Pioneer DMH-ZS9350BT Bedienungsanleitung

English Español Português (B)

DMH-ZS9350BT

DMH-Z6350BT

RDS AV RECEIVER

RECEPTOR AV RDS

RECEPTOR RDS AV

Quick Start Guide

Guía de inicio rápido

Guia de Início Rápido

2En

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the

product, and to protect it from overheating. To prevent fire hazard, the openings should never be

blocked or covered with items (such as papers, floor mat, cloths).

CAUTION

This product is evaluated in moderate and tropical climate condition under the Audio, video and

similar electronic apparatus - Safety requirements, IEC 60065.

WARNING

• LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE HANDBRAKE SWITCH. IMPROPER

CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN

SERIOUS INJURY OR DAMAGE.

• To avoid the risk of damage and injury and the potential violation of applicable laws, this

product is not for use with a video image that is visible to the driver.

•In some countries the viewing of video image on a display inside a vehicle even by persons other

than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat

video source while driving is strictly prohibited.” will appear on the screen. To watch

video image on this display, stop the vehicle in a safe place and apply the handbrake.

Please keep the brake pedal pushed down before releasing the handbrake.

Precaution

To ensure safe driving

▶DMH-ZS9350BT

▶DMH-Z6350BT

Getting started

What’s What

Display the top menu screen

Power off

Touch and holdTouch Swipe

3En

English

1language location [Network Mode] or [Standard

Mode]

WARNING

Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is

connected to the unit. This may cause damage to the speakers.

2[OK] [OK]

WARNING

•Do not attempt to operate the web browser while driving. Make sure to pull off the road and park

your vehicle in a safe location before attempting to use the controls on the web browser.

•When you use the browser, do not enter your important information such as credit card information,

bank account information and personal information.

•When you use the browser, do not install the software or programme that Pioneer is not involved

with. If you install such software or programme, you may suffer from damages such as mechanical

trouble or put your entered information in danger.

1screen

2[Wi-Fi Settings] [Access point setting]

1screen

2[Connection]

Activate the voice recognition mode

Display mobile device search or select screen

Volume

Starting up the unit

Wi-Fi connection

Bluetooth® connection

Using CarAVAssist anytime, anywhere, optimise and expand your in-car and daily life.

NOTE

CarAVAssist must be connected to this unit in order to synchronise the changes.

CarAVAssist is an application that allows you to configure and transfer various settings of

this unit and register URLs as favourites so that you can browse them using this unit’s

web browser.

CarAVAssist

Download Now

4En

Selecting the source/application

Display the source/application selection screen and

select a source/application

Display the source/application list and select a source/

application

1screen

2[Radio]

Tuner operation

Display the preset channel list

Store the strongest broadcast frequencies

5En

English

1screen

2audio source

Audio operation

Switch between media file types

Display the hidden function bar

Pause and start playback

1screen

2video source

Video operation

Display the playlist screen

Select a list title that you want to play

Scroll the list title or category name

6En

1screen

Bluetooth telephone operation

Display the Bluetooth connection menu

Display the preset dial screen

Switch to the phone book mode

Switch to the call history list

Enter the phone number directly

Turn private mode on and off

Adjust the talking volume

Make an outgoing call

End a call

•Do not operate this product, any

applications, or the rear view camera

option (if purchased) if doing so will

divert your attention in any way from the

safe operation of your vehicle. Always

observe safe driving rules and follow all

existing traffic regulations. If you

experience difficulty in operating this

product, pull over, park your vehicle in a

safe location and apply the handbrake

before making the necessary

adjustments.

•Do not install this product where it may

(i) obstruct the driver’s vision,

(ii) impair the performance of any of the

vehicle’s operating systems of safety

features, including airbags, hazard lamp

buttons, or

(iii) impair the driver’s ability to safely

operate the vehicle.

In some cases, it may not be possible to

install this product because of the vehicle

type or the shape of the vehicle interior.

WARNING

Pioneer does not recommend that you

install this product yourself. This product is

designed for professional installation only.

We recommend that only authorised

Pioneer service personnel, who have

special training and experience in mobile

electronics, set up and install this product.

NEVER SERVICE THIS PRODUCT YOURSELF.

Installing or servicing this product and its

connecting cables may expose you to the

risk of electric shock or other hazards, and

can cause damage to this product that is

not covered by warranty.

CAUTION

•Secure all wiring with cable clamps or

electrical tape. Do not allow any bare

wiring to remain exposed.

•Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger

compartment into the engine

compartment. If the yellow lead’s

insulation tears as a result of contact with

metal parts, short-circuiting can occur,

resulting in considerable danger.

•It is extremely dangerous to allow cables

to become wound around the steering

column or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or

hinder driving.

•Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts,

especially the steering wheel, gearstick,

handbrake, sliding seat tracks, doors, or

any of the vehicle’s controls.

Connection

Precautions

Your new product and this

manual

Important safeguards

Precautions before

connecting the system

7En

English

•Do not route wires where they will be

exposed to high temperatures. If the

insulation heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

•Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse

resistor or filter, etc.) may fail to work

properly.

•Never feed power to other electronic

products by cutting the insulation of the

power supply lead of this product and

tapping into the lead. The current

capacity of the lead will be exceeded,

causing overheating.

•Use this unit with a 12-volt battery and

negative earthing only. Failure to do so

may result in a fire or malfunction.

•To avoid shorts in the electrical system,

be sure to disconnect the (–) battery

cable before installation.

WARNING

•When speaker output is used by 4

channels , use speakers over 50 W

(Maximum input power) and between 4

Ω to 8 Ω (impedance value). Do not use 1

Ω to 3 Ω speakers for this unit.

•When rear speaker output is used by 2 Ω

of subwoofer, use speakers over 70 W

(Maximum input power).

*Please refer to connection for a

connection method.

•The black lead is earth. When installing

this unit or power amp (sold separately),

make sure to connect the earth wire first.

Ensure that the earth wire is properly

connected to metal parts of the car’s

body. The earth wire of the power amp

and the one of this unit or any other

device must be connected to the car

separately with different screws. If the

screw for the earth wire loosens or falls

out, it could result in fire generation of

smoke or malfunction.

•When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

•When disconnecting a connector, pull the

connector itself. Do not pull the lead, as

you may pull it out of the connector.

•This product cannot be installed in a

vehicle without ACC (accessory) position

on the ignition switch.

•To avoid short-circuiting, cover the

disconnected lead with insulating tape. It

is especially important to insulate all

unused speaker leads, which if left

uncovered may cause a short circuit.

Before installing this

product

To prevent damage

Earth wire POWER AMP

Other devices

(Anotherelectronic

device in the car)

Metal parts of car’s

body

*1 Not supplied for this unit

ACC position No ACC position

•For connecting a power amp or other

devices to this product, refer to the

manual for the product to be connected.

•The graphical symbol placed on

the product means direct current.

•When the ignition switch is turned on

(ACC ON), a control signal is output

through the blue/white lead. Connect to

an external power amp’s system remote

control terminal, the auto-aerial relay

control terminal, or the aerial booster

power control terminal (max. 300 mA 12

V DC). The control signal is output

through the blue/white lead, even if the

audio source is switched off.

Important

When this product is in [Power OFF] mode,

the control signal is also turned off. If

[Power OFF] mode is cancelled, the control

signal is output again and the aerial is

extended with the auto aerial function (if

the aerial is being used). Be careful so that

the extended aerial does not come into

contact with any obstacles.

▶DMH-ZS9350BT

Notice for the blue/

white lead

Rear panel (main

terminals)

8En

▶DMH-Z6350BT

GPS aerial 3.55 m

Microphone 3 m

Monitor cable connector

Connect to LCD screen.

Aerial jack

This product

Pre out supply

Power supply

Fuse (10A)

RGB cable (supplied with Navigation

system or Hideaway TV tuner)

Pioneer navigation system or Hideaway

TV tuner

Contact your dealer to inquire about

the connectable navigation unit.

Wired remote input

Connect to steering wheel control

interface of your vehicle. For more

details, consult your dealer.

WARNING

IMPROPER CONNECTION MAY RESULT IN

SERIOUS DAMAGE OR INJURY

INCLUDING ELECTRICAL SHOCK, AND

INTERFERENCE WITH THE OPERATION

OF THE VEHICLE'S ANTILOCK BRAKING

SYSTEM, AUTOMATIC TRANSMISSION

AND SPEEDOMETER INDICATION.

To power supply

Power cord

Yellow

To terminal supplied with power

regardless of ignition switch position.

Red

To electric terminal controlled by

ignition switch (12 V DC) ON/OFF

Orange/white

To lighting switch terminal.

Black (earth)

To vehicle (metal) body.

Violet/white

Of the two lead wires connected to the

back lamp, connect the one in which

the voltage changes when the gear shift

is in the REVERSE (R) position. This

connection enables the unit to sense

whether the car is moving forwards or

backwards.

Pink

Car speed signal input

Blue/white

Power cord

Connect to system control terminal of

the power amp (max. 300 mA 12 V DC).

Light green

Used to detect the ON/OFF status of the

handbrake. This lead must be

connected to the power supply side of

the handbrake switch.

If this connection is made incorrectly

or omitted, certain functions of this

product will be unusable.

Power supply side

Handbrake switch

Earth side

NOTE

The position of the speed detection circuit

and the position of the handbrake switch

vary depending on the vehicle model. For

details, consult your authorised Pioneer

dealer or an installation professional.

Perform these connections when using a

subwoofer without the optional amplifier.

To power supply

Power cord

Left

Right

Front speaker (STD) or high range

speaker (NW)

Rear speaker (STD) or middle range

speaker (NW)

White

White/black

Grey

Grey/black

Green

Green/black

Violet

Violet/black

Subwoofer (4 Ω)

When using a subwoofer of 2 Ω, be sure

to connect the subwoofer to the violet

and violet/black leads of this unit. Do

not connect anything to the green and

green/black leads.

Not used.

Subwoofer (4 Ω) × 2

NOTES

•When a subwoofer is connected to this

product instead of a rear speaker, change

the rear output setting in the initial

setting. The subwoofer output of this

product is monaural.

For details, refer to the Operation Manual.

•With a two-speaker system, do not

connect anything to the speaker leads

that are not connected to speakers.

Speaker leads

9En

English

Important

The speaker leads are not used when this connection is in use.

Subwoofer output (SUBWOOFER OUTPUT) 23 cm (STD)

Low range output (NW)

RCA cable (sold separately)

Power amp

Front output (FRONT OUTPUT) 15 cm (STD)

High range output (NW)

Rear output (REAR OUTPUT) 15 cm (STD)

Middle range output (NW)

Yellow/black (MUTE)

If you use an equipment with Mute function, wire this lead to the Audio Mute lead on

that equipment. If not, keep the Audio Mute lead free of any connections.

Pre out cord

To pre out supply

System remote control

Power amp (sold separately) Connect to Blue/white cable (max. 300 mA 12 V DC).

Rear speaker (STD)

Middle range speaker (NW)

Front speaker (STD)

High range speaker (NW)

Subwoofer (STD)

Low range speaker (NW)

NOTE

Select the appropriate speaker mode between standard mode (STD) and network mode

(NW). For details, refer to the Operation Manual.

10En

NOTES

•For details on how to connect an external

device using a separately sold cable, refer

to the manual for the cable.

•For details concerning the connection,

operations and compatibility of the

iPhone, refer to the Operation Manual.

•For details concerning the connection

and operations of the smartphone, refer

to the Operation Manual.

•The supplied USB Type-C® cable and the

USB Type-C to USB Type-A adaptor are for

connecting a USB storage device to this

unit only. Do not use the cable and the

adaptor for other products or purposes.

This product

USB Type-C port

USB Type-C cable 1.5 m

USB Type-C to USB Type-A adaptor

USB interface cable for iPhone (CD-IU52)

(sold separately)

iPhone

TIP

When a USB Type-C to Lightning®

connector cable (Apple Inc. product) (sold

separately) is used to connect this unit to

an iPhone that supports USB-PD, quick

charging is performed for the iPhone.

NOTE

When you use a USB Type-C to Lightning

connector cable (Apple Inc. product) (sold

separately), follow the instructions

provided with the cable.

This product

USB Type-C port

USB Type-C cable 1.5 m

USB Type-C to USB Type-C interface

cable (CD-CCU500) (sold separately)

Smartphone

TIPS

•Use the supplied USB Type-C to USB

Type-A adaptor with a USB Type-A to

micro USB B cable (CD-MU200) (sold

separately) if your smartphone has a

micro USB B port.

•When a USB Type-C to USB Type-C cable

(sold separately) is used to connect this

unit to a smartphone, quick charging is

performed.

iPhone® and

smartphone

iPhone

Smartphone (Android™

device)

NOTE

If you use a cable other than those

suggested in the illustration, the main unit

may not function properly.

When you use the rear view camera, the

rear view image is automatically switched

from the video by moving the gearstick to

REVERSE (R). Camera View mode also

allows you to check what is behind you

while driving.

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR

IMAGE REAR VIEW CAMERA. OTHER USE

MAY RESULT IN INJURY OR DAMAGE.

CAUTION

•The screen image may appear reversed.

•With the rear view camera you can keep

an eye on trailers, or back into a tight

parking spot. Do not use for

entertainment purposes.

•Objects in rear view may appear closer or

more distant than in reality.

•The image area of full-screen images

displayed while backing or checking the

rear of the vehicle may differ slightly.

This product

Pre out supply

Power supply

To pre out supply

To power supply

Pre out cord

Power cord

Violet/white (REVERSE-GEAR SIGNAL

INPUT)

Brown (REAR VIEW CAMERA IN) 23 cm

Yellow (SECOND CAMERA INPUT) 23

Rear view camera (ND-BC8) (sold

separately)

To video output

RCA power supply cable (supplied with

ND-BC8)

RCA cable (sold separately)

Camera

Andere Handbücher für DMH-ZS9350BT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer SPH-DA250DAB Bedienungsanleitung

Pioneer

Pioneer VSX-D606S Bedienungsanleitung

Pioneer

Pioneer SPH-EVO82DAB Bedienungsanleitung

Pioneer

Pioneer SX-450 Bedienungsanleitung

Pioneer

Pioneer SX-1250 Bedienungsanleitung

Pioneer

Pioneer VSX-918V-S Bedienungsanleitung

Pioneer

Pioneer SX-40 Bedienungsanleitung

Pioneer

Pioneer VSX-5400 Bedienungsanleitung

Pioneer

Pioneer SX-319V-K Bedienungsanleitung

Pioneer

Pioneer sx-d5000 Bedienungsanleitung

Pioneer

Pioneer VSA-LX805 Bedienungsanleitung

Pioneer

Pioneer VSX-5000 Bedienungsanleitung

Pioneer

Pioneer DVH-750AV/XEUW5 Bedienungsanleitung

Pioneer

Pioneer SX-535 Bedienungsanleitung

Pioneer

Pioneer XC-L5 Bedienungsanleitung

Pioneer

Pioneer SX-303 Bedienungsanleitung

Pioneer

Pioneer SX-750 Bedienungsanleitung

Pioneer

Pioneer VSX-1020-K Bedienungsanleitung

Pioneer

Pioneer SX-626 Bedienungsanleitung

Pioneer

Pioneer MVH-G215BT Bedienungsanleitung

Pioneer

Pioneer SX-209RDS Bedienungsanleitung

Pioneer

Pioneer SPH-DA250DAB Bedienungsanleitung

Pioneer

Pioneer DMH-WT3800NEX Bedienungsanleitung

Pioneer

Pioneer VSX-405 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung