Pioneer WYD Series Bedienungsanleitung

Pioneer WYD Series

Remote Controller

Manual

For those who only want the Best!

REMOTE CONTROLLER FUNCTIONS AND SETTINGS

REMOTE CONTROL:

Controls all of the

available functions of your

system with convenience

from a remote distance.

Wall unit beeps each time

to indicate a signal was

received from the remote.

LCD DISPLAY:

Displays current settings

on the remote. Insert Two AAA Batteries.

IMPORTANT WARNING - SETTING THE REMOTE FOR

INITIAL USE AND AFTER REPLACING BATTERIES.

REMOTE CONTROL

CAN BE SET AS COOL

ONLY OR HEAT-COOL.

When the batteries are inserted, LCD screen will flash signs

next to HEAT and COOL alternately. Pressing any button while

the COOL sign is flashing sets the remote as Cool Only.

Pressing any button while HEAT sign is flashing sets as Heat-

Cool. If you do not press any button, flashing stops and

controller sets up as default to Heat-Cool Function..

Some systems are packed with a plastic wall holder for the remote controller. This part can

be bolted onto a wall to store the remote controller inside at a convenient location.

MODES OF OPERATION

System is designed to create comfortable climate

conditions based on the user’s choices for the area it is

installed in. Several modes of operation are available and

can be set as needed. These are:

a. Air Conditioning (Straight Cooling).

b. Heating (Reverse Cycle / Heat Pump).

c. Dehumidifying (Dry Mode for humidity control).

d. Ventilating (Fan Only mode for air circulation).

e. Auto (Automatic switch-over mode)

f. FEEL Mode (Default comfort settings).

Indoor air is recirculated through filters and the heat

exchanger by a powerful yet quiet cross flow fan.

Discharged air can be directed at a specific direction using

the internal deflectors and external motorized flaps.

Air Swing

(Louver Angle Control)

SWING LOUVER OPERATION

Discharged air direction can be remotely

controlled by pressing the SWING button on the

remote. Pressing the SWING button once will

activate Automatic Air Sweep mode, and the

horizontal air deflectors will start moving up and

down to constantly change the direction of the

discharged air in a sweeping action, for optimum

air distribution. An arrow, next to the word SWING

on the LCD screen will illuminate to confirm the

swing mode is ON.

Pressing the SWING button again will cancel the

Automatic Air Sweep mode and the flaps will stop

swinging and stay at their specific position at the

time the button is pressed.

If a fixed discharge position is desired for the

flaps, instead of the sweeping action, flaps can

be stopped at that desired angle using the

SWING button.

Recommended fixed flap angle for the COOL and FAN modes is an high / horizontal angle for

reaching across the room.

Recommended fixed angle for HEAT and DRY modes is a low / downward angle to prevent

creating air draft effect on people.

Never adjust the Auto Swing flaps by hand to prevent damage to the delicate driver motors.

Manually adjust the internal deflectors to direct the air in the right or left direction as desired. Do

not attempt to adjust the deflectors while the system is ON to prevent accidents.

MODES OF OPERATION

Set COOL Mode

(Press MODE Button)

COOLING MODE OPERATION

Pressing the MODE button until the arrow next

to the COOL sign on the LCD screen illuminates,

will set the system function to COOLING mode.

In cooling mode the desired room temperature

can be adjusted by pressing the UP and DOWN

arrow buttons. Display will adjust the set

temperature in 1°F increments, each time these

buttons are pressed. Temperature Adjustment

(UP: Warmer, DOWN: Cooler)

System starts if the set temperature is at least 1°F less then the actual room temperature and

cools the room until set temperature is obtained. During cooling, a significant amount of humidity

is also removed from the air automatically, for obtaining better comfort levels.

Set HEAT Mode

(Press MODE Button)

HEATING MODE OPERATION

Pressing the MODE button until the arrow next

to the HEAT sign on the LCD screen illuminates,

will set the system function to HEATING mode.

In heating mode the desired room temperature

can be adjusted by pressing the UP and DOWN

arrow buttons. Display will adjust the set

temperature in 1°F increments, each time these

buttons are pressed. Temperature Adjustment

(UP: Warmer, DOWN: Cooler)

System starts if the set temperature is at least 1°F more then the actual room temperature and

heats the room until set temperature is obtained. Hot Start function in the software delays the air

flow from the indoor unit until the indoor unit’s heat exchanger is sufficiently warmed up to

prevent cold air draft. Additionally, the system software, utilizing a self learning logic, will constantly

monitor and automatically activate a suitable defrost cycle when necessary, to melt down any

ice accumulation on the outdoor unit’s heat exchanger. Defrost cycle is entered into automatically

and can not be overridden by the user. During defrost cycle, which can last between 2~10

minutes, the indoor fan stops running automatically. At the end of the defrost cycle, the system

returns to heating mode and continues the normal heating operation.

Set “ON” Time

(Press TIMER Button

WHILE THE SYSTEM IS OFF)

TIMER “ON” SETTINGS

To set the system to automatically start, after a

certain time elapses (between 1/2 hour to 24

hours), press the TIMER button WHILE THE

SYSTEM IS IN OFF MODE. Remember to set

the desired operation mode (COOL or HEAT)

and the fan speed, prior to setting the ON timer,

then turn off the system and set the ON timer.

To cancel ON timer, press TIMER button again.

In case of power failure timer settings cancel out.

Time Adjustment

(UP: Longer, DOWN: Shorter)

MODES OF OPERATION

Set “OFF” Time

(Press TIMER Button

WHILE THE SYSTEM IS ON)

TIMER “OFF” SETTINGS

To set the system to automatically stop, after a

certain time elapses (between 1/2 hour to 24

hours), press the TIMER button WHILE THE

SYSTEM IS IN ON MODE. System will run with

current setting and turn itself OFF automatically

after the set time elapses.

To cancel OFF timer, press TIMER button again.

In case of power failure timer settings cancel out. Time Adjustment

(UP: Longer, DOWN: Shorter)

Set FAN Mode

(Press MODE Button)

FAN ONLY (VENTILATION) MODE

Pressing the MODE button until the arrow next

to the FAN sign on the LCD screen illuminates,

will set the system function to FAN ONLY

(Ventilation) mode.

In FAN mode outdoor unit is entirely deactivated

and only the indoor unit’s fan runs without any

cooling or heating effect. Temperature

adjustment button is also deactivated. However,

fan speed can still be adjusted as desired.

Temperature Adjustment

(Not Available in FAN Mode)

Set FAN Mode

(Press MODE Button)

DRY (DEHUMIDIFICATION) MODE

Pressing the MODE button until the arrow next

to the DRY sign on the LCD screen illuminates,

will set the system function to DRY

(Dehumidification) mode.

In DRY mode, system operates based on its

internally programmed software instructions and

temperature setting and the fan speed buttons

are deactivated. Entire DRY operation is

automatically controlled.

Temperature Adjustment

(Not Available in FAN Mode)

Set FEEL Mode

(Press MODE Button)

FEEL (AUTO CONTROL) MODE

Pressing the MODE button until the arrow next

to the FEEL sign on the LCD screen illuminates,

will set to system function to FEEL (Auto Control

based on below pre-programmed instructions)

mode. Temperature setting button is inactivated.

Temperature Adjustment

(Not Available in FEEL Mode)

Set “OFF” Time

(Press TIMER Button

WHILE THE SYSTEM IS ON)

SLEEP FUNCTION SETTINGS

Time Adjustment

(UP: Longer, DOWN: Shorter)

MODES OF OPERATION

Pressing the SLEEP button will illuminate the

arrow next to the SLEEP sign on the LCD screen

and set the SLEEP function on. Pressing it once

more will cancel the SLEEP mode. SLEEP mode

can be set while running COOL or HEAT Modes.

Sleep mode adjusts the set temperature to cope

with the body’s natural temperature changes

during sleep for comfortable night temperatures.

If the SLEEP mode is activated, while the system is running in COOL mode, the set temperature

will be automatically increased by 2°F within 1 hour and by 4°F within 2 hours. Similarly, if the

SLEEP mode is activated, while the system is running in HEAT mode, the set temperature will

be automatically decreased by 2°F within 1 hour and by 4°F within 2 hours. SLEEP mode will

turn the system OFF automatically after 10 hours of running in sleep mode.

SYSTEM PROTECTIONS

Any time the system is stopped, it will not restart until after a 3 minute safety time delay is

elapsed. Same time delay is also automatically activated after Mode Changes.

Additionally, the system is protected from damage, under certain extreme running conditions as

listed below. If any of these conditions is reached, the protective devices will stop the system.

FAN MOTOR SPEED SETTINGS

Fan Speed Adjustment

(Low, Med, High, Auto)

Pressing the FAN button will change the fan

motor’s speed to provide different amount of air

flow, while the system is running Cool, Heat, Feel

or Fan Only Modes. The arrow next to either

AUTO, HIGH, MED, LOW on the LCD screen

will illuminate to correspond with the currently

set fan speed.

Higher fan speed will cause slightly higher noise.

AUTO speed is automatically controlled

depending on the current conditions.

Set Fan Speed

(Press FAN Button)

Pioneer is the world’s renowned ductless air conditioning system

Pioneer products and spare parts are available for sale online through:

www.highseer.com

T: (800) 243-0340

PIONEER is a registered trademark of:

Parker Davis HVAC Systems, Inc.

2260 NW 102 Place

Doral, FL 33172 - USA

T: (305) 513-4488

F: (305) 513-4499

www.pd-hvac.com

WYD-RCM-V0411

Inhaltsverzeichnis

Andere Pioneer Fernbedienung Handbücher

Pioneer

Pioneer CD-MR70 Bedienungsanleitung

Pioneer

Pioneer CD-R5/E5 Bedienungsanleitung

Pioneer

Pioneer CD-R55 Bedienungsanleitung

Pioneer

Pioneer CD-R9 Bedienungsanleitung

Pioneer

Pioneer CD-SR100 - Remote Control - Infrared Bedienungsanleitung

Pioneer

Pioneer CD-SR80 Bedienungsanleitung

Pioneer

Pioneer passport DCT Bedienungsanleitung

Pioneer

Pioneer CD-R33 Bedienungsanleitung

Pioneer

Pioneer CD-MR80D Bedienungsanleitung

Pioneer

Pioneer CD-ME300 Bedienungsanleitung

Pioneer

Pioneer KJR-12B/DP(T)-F-1 Bedienungsanleitung

Pioneer

Pioneer RG52F3JBGEFU1 Bedienungsanleitung

Pioneer

Pioneer CD-SR90 Bedienungsanleitung

Pioneer

Pioneer EU-OSK105 Montageanleitung

Pioneer

Pioneer BR-350 Bedienungsanleitung

Pioneer

Pioneer RG57A6 Bedienungsanleitung

Pioneer

Pioneer CD-SR100 Bedienungsanleitung

Pioneer

Pioneer BR-95 Bedienungsanleitung

Pioneer

Pioneer CD-UB100/XN Bedienungsanleitung

Pioneer

Pioneer CD-MR80D/UC Bedienungsanleitung

Pioneer

Pioneer BR-360 Bedienungsanleitung

Pioneer

Pioneer CD-R510 Bedienungsanleitung

Pioneer

Pioneer UEI S4000 Bedienungsanleitung

Pioneer

Pioneer RC310TG Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung