Pioneer SC-LX502-S Installationsanleitung

Before Start ............................................................................2

What's in the box......................................................................2

Part Names .............................................................................3

Part Names ..............................................................................3

Install ......................................................................................7

Installation procedure ...............................................................7

Step1: Speaker Layout .............................................................8

Step2: Connect the Speakers.................................................15

Step3: Connect the TV & AV Components.............................17

Initial Setup ..........................................................................25

Initial Setup with Auto Start-up Wizard...................................25

Playback ...............................................................................27

AV Component Playback........................................................27

BLUETOOTH® Playback........................................................27

Network Functions..................................................................28

USB Storage Device...............................................................29

Listening to the AM/FM Radio ................................................30

Multi-zone...............................................................................32

Listening Mode.......................................................................34

The Basic Manual includes information needed when starting up and

also instructions for frequently used operations. The Advanced Manual

has more detailed information and advanced settings.

Basic

Manual

AV RECEIVER

SC-LX502

> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Before Start

What's in the box

1. Main unit (1)

2. Remote controller (RC-914R) (1), Batteries (AAA/R03)

(2)

3. Speaker setup microphone (1)

0Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

6. Power cord (1)

0Quick Start Guide (1)

0Basic Manual (This manual)

0Connect speakers with 4 Ω to 16 Ω impedance.

0The power cord must be connected only after all other

cable connections are completed.

0We will not accept responsibility for damage arising from

the connection of equipment manufactured by other

companies