Pioneer Elite VSX-LX805 Bedienungsanleitung

Instruction Manual

AV RECEIVER

VSX-LX805

Contents

Table of contents

Reducing the Power Consumption in Standby

State

When the following functions are enabled, the power consumption in

standby state increases. To reduce the power consumption in standby state,

check each setting and set the functions to "O󰀨".

– HDMI CEC ( →p146)

– HDMI Standby Through ( →p146)

– USB Power Out at Standby ( →p148)

– Network Standby ( →p149)

– Bluetooth Wakeup ( →p149)

Detailed contents (Next page)

Firmware Update

Troubleshooting

Supplementary Information

Zone 2Zone 2

Main Room

one

Zone 2

Main Room

Roo

Speaker LayoutSpeaker Layout

PRE OU T

Speaker ConnectionsSpeaker Connections

Before starting the procedure 7

Firmware Update 8

Update Information of the rmware 8

Checking the Firmware Version of the Unit 8

Firmware Update Procedure 8

Part Names 11

Front Panel (North American and Taiwanese models) 11

Front Panel (European, Australian and Asian models) 13

Display 15

Rear Panel 16

Remote Controller 18

Inputting Characters 20

Speaker Layout

The listening room and the speaker layout 22

5.1 Channel System 23

7.1 Channel System 24

5.1.2 Channel System 25

7.1.2 Channel System 26

5.1.4 Channel System 27

7.1.4 Channel System 30

Speaker Installation

Setting Up the Speakers 33

Speaker Connections

Speakers you can use with this unit and cable

connections 40

Connect the Subwoofer 41

Connecting a Power Amplier 61

Connections

Notes regarding connections with HDMI cables 63

Connections 63

Connecting the TV 64

To ARC/eARC TV 64

To Non-ARC TV 64

Connecting the SUB Monitor 66

SUB Monitor 66

Connecting Playback Devices 67

Connections to BD/DVD and GAME with HDMI jacks 67

Connecting a BD/DVD without HDMI Jack Mounted 68

Connecting an Audio Component 69

Connecting a Video Camera, etc. 70

Connecting a TV or Integrated Amplier in a separate

room (Multi-zone) 71

Connecting a TV (ZONE 2) 71

Connecting an Integrated Amplier (ZONE 2) 72

Connecting an Integrated Amplier (ZONE 3) 73

Connecting Antennas (North American and

Taiwanese models) 74

Network Connection 75

Connecting External Control Devices 76

IR IN/OUT port 76

12V TRIGGER OUT jack 77

Connecting the Power Cord 78

Playback

Basic Operations 80

Turning the power on 80

Selecting a source to play 80

Adjusting the volume 81

Using the linking function (HDMI CEC) 81

Listening Mode 83

Selecting a Listening mode 83

BLUETOOTH®Playback 84

Playing audio from BLUETOOTH wireless technology

enabled devices with this unit 84

Transmitting audio from this unit to BLUETOOTH

wireless technology enabled devices 86

Listening To the Radio (North American and

Taiwanese models) 88

Listening To the AM/FM Radio 88

Presetting a Radio Station 90

AV Adjust 91

Spotify 95

AirPlay® 96

Basic Operations 96

Playing Back on multiple devices (AirPlay2) 97

DTS Play-Fi® 98

Playing Back 98

Amazon Alexa 99

Registering this unit with an Amazon account 99

Operating this unit 100

Amazon Music 101

Registering This Unit with Amazon Music 101

Playing Amazon Music using the Pioneer Remote

App 102

Playing Amazon Music using the remote controller 102

TIDAL 103

Registering this unit with TIDAL 103

Playing TIDAL 103

Connecting the Sonos System for Playback 104

Necessary Equipment 104

How to Connect This Unit and Sonos Connect 104

Setting Up 104

Playing Sonos on This Unit 105

Internet Radio 106

Playing Back 106

Multi-zone 108

Playing Back (ZONE 2) 109

Playing Back (ZONE 3) 111

Using PERSONAL PRESET 113

AV Direct Mode 115

Using "AV Direct" 115

Using "AV Direct Net O󰀨" 115

Playing music les saved on a USB storage device 116

USB Storage Device Requirements 117

Music Server 118

Music Server notes 118

Windows Media® Player 12 settings 118

Playing Back 119

Play Queue 121

Adding Play Queue Information 121

Sort and Delete 121

Playing Back 122

Connecting a transmitter for playback 123

Connections 123

Setting Up 123

Playing Back 123

Setup

System Setup 126

Menu list 126

Input/Output Assign 128

Speaker 134

Audio Adjust 141

Source 144

Hardware 146

Multi Zone 152

Miscellaneous 155

MCACC Pro 157

Menu operations 157

Full Auto MCACC 158

Manual MCACC 160

MCACC Data Check 165

Data Management 166

Network/Bluetooth 167

Menu operations 167

Network 168

Bluetooth 171

Web Setup 174

Menu operations 174

Initial Setup with Auto Start-up Wizard 175

Operations 175

1. Speaker Setup 176

2. Multi Zone Sound Check 177

3. ARC Setup 177

4. Room EQ 177

Pioneer Remote App 181

Main features 181

Initial Setup 181

Dirac Live 182

Measuring with Dirac Live 182

Using Dirac Live 183

Manual Adjust 184

Troubleshooting

Before starting the procedure 186

When the unit is operating erratically 187

Troubleshooting 188

Appendix

Speaker Layouts and Selectable Listening Modes 200

Input Formats and Selectable Listening Modes 203

Listening Mode E󰀨ects 207

Speaker combinations 212

General Specications 214

Before starting the procedure

What's in the box

A Main unit (1)

B Remote controller (RC-990R) (1), Batteries (AAA/R03) (2)

C Speaker setup microphone (1)

• Used during Initial Setup.

D Indoor FM antenna (North American and Taiwanese models) (1)

E AM loop antenna (North American and Taiwanese models) (1)

F Power cord (1)

• Initial Setup Guide (1)

This document is an online instruction manual. This is not supplied with the product.

Note

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Network services and content that can be used may no longer be available

if new functions are added by updating rmware or the service providers

terminate their services. Also, available services may di󰀨er depending on

your area.

• Details on the rmware update will be posted on our website and through

other means at a later date.

• The illustrations in this manual use those of North American models unless

otherwise mentioned.

• Specications and appearance are subject to change without prior notice.

Firmware Update

Disclaimer: The program and accompanying online documentation are

furnished to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective prots, loss of data, or for any other reason whatsoever.

Update Information of the rmware

For the latest rmware contents and the rmware version, visit website.

• When this unit is connected to the network, notications of rmware

updates may be displayed. To update the rmware, select "Update Now"

with the cursor buttons of the remote controller and press ENTER. The unit

automatically enters standby mode after "Completed!" is displayed, and the

update is completed.

Checking the Firmware Version of the Unit

To conrm the rmware version of your product, press the button on the

remote controller to display the Home screen, and refer to "System Setup" -

"Miscellaneous" - "Firmware Update" - "Version" ( →p155).

Firmware Update Procedure

Updating can take about 20 minutes. Existing settings are maintained.

Updating the Firmware via Network

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Turn o󰀨 control devices (PC etc.) connected to the network.

• Stop an Internet radio, USB storage device, or server content being played.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Turn on the power of the unit and wait for about 20 seconds.

2. Press the button on the remote controller, select "System Setup" -

"Miscellaneous" - "Firmware Update" - "Update via NET" with the cursors in

order, then press ENTER.

• If "Firmware Update" is not available for selection, wait until the system has

started.

• "Update via NET" will not be available for selection if the rmware of the

unit is the latest.

3. Press ENTER with "Update" selected, and start update.

"Completed!" is displayed when updating is completed.

• Check the progress on the display of the unit.

4. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

Ethernet cable not found. Connect the Ethernet cable properly.

• -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,

-21:

Internet connection error. Check the following:

– Whether the router is turned on

– Whether this unit and the router are connected via the network

Unplug and plug the power cords of this unit and the router. This may solve

the problem. If you are still unable to connect to the Internet, the DNS server

or proxy server may be temporarily down. Check the server operation status

with your Internet service provider.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Updating via USB

• Save only the updating data on the USB storage device. Delete any other

data.

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Prepare a 1 GB or larger USB storage device. The format of USB storage

devices supports FAT16 or FAT32 le system format.

– Media inserted into a USB card reader may not be used for this function.

– USB storage devices equipped with the security function are not

supported.

– USB hubs and USB devices equipped with the hub function are not

supported. Do not connect these devices to the unit.

• Turn o󰀨 control devices (PC etc.) connected to the network.

• Stop any playing Internet radio, USB storage device, or server content.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* Depending on the USB storage device or its content, long time may be required

for loading, the content may not be loaded correctly, or power may not be supplied

correctly.

* Our company will not be liable whatsoever for any loss or damage of data, or

storage failure arising from the use of the USB storage device. Please note this in

advance.

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Connect the USB storage device to your PC.

2. Download the rmware le from the our company's website to your PC and

unzip.

Firmware les are named as below.

PIOAVR_R.zip

Unzip the le on your PC. The number of unzipped les and folders varies

depending on the model.

3. Copy all unzipped les and folders to the root folder of the USB storage

device.

• Make sure to copy the unzipped les.

4. Connect the USB storage device to the USB port of this unit.

• If an AC adapter is supplied with the USB storage device, connect the AC

adapter, and use it with a household outlet.

• If the USB storage device has been partitioned, each section will be

treated as an independent device.

5. Turn on the power of the unit and wait for about 20 seconds.

6. Press the button on the remote controller, select "System Setup" -

"Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in

order, then press ENTER.

• If "Firmware Update" is not available for selection, wait until the system has

started.

• "Update via USB" will not be available for selection if the rmware of the

unit is the latest.

7. Press ENTER with "Update" selected, and start update.

"Completed!" is displayed when updating is completed.

• Check the progress on the display of the unit.

• During the update, do not turn the power o󰀨, or disconnect or reconnect

the USB storage device.

8. Disconnect the USB storage device from the unit.

9. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

The USB storage device cannot be recognized. Check if the USB storage

device or USB cable is securely inserted to the USB port of the unit.

Connect the USB storage device to an external power source if it has its own

power supply.

• -05, -13, -20, -21:

The rmware le is not present in the root folder of the USB storage device,

or the rmware le is for another model. Retry from the download of the

rmware le.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Andere Handbücher für Elite VSX-LX805

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer SPH-EVO64DAB Bedienungsanleitung

Pioneer

Pioneer SX-434 Bedienungsanleitung

Pioneer

Pioneer VSX-D1S Bedienungsanleitung

Pioneer

Pioneer CT-225 Bedienungsanleitung

Pioneer

Pioneer VSX-9700S Bedienungsanleitung

Pioneer

Pioneer SX-5580 Bedienungsanleitung

Pioneer

Pioneer DMH-1770NEX Bedienungsanleitung

Pioneer

Pioneer AVH-P5900DVD/XN/UC Bedienungsanleitung

Pioneer

Pioneer SX-600L Bedienungsanleitung

Pioneer

Pioneer VSX-605S Bedienungsanleitung

Pioneer

Pioneer AVH-3500NEX Bedienungsanleitung

Pioneer

Pioneer VSX-425 Bedienungsanleitung

Pioneer

Pioneer SX-202 Bedienungsanleitung

Pioneer

Pioneer SX-1280 Bedienungsanleitung

Pioneer

Pioneer SX-20-K Bedienungsanleitung

Pioneer

Pioneer AVH-4400BT Bedienungsanleitung

Pioneer

Pioneer VSX-07TX Bedienungsanleitung

Pioneer

Pioneer DMH-Z5350TV Bedienungsanleitung

Pioneer

Pioneer VSX-C100 Bedienungsanleitung

Pioneer

Pioneer VSX-322-K Bedienungsanleitung

Pioneer

Pioneer AVH-291BT Bedienungsanleitung

Pioneer

Pioneer VSX-405 Bedienungsanleitung

Pioneer

Pioneer VSX-605S Bedienungsanleitung

Pioneer

Pioneer AVH-3300NEX Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung