Pioneer PDP-5040HD Bedienungsanleitung

Basic Operation and Troubleshooting

PDP-5040HD

PDP-4340HD

PRO-910HD

PRO-1110HD

PLASMA DISPLAY SYSTEM

Basic Operation and Troubleshooting

This manual provides information on basic operation and offers examples of

what may seem to be malfunctions.

Be sure to refer to this manual when you have a problem with operation or

before requesting repairs.

Contents

Basic Operation

Confirming power supply to the Media Receiver and Plasma isplay 4

Basic remote control operation 4

Troubleshooting

General

No power. 5

No picture.

Power is cut off.

No power. 6

Power is cut off.

No picture. 7

Green and red rectangles appear on the screen alternately.

Power is cut off during extended viewing (3 hours or more). 8

No power. 9

Remote control unit does not operate.

CONVENTIONAL TV

Selection of CONVENTIONAL TV channels is not possible with

the remote control's CH(+/-) channel selection button. 10

DIGITAL TV

No display of digital TV broadcasts or EPG. 11

The Media Receiver and Plasma isplay referred to in this manual are the

P P-5040H and P P-4340H .

Basic Operation

-1

-2

-1

-2

Operate the remote control while pointing it towards the Plasma isplay's remote control sensor.

* If you switch power to the unit off, press the Plasma

isplay's POWER button.

Remote Control Sensor

Confirming power suppl to the Media Receiver and Plasma Displa

Basic remote control operation

* If the STAN BY indicators do not light even after pressing the POWER buttons, please refer to P.5.

Using these instructions is convenient until you become accustomed to operating the units.

For more details refer to the Operating Instructions.

Confirm that the Media Receiver and Plasma isplay STAN BY indicators are lit red.

If they are not lit, press the Media Receiver and Plasma isplay POWER buttons.

* Press the button with the same number and color on the

remote control.

Switch power on.

Watching conventional TV channels

Press the ANT button, and select ANTENNA.

Input the number of the desired channel, or select the

desired channel with the CH +/- button.

Watching digital TV channels

Press the TV button.

Input the number of the desired channel, or select the

desired channel with the CH +/- button.

Watching DVD and VCR images

Press the INPUT button.

Adjust volume level.

Switch power off.

POWER Button POWER Button

STAN BY Indicator STAN BY Indicator

Media Receiver

Plasma isplay

-1

-2

-1

Problem

Possible Cause

Solutions

Cause 1 Are the Plasma isplay and Media Receiver power cords disconnected? Solution 1

Is power to the Plasma Displa and Media Receiver switched on? Solution 2

Cause 2 Is the Media Receiver's power cord disconnected? Solution 3

Is power to the Media Receiver switched on? Solution 4

Cause 3 Is the Plasma isplay's power cord disconnected? Solution 5

Is power to the Plasma Displa switched on? Solution 6

Cause 4 Is the system cable disconnected or almost disconnected? Solution 7

Solution 1 Connect the Plasma isplay and Media Receiver's power cables to the power outlet.

Solution 2 Press the Plasma Displa and Media Receiver's POWER buttons to switch power on.

Solution 3 Connect the Media Receiver's power cable to the power outlet.

Solution 4 Press the Media Receiver's POWER button to switch power on.

Solution 5 Connect the Plasma isplay's power cable to the power outlet.

Solution 6 Press the Plasma Displa 's POWER button to switch power on.

Solution 7 Connect the system cable correctly. (Refer to P.7)

Problem

STAN BY/POWER ON indicator status chart

No power.

No picture

(green and red rectangles appear on the screen alternately).

No power, power is cut off.

Cause 1

Cause 2

Cause 3

Cause 4

Refer to P.6

Troubleshootin

Plasma isplay

indicators

Off

Flash red

Off

Media Receiver

indicators

Off

Flashes red

Flash alternately green and red

Indicators on either of the units

rapidly flash green or red

No power.

No picture.

Power is cut off.

POWER button

POWER ON indicator

STAN BY indicator STAN BY indicator

POWER ON indicator

POWER button

Media Receiver

Plasma isplay (front view, bottom left)

The unit's protection circuitr ma be operating.

Press the Plasma Displa and Media Receiver's POWER button to switch power

off, and wait for one minute or more before switching power on again.

If that doesn't solve the problem, be sure to disconnect the unit from the power outlet before

contacting the store where the unit was purchased. If you do not know how to contact the store or the

store is not nearby, consult with PIONEER Electronics (USA) Inc. or PIONEER Electronics of Canada,

Inc. (Refer to P.12)

Problem

Possible Cause

Solutions

Troubleshootin

No power.

Power is cut off. (Continued from P.5)

(Plasma isplay and Media Receiver indicators rapidly flash green and red.)

STAN BY indicator

POWER ON indicator

POWER button

STAN BY indicator

POWER ON indicator

POWER button

Media Receiver

Plasma isplay (front view, bottom left)

Is the s stem cable disconnected or almost disconnected?

Press the Plasma isplay and

Media Receiver's POWER buttons

to switch power off, and then

confirm that the system cable is

correctly connected to each of

the units, referring to the figures

on the right. Switch power to the

units on after waitin for a

minute or more.

Plasma isplay

Problem

Possible Cause

Solutions

Troubleshootin

No picture. (Continued from P.5)

Green and red rectangles appear on the screen alternatel .

(Plasma isplay and Media Receiver indicators flash green and red

alternately.)

Press the parts marked with

to open the hooks.

Push all the way in with

the hooks opened.

Release your fingers and

confirm that the hooks

are firmly attached to the

jack clasps.

DIGITAL OUT

OPTICAL

INPUT 1

COMPONENT VIDEO

S400

DTV-ANTENNA

INPUT 3

S-VIDEO

-AUDIO-L R-AUDIO-L Y

AC INLET

BLACK

WHITE

SYSTEM CABLE

-AUDIO-L R-AUDIO-L Y

(TS)

VIDEO

Plasma isplay

(rear view)

Media Receiver (rear view)

(Almost disconnected)

System cable

Is "No Operation off" in "Power Control" of

the "HOME MENU" set to "Enable"?

Disable the Power Control No Operation off setting.

Power is cut off during extended viewing (3 hours or more).

Chan in the settin

Problem

Possible Cause

Solutions

Troubleshootin

Press the button on the

remote control to display the

HOME MENU.

Use the buttons to select

"Power Control" and press .

Use the buttons to select

"No Operation off" and press .

Use the buttons to select

" isable" and press .

Press the button to cancel

the HOME MENU.

No power.

Remote control unit does not operate.

Is the VCR controller connected to the CONTROL input jack or CONTROL

output jack?

Connect the VCR controller to the VCR CONTROL jack.

VCR or V recorder

Problem

Possible Cause

Solutions

Troubleshootin

Remote control sensor

CONTROL

OUT

SERVICE ONLY

MONITOR OUT

VCR

CONTROL

A ANTENNA/CABLE B

OUT

CONTROL

OUT

S-VIDEO

S-VIDEO R-A

R-A

VIDEO

INPUT 2

Position the light emitting

section on the VCR controller

cable so that it faces the VCR.

SERVICE ONLY

MONITOR OUT

VCR

CONTROL

A ANTENNA/CABLE B

OUT

CONTROL

OUT

S-VIDEO

S-VIDEO VIDE

VIDEO

INPUT

(Once you have positioned

the VCR controller, secure with

the tape provided.)

VCR

CONTROL

Selection of CONVENTIONAL TV channels is not possible with the remote

control's CH(+/-) channel selection button.

Has the desired CONVENTIONAL TV channel been set to Delete with

Channel ADD/DEL ?

If the desired broadcast has been set to elete with Channel A / EL, channel selection is not

possible with the remote control's CH (+/-) channel selection button.

Set the desired CONVENTIONAL TV channel to Add with Channel ADD/DEL.

Select "Channel Setup" using

the buttons, and

press .

Select "Channel A / EL"

using the buttons,

and press .

Select "Antenna" using the

buttons, and select

the desired antenna using

the buttons.

Select "Channel" using the

buttons, and select

the desired channel using the

buttons.

Select "Add/ elete" using the

buttons, and select

"Add" using the

buttons.

Press the button to

cancel the HOME MENU.

Problem

Possible Cause

Solutions

Troubleshootin CONVENTIONAL TV

Press button on the

remote control to display the

HOME MENU.

Select "Setup" using the

buttons, and press

Chan in the settin

Andere Handbücher für PDP-5040HD

Dieses Handbuch passt für folgende Modelle

Andere Pioneer Plasma-TV Handbücher

Pioneer

Pioneer PDP-6071HD Bedienungsanleitung

Pioneer

Pioneer PDP-505XDE Bedienungsanleitung

Pioneer

Pioneer Elite PureVision PRO 1410HD Einrichtungshandbuch

Pioneer

Pioneer PDP-614MX Bedienungsanleitung

Pioneer

Pioneer HIGH DEFINITION PLASMA TELEVISION PRO1130HD Bedienungsanleitung

Pioneer

Pioneer PureVision PDP-427CMX Bedienungsanleitung

Pioneer

Pioneer PDP-5080XA Bedienungsanleitung

Pioneer

Pioneer 434CMX - PDP - 43" Plasma Panel Bedienungsanleitung

Pioneer

Pioneer PDP-5071HD Bedienungsanleitung

Pioneer

Pioneer PDP-507XC Bedienungsanleitung

Pioneer

Pioneer Elite PureVision PRO 1140HD Bedienungsanleitung

Pioneer

Pioneer PDP-507XD Bedienungsanleitung

Pioneer

Pioneer PDP-507XD Bedienungsanleitung

Pioneer

Pioneer PDP-4270XD Bedienungsanleitung

Pioneer

Pioneer PDP 503CMX Bedienungsanleitung

Pioneer

Pioneer Elite PRO-1540HD Bedienungsanleitung

Pioneer

Pioneer PureVision PDP-503HDE Bedienungsanleitung

Pioneer

Pioneer PDP-508XG Bedienungsanleitung

Pioneer

Pioneer PDP-5070HD Bedienungsanleitung

Pioneer

Pioneer PDP-5060HD Bedienungsanleitung

Pioneer

Pioneer PureVision PDP-4271HD Bedienungsanleitung

Pioneer

Pioneer KURO PDP-428XD Bedienungsanleitung

Pioneer

Pioneer pmn Bedienungsanleitung

Pioneer

Pioneer Elite PureVision PRO 1110HD Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

LG 60PA5500 Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG PJ550N Bedienungsanleitung

Samsung

Samsung PA43H4000 Bedienungsanleitung

LG 42LG70ER Bedienungsanleitung

Samsung

Samsung 7+ series Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PA60EY Bedienungsanleitung

LG DU-42PZ60H Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PX80A Bedienungsanleitung

Panasonic

Panasonic VIERA TH-P50X30D Bedienungsanleitung

Panasonic

Panasonic TH-50PX20U/P Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung