Pioneer S-3EX Bedienungsanleitung

S-3EX

http://www.pioneer.uk

(or http://www.pioneer.eu)

http://www.pioneer.fr

(ou http://www.pioneer.eu).

http://www.pioneer.de

http://www.pioneer.eu

http://www.pioneer.it

http://www.pioneer.eu

http://www.pioneer.nl - http://www.pioneer.be

(of http://www.pioneer.eu)

http://www.pioneer.es

http://www.pioneer.eu

http://www.pioneer.pt

http://www.pioneer.se

http://www.pioneer.eu

http://www.pioneer.dk

http://www.pioneer.eu

http://www.pioneer.no

http://www.pioneer.fi

(or http://www.pioneer.eu).

http://www.pioneer-rus.ru

http://www.pioneer.eu

Istruzioni di utilizzo

Handleiding /

Sistema de Colunas /

S-3EX_EN.book 1 ページ２００７年４月２３日　月曜日　午後５時１２分

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058_A_En

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model

properly. After you have finished reading the instructions, put them away in a safe place for future reference.

Contents

Before you start

What’s in the box

About the EX series

Technology behind the S-3EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ceramic Graphite Diaphragm. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Magnesium Alloy Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Bass Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Bass Enclosure Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Crossover Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Collaboration with Air Studios . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation and Placement

How to install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Mounting the Fall-Prevention Fastener . . . . . . . . . . . . . . . . . . . . . 6

Choosing Where To Place The Speaker Systems . . . . . . . . . . . . . 6

Connections

Connecting to an amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Single-Wire Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Bi-Wire Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Bi-Amplification Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Other Information

Attaching/Removing the Grille Cover . . . . . . . . . . . . . . . . . . . . . . 11

Cleaning the speaker cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

S-3EX_EN.book 2 ページ２００７年４月２３日　月曜日　午後５時１２分

English

Before you start

• The nominal impedance of this speaker system is 6 Ω.

Connect the speaker system to an amplifier with a load

impedance ranging from 4 Ωto 16 Ω(a model with “4 Ωto 16

Ω” displayed on the speaker output terminals).

In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

• Do not supply power to the speaker system in excess of the

maximum permissible input.

• When using a graphic equalizer to emphasize loud sounds in

the high-frequency range, do not use excessive amplifier

volume.

• Do not try to force a low-powered amplifier to produce loud

volumes of sound (the amplifier’s harmonic distortion will be

increased, and you may damage the speaker).

Caution: installation

• When placing this unit, ensure that it is firmly secured and

avoid areas where it may be likely to fall and cause injury in the

event of a natural disaster (such as an earthquake).

• Do not attach these speakers to the wall or ceiling. They may

fall off and cause injury.

• Do not install your speakers overhead on the ceiling or wall. If

improperly attached, the speaker grille can fall and cause

damage or personal injury.

• Switch off and unplug your AV equipment and consult the

instructions when connecting up components. Make sure you

use the correct connecting cables.

Caution: in use

• Do not place the speaker on an unstable surface. It could

present a hazard if it falls, as well as damaging the equipment.

• Do not use the speaker to output distorted sound for long

periods of times. This can result in a fire hazard.

• Do not sit or stand on the speaker, or let children play on the

speaker.

• Do not put large or heavy objects on top of the speaker.

• Do not place magnetic objects such as screwdrivers or iron

parts near the tweeter or midrange. Since the speakers use

strong magnets, the objects may be attracted, causing injury

or damaging the diaphragm.

What’s in the box

Spike bases x3

Mounting pads 3 types, 2 each

Metal catch x1

Screw (for metal catch) x1

Grille x1

Operating instructions

CAUTION

hese speaker terminals carry HAZARDOUS LIVE

voltage. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

D3-4-2-2-3_A_En

S-3EX_EN.book 3 ページ２００７年４月２３日　月曜日　午後５時１２分

About the EX series

The EX series, incorporating the abundant technological know-how behind Pioneer's flagship TAD speaker series, was developed

with the goal of creating the ultimate speaker possible in its price range.

The design and production of the EX series result from an international effort that represents the finest in Pioneer's speaker technology.

Technology behind the S-3EX

CST

The core driver of the system is the Coherent Source Transducer

(CST), which draws on the technology used in TAD. The tweeter

diaphragm is mounted concentrically within the apex of the

midrange cone and provides a point source of sound from 400 Hz

to 100 kHz. The CST ensures a perfect spectral balance between

the direct and reflected sounds that arrive at the listener's ears,

providing a more consistent sound throughout the listening room

and improved imaging capability.

Ceramic Graphite Diaphragm

The CST's tweeter features a ceramic graphite diaphragm that

provides top-level strength and dampening characteristics that

are practically unrivaled by any other available materials currently

used in high-end audio speaker systems. Ceramic graphite's

lightness and exceptional strength combine to create speakers

whose diaphragm resonance can be pushed far beyond their

audible range.

Magnesium Alloy Diaphragm

The CST's midrange features a magnesium alloy diaphragm

whose characteristic lightness and high inner loss provide

excellent transience and minimal coloration of midrange sounds.

18 000

Velocity (m/s)

Inner Loss

16 000

14 000

12 000

10 000

8 000

6 000

4 000

2 000

0.005 0.015 0.025

S-3EX_EN.book 4 ページ２００７年４月２３日　月曜日　午後５時１２分

English

Bass Drivers

The bass driver pictured below serves as the foundation of the S-

3EX speaker system. The driver's strength is the result of the

Aramid/Carbon composite material, originally created during the

development of the S-1EX, that is used in its diaphragm. Pioneer's

exclusive LDMC magnetic circuit technology has been

incorporated in order to preserve linearity from low to high output

levels and minimize distortion.

Bass Enclosure Construction

The unique form of the S-3EX is based upon logical necessity. In

order to synchronize the arrival time of sound from the CST and

the two bass drivers, each driver is mounted upon a baffle that

serves to create a highly delicate curve known as the "precision

curve" (see illustration below). Made of up to 100 mm thick MDF

(Medium Density Fiberboard), this baffle is, moreover, strong

enough to contain the force of the drivers. Additionally, the bass

port has been carved out of an extremely thick block of MDF,

resulting in the reduction of wind noise for clear, deep bass.

Crossover Networks

The crossover networks use only the finest components. Air cored

coils, noninductive resistors, and film capacitors in the signal path

are all carefully chosen and optimized for the CST driver to provide

the greatest transparency to the signal. The bass drivers use

silicon steel plate core inductors that minimize distortion and loss

during energy transfer. All components are connected directly to

their respective wiring materials, instead of a printed circuit-

board, allowing for minimal loss and maximum performance.

Collaboration with Air Studios

Since its establishment by George Martin in 1969, London,

England's Air Studios has earned unequivocal respect from

scores of artists who recognize it as the world's premier recording

studio. The Air Studios seal that was awarded to the S-3EX

indicates that these speakers are capable of producing the high-

quality sound demanded by the world's top-class sound creators.

1 m

3 m

precision curve

S-3EX_EN.book 5 ページ２００７年４月２３日　月曜日　午後５時１２分

Installation and Placement

How to install

This speaker system is supported by three points (the front two

legs, and the back spike located between the back two legs).

1 Choose the location for speaker placement then put the

spike bases on the floor.

2 Place the speaker on top of the spike bases.

3 If either the left or right back legs touches the ground

before the back spike, resulting in the speaker not resting

flat on its placed surface, adjust the back spike so it extends

to the ground before either of the back legs.

4 Place the included mounting pads underneath the back

legs to keep the speaker stable.

Choose the most appropriate thickness of mounting pad from the

several types included.

Mounting the Fall-Prevention Fastener

• Using the included screw, tightly secure the metal catch to the

backside of the speaker.

• Pass a commercially-available reinforced string through the

metal catch to securely support the speaker to the wall. Be

sure that the wall to which you fasten the speaker is strong

enough to support the weight of the speaker. After fastening

the speaker, make sure that it does not fall over.

• The speaker can incur damage in the event of a fall.

• Do not attach the metal catch directly to the wall. It should

only be used in conjunction with reinforced string to prevent

the speaker from falling.

• Pass two reinforced strings through the metal catch, and

fasten the speaker to the wall as shown above.

Do not place the speaker where it will be in direct

sunlight, and avoid positioning it near heaters and air

conditioners. Doing so may cause warping and

discoloration of the speaker cabinet and damage to

the speaker.

Pioneer assumes no liability whatsoever for

damages resulting from assembly, improper

mounting, insufficient reinforcement, misuse of the

product, acts of nature, etc.

• Do not place the speaker on an unstable surface. It could present a hazard if it falls, as well as damaging the equipment.

• As a precautionary measure, be sure to not place the unit anywhere where it might fall on a sleeping individual in the event of an

earthquake.

• As this unit weighs some 48 kg, it is very dangerous to try and set the spike nut while tilting the speaker. Be sure to place the unit on a

soft area (such as a blanket) so that it does not damage the floor, and carry out the installation with at least two people.

Legs

Cabinet base

Nut (for spike)

Back spike

Front

Back

Mounting pad

Backside of speaker

Sufficiently thick cord

Metal catch

S-3EX_EN.book 6 ページ２００７年４月２３日　月曜日　午後５時１２分

English

Choosing Where To Place The Speaker Systems

Placement within the listening room will have a great impact upon the total performance of the S-3EX speaker system in terms of bass

performance, tonal accuracy, and imaging. All rooms are different and so this section is intended as a guide only. Experimentation in your

room will yield optimum results.

Use the graphic below as a guide to determine optimal speaker placement.

• In areas of high humidity, use a dehumidifier, and in areas of excessive dryness, use a humidifier to adjust the room’s humidity level.

Avoid exposure to direct sunlight, and do not install in areas near by heating appliances.

Listening position

30 cm to 60 cm 30 cm to 60 cm

30 cm to 60 cm

Speaker

(right)

Speaker

(left)

Distance "A" should be equal to or greater than distance "B."

Each speaker should face the listening position.

S-3EX_EN.book 7 ページ２００７年４月２３日　月曜日　午後５時１２分

Connections

Connecting to an amplifier

This speaker does not include speaker cables used for connecting

to an amplifier. Take the following factors into consideration when

choosing speaker cables so that you can get the most from your

speaker system:

• Use heavy-gauge speaker cable if possible, and keep the

cables to the minimum necessary length.

• If the length of cable required for left and right speakers

differs, use cables of the same length, matched to the longer

distance.

• Cables have differing characteristics. Keep this in mind when

using any cable.

• Select cables with as little resistance as possible, and make

sure the cables to the speaker terminals and amp are firm and

secure.

Connecting the cables

1 Switch off the power to your amplifier.

2 Connect the speaker cables to the input terminals (lower)

on the back of the speaker. For input terminal polarity, red is

positive (+) and black is negative (–).

3 Connect the other ends of the cables to the amp's

speaker output terminals (for more details, refer to your amp

owner's manual).

• Grasp the cap knobs on the lower input terminals and rotate

them to the left (counter-clockwise), insert the speaker cable

wires into the holes in the terminal posts, then tighten the

knobs to secure the short bar as well as the wires.

• You can also connect the speaker’s terminals with a banana

plug. When using a banana plug, be sure to remove the cap at

the tip of the input terminal.

• After connecting the plugs, pull lightly on the cables to make

sure that the ends of the cables are securely connected to the

terminals. Poor connections can create noise and

interruptions in the sound.

• If the cables' wires happen to be pushed out of the terminals,

allowing the wires to come into contact with each other, it

places an excessive additional load on the amp. This may

cause the amp to stop functioning, andmay even damage the

amp.

• When using a set of speakers connected to an amplifier, you

won't be able to obtain the normal stereo effect if the polarity

of one of the speakers (left or right) is reversed.

Short bar connectors

Red terminal

(+)

Black terminal

(–)

S-3EX_EN.book 8 ページ２００７年４月２３日　月曜日　午後５時１２分

English

Single-Wire Connections

For single-wire connections, connect the mid-to-high- and low-

frequency sections of the crossover network with the shorting link

that was included with this unit, then connect the (+) wire from

your amplifier to either red binding post and the (–) wire from your

amplifier to either black binding post, as shown in below.

Bi-Wire Connections

In a bi-wiring connection, you independently plug in the speaker

systems running from the amp to their respective high- and low-

frequency plugs. This results in the CST driver and bass drivers

being independently connected directly to the amplifier, offering

you the freedom to optimize the cable type for each of the drivers.

Connect one set of wires to the bottom set of binding posts (bass

driver-specific network). Then connect a second set of wires to the

top binding posts (CST-specific network). Next, connect both sets

of wires to the appropriate terminals on your amplifier. Take care

to connect both (+) wires to the (+) amplifier terminals and both

(–) wires to the (–) amplifier terminals, as shown below.

