3
<BRB1057>
READ INSTRUCTIONS – All the safety and
operatinginstructions should beread before
the appliance is operated.
RETAIN INSTRUCTIONS – The safety and
operating instructions should be retained
for future reference.
HEED WARNINGS – All warnings on the
appliance and in the operating instructions
should be adhered to.
FOLLOW INSTRUCTIONS – All operating and
usage instructions should be followed.
CLEANING – Unplug this product from the wall
outlet before cleaning. The product should
be cleaned only with a polishing cloth or a
soft dry cloth. Never clean with furniture
wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
ATTACHMENTS – Do not use attachments not
recommended by appliance manufacturer
as they may cause hazards.
WATER AND MOISTURE – Do not use this
appliance near water – for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, etc.
ACCESSORIES – Do not place this appliance on
an unstable cart, stand, tripod, bracket, or
table.The appliance may fall, causingserious
injuryto a childor adult, andserious damage
to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by
themanufacturer, or soldwith the appliance.
Anymounting of the applianceshould follow
the manufacturer's instructions, and should
use a mounting accessory recommended by
the manufacturer.
CART – An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to
overturn.
IMPORTANT SAFEGUARDS
SERVICING – Do not attempt to service this
appliance yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all servicing
to your cable company.
REPLACEMENT PARTS – When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
SAFETY CHECK – Upon completion of any
service or repairs to this appliance, ask the
service technician to perform safety checks
to determine that the appliance is in proper
operating condition.
DAMAGE REQUIRING SERVICE – Unplug this
appliance from the wall outlet and call your
cable company under the following
conditions:
÷When the power-supply cord or plug is
damaged.
÷If liquid has been spilled, or objects have
fallen into the appliance.
÷If the appliance has been exposed to rain or
water.
÷If the appliance does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions. Improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore
the appliance to its normal operation.
÷If the appliance has been dropped or the
cabinet has been damaged.
÷When the appliance exhibits a distinct
change in performance – this indicates a
need for service.
POLARIZATION – This unit's power cord has a
polarized plug (one blade is wider than the
other). This plug will fit into the power outlet
only one way. This is a safety feature. If you
are unable to insert the plug fully into the
outlet,try reversing theplug. If the plugshould
stillfail to fit, contactyour electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
POWER-CORD PROTECTION – Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them. Pay particular
attention to cords at plugs, convenience
receptacles, and the point where they exit
from the appliance.
OUTDOOR ANTENNA GROUNDING – If an
outside antenna or cable system is connected
to the video product, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA 70,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirementsfor the grounding electrode.See
Figure A.
LIGHTNING – For added protection for the unit
during a lightning storm, unplug it from the
wall outlet and disconnect the cable system
input. This will prevent damage due to
lightning and power-line surges.
OVERLOADING – Do not overload wall outlets
and extension cords as this can result in a risk
of fire or electric shock.
OBJECT AND LIQUID ENTRY – Neverpush objects
of any kind into this appliance through
openingsastheymay touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the appliance.
VENTILATION – Slots and openings in the
cabinetare provided for ventilationto ensure
reliable operation of the appliance and to
protect it from overheating. These openings
mustnot be blockedor covered. Theyshould
never be blocked by placing the appliance
on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near
or over a radiator or heat register. This
appliance should not be placed in a built-in
installationsuch as a bookcaseor rack unless
proper ventilation is provided or the
manufacturer's instructions have been
adhered to.
POWER SOURCES – The appliance should be
operated only on the voltage indicated on
the product label. If you are not sure of the
type of power supply to your home, consult
your appliance dealer or local power
company.
NEC – NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 – 20)
GROUNDING CONDUCTORS
(NEC SECTION 810 – 21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
FIG. A
NOTE TO CATV SYSTEM INSTALLER:
This reminder is to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifications that the cable grounding shall be connected
to the grounding system of the building, as close to the point of cable entry as practical.
