).

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device

connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

A device installed with Android OS 5.0 or later can be connected to the unit via

AOA, using the cable supplied with the device.

This function is compatible with devices that have Android OS 5.0 or later

installed and also support AOA (Android Open Accessory) 2.0.

1Press SRC/OFF to select [ANDROID].

Listening to music on Android

AUX input jack (3.5 mm stereo jack)

USB port

SRC (source)/OFF

M.C. (multi-control) dial

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to

their own software design, regardless of the OS version.

Basic operations

AUX

1Insert the stereo mini plug into the AUX input jack.

2Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source

(page 11).

You can make various adjustments in the FUNCTION settings (page 10).

Note that the following operations do not work for an AUX device. To operate

an AUX device, use the device itself.

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PAUSE.

Operations

Purpose Operation

Select a folder/album* Press 1/ or2/.

Select a track/song (chapter) Press or .

Fast forward or reverse Press and hold or .

127075007027_artwork.book Page 6 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

English

* Compressed audio files only

1Turn on the Bluetooth function of the device.

2Press to display the phone menu.

3Turn the M.C. dial to select [BT SETTING], then press to confirm.

4Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices.

•To cancel searching, press the M.C. dial.

•If the desired device is not in the list, select [RE-SEARCH].

•If there is no device available, [NOT FOUND] appears in the display.

Search for a file from a list 1Press to display the list.

2Turn the M.C. dial to select the

desired file (folder) name or

category, then press to confirm.

3Turn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

View a list of the files in the selected

folder/category*

Press the M.C. dial when a folder/

category is selected.

Play a song in the selected folder/

category*

Press and hold the M.C. dial when a

folder/category is selected.

Repeat play Press 6/.

Random/shuffle play Press 5/.

Pause/resume playback Press 4/PAUSE.

Bluetooth

Bluetooth connection

Purpose Operation 5Turn the M.C. dial to select a device, then press to confirm.

Press and hold the M.C. dial to switch the displayed device information

between the Bluetooth device address and device name.

6Select [Pioneer BT Unit] shown in the device display.

7Make sure the same 6-digit number appears on this unit and the device,

then select “Yes” on the device.

NOTES

•Depending on the device, the PIN code is required in step 7. In this case, input [0000].

•Only one single device can be paired/registered at any one time. The previously paired/

registered phonebook and preset information is overwritten/deleted when a new device

is paired/registered to this unit.

•Disconnect a registered device in the BT CONNECT menu when you register a new device.

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth

device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a

Bluetooth device operations, refer to the operating instructions supplied with the

Bluetooth device.

Bluetooth settings

Menu Item Description

BT CONNECT Display the paired Bluetooth devices. “*” appears on the

device name when the Bluetooth connection is

established.

[ON], [OFF]

ADD DEVICE Register a new device.

A.CONN Select [ON] to connect to a Bluetooth device

automatically.

[ON], [OFF]

VISIBLE Select [ON] so that a Bluetooth device can detect the

unit when the unit is connected via Bluetooth to another

device.

[ON], [OFF]

127075007027_artwork.book Page 7 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

First, make a Bluetooth connection with the Bluetooth telephone (page 7).

Important

•Leaving the unit on standby to connect to your phone via Bluetooth while the engine is

not running can drain the vehicle’s battery.

•Be sure to park your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

1Press to display the phone menu.

2Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to

confirm.

If you select [PHONE BOOK], proceed to step 4.

3Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press

to confirm.

4Turn the M.C. dial to select a name or phone number, then press to

confirm.

The phone call starts.

PIN CODE Change the PIN code.

1Press the M.C. dial to display the setting mode.

2Turn the M.C. dial to select a number.

3Press the M.C. dial to move the cursor to the next

position.

4After inputting the PIN code, press and hold the M.C.

dial.

After inputting the PIN code, pressing the M.C. dial

returns you to the PIN code input display, and you can

change the PIN code.

DEV. INFO Switch the device information on the display between

the device name and Bluetooth device address.

Bluetooth telephone

Menu Item Description To answer an incoming call

1Press when a call is received.

Basic operations

To preset phone numbers

1Select a phone number from a phone book or call history.

2Press and hold one of the number buttons (1/ to6/).

The contact is stored in the selected preset number.

To make a call using a preset number, press one of the number buttons (1/

to 6/ ), then press the M.C. dial.

Purpose Operation

End a call Press .

Reject an incoming call Press and hold when a call is received.

Switch between the current

caller and a caller on hold

Press the M.C. dial.

Cancel a caller on hold Press and hold .

Adjust the volume of the

caller’s voice (When private

mode is on, this function is not

available.)

Turn the M.C. dial during the call.

Turn the private mode on or

off

Press BAND/ duringthecall.

127075007027_artwork.book Page 8 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

English

Phone menu

Menu Item Description

RECENTS Display the missed call history.

[MISSED]

[DIALED] Display the dialed call history.

[RECEIVED] Display the received call history.

PHONE BOOK* Display the contacts which have been transferred from

your phone. Set [VISIBLE] in the Bluetooth settings to

[ON] to browse the contacts via this unit.

PRESET 1-6 Recall the preset phone numbers. You can also recall the

preset phone numbers by pressing one of the number

buttons (1/ to6/).

A.ANSR Select [ON] to answer an incoming call automatically.

[ON], [OFF]

R.TONE Select [ON] if the ring tone does not come out from the

car speakers. Depending on the connected phone, this

function may not work.

[ON], [OFF]

PB INVT Invert the order of names in the phone book (name

view).

PB A.SYNC Select whether or not to transfer the contacts from your

phone automatically when your phone is connected to

the unit.

•When connected for the first time, the contacts from

your phone are transferred automatically, regardless of

the [PB A.SYNC] setting.

•If you switch from [ON] to [OFF], the auto

synchronization will not be performed on the next

connection.

•If you switch from [OFF] to [ON], the auto

synchronization will be performed when your phone is

connected to the unit.

•During the auto synchronization, you cannot cancel

the synchronization, even if you select [OFF].

[ON], [OFF]

* The contacts on your phone will normally be transferred automatically when the phone is

connected. If they are not, use your phone to transfer the contacts.

Important

•Depending on the Bluetooth audio player connected to this unit, the available operations

will be limited to the following two levels:

– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio

player.

– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback,

pause, select song, etc.

•The sound of the Bluetooth audio player will be muted when the phone is in use.

•When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone

automatically.

•Depending on the type of Bluetooth audio player you have connected to this unit,

operation and information displayed may vary based on availability and functionality.

1Make a Bluetooth connection with the Bluetooth audio player.

2Press SRC/OFF to select [BT AUDIO] as the source.

3Press BAND/ to start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 10).

BT SETTING You can adjust various settings for Bluetooth

connections. For details on Bluetooth settings, see

page 7.

Bluetooth audio

Purpose Operation

Fast forward or reverse Press and hold or .

Select a track Press or .

Repeat play* Press 6/.

Random play* Press 5/.

Menu Item Description

127075007027_artwork.book Page 9 Tuesday, May 31, 2016 4:50 PM

X:\print\Pioneer\ODM\127075007027(B6_Horizon)\020Chapter_EN.fm

MVH-295BT

127075007027(B6_Horizon)

* Depending on the connected device, these operations may not be available.

You can adjust various settings in the main menu.

1Press the M.C. dial to display the main menu.

2Turn the M.C. dial to select one of the categories below, then press to

confirm.

•FUNCTION settings (page 10)

•AUDIO settings (page 10)

•SYSTEM settings (page 11)

3Turn the M.C. dial to select the options, then press to confirm.

The menu items vary according to the source.

Pause/resume playback Press 4/PAUSE.

Search for a file from a list 1Press to display a list.

2Turn the M.C. dial to select the

desired folder name, then press to

confirm.

3Turn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

Settings

FUNCTION settings

Menu Item Description

BSM

Store the six strongest stations on the

number buttons (1/ to6/)

automatically.

Purpose Operation

LOCAL

FM: [OFF], [LV1], [LV2], [LV3],

[LV4]

AM: [OFF], [LV1], [LV2]

Restrict the tuning station according to the

signal strength.

SEEK

[MAN], [PCH] Assign or buttons to seek the

stations one by one (manual tuning) or

select a station from the preset channels.

PLAY

Start playback.

STOP

Stop playback.

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

Menu Item Description

127075007027_artwork.book Page 10 Tuesday, May 31, 2016 4:50 PM

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Multimedia-Empfänger Handbücher

Pioneer

Pioneer MVH-S200DAB Bedienungsanleitung

Beliebte Multimedia-Empfänger Handbücher anderer Marken

Dual

Dual DV625BH Betriebsanleitung