SPEAKERS OUTPU

Shorting link

connection

Speaker (rear): Input panel

lifier (rear

)

(Only one channel shown)

one channel sho n)

Speaker

PEAKER

OUTPU

Speaker (rear): Input panel

(Onl

one channel shown

)

Speaker

lifier (rear

)

S-3EX_EN.book 9 ページ２００７年４月２３日　月曜日　午後５時１２分

Bi-Amplification Connections

Bi-Amplification allows the best performance when using dedicated amplifiers for low- and mid-to-high-frequency sections. There are two

possible configurations, commonly referred to as horizontal and vertical bi-amping.

Caution

Remove the shorting links before connecting speaker cables in bi-amplifications connections. Failure to do so may result in damage to your

amplifiers.

Vertical Bi-Amping

With this configuration, identical stereo amplifiers are used for

each speaker system. One channel of each amplifier drives the

low frequency section and the other channel drives the high

frequency section, as shown below.

Connect one set of wires and amplifier channel to the bottom set

of binding posts (bass driver-specific network).

Then connect a second set of wires and the other amplifier

channel to the top binding posts (CST-specific network).

Take care to connect both (+) wires to the (+) amplifier terminals

and both (–) wires to the (–) amplifier terminals.

Horizontal Bi-Amping

With this configuration, you may use different stereo amplifiers for

the low- and mid-to-high-frequency sections of the speaker system

(e.g., tube amplifiers for high frequency and solid state for low

frequency). Each channel of one amplifier drives the low-

frequency section of each speaker system and each channel of

the other amplifier drives the mid-to-high-frequency section, as

shown below.

This method requires that both amplifiers have the same gain;

otherwise an imbalance will be heard between the low- and mid-

to-high-frequency reproduction from the speaker system. If in

doubt, please consult your local dealer.

AKER

OUTPU

INP

OUTPUT

INP

h.1

Ch.

Speaker (rear) Input panel

(Onl

one channel shown

)

Speaker

Power am

(

rear

)

(Commercially-

available Y-adaptor)

Pre-am

(rear

)

SPEAKERS OUTPUT

INP

SPEAKERS OUTPU

INP

OUTPUT

Power am

(rear

)

(Low fre

uenc

Power am

(rear

)

(Hi

h fre

uenc

(Only one channel shown)

hlh)

(O l

(Only one channel shown)

hlh)

(Only one channel shown)

Ol h l h )

(Commercially-available

Y-adaptor)

Speaker (rear) Input panel

Speaker

Pre-am

(rear

)

S-3EX_EN.book 10 ページ２００７年４月２３日　月曜日　午後５時１２分

Andere Handbücher für S-3EX

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Lautsprechersystem Handbücher

Pioneer

Pioneer HTP102-SW Bedienungsanleitung

Pioneer

Pioneer PDP-S59 Bedienungsanleitung

Pioneer

Pioneer S-STP500 Bedienungsanleitung

Pioneer

Pioneer S-L8-LRW XE Bedienungsanleitung

Pioneer

Pioneer S-VSL3 Bedienungsanleitung

Pioneer

Pioneer S-HF21-LR Bedienungsanleitung

Pioneer

Pioneer S-FCRW2700 XTW/UC Bedienungsanleitung

Pioneer

Pioneer S-FCRW3100-k Bedienungsanleitung

Pioneer

Pioneer PDP-S11 Bedienungsanleitung

Pioneer

Pioneer S-RS3TB Bedienungsanleitung

Pioneer

Pioneer S-FCR4700 Bedienungsanleitung

Pioneer

Pioneer S-L9-LRW Bedienungsanleitung

Pioneer

Pioneer S-V7000 Bedienungsanleitung

Pioneer

Pioneer SBX-301 Bedienungsanleitung

Pioneer

Pioneer S-FCRW2700 XTW/UC Bedienungsanleitung

Pioneer

Pioneer XW-HTD630A Bedienungsanleitung

Pioneer

Pioneer ]S-2EX Bedienungsanleitung

Pioneer

Pioneer PDP-S40U XTW Bedienungsanleitung

Pioneer

Pioneer S-W80S-J Bedienungsanleitung

Pioneer

Pioneer XV-EV51 Bedienungsanleitung

Pioneer

Pioneer S-81-K Bedienungsanleitung

Pioneer

Pioneer PDP-S01-LR Bedienungsanleitung

Pioneer

Pioneer S-LX70-C Bedienungsanleitung

Pioneer

Pioneer CS-R500 Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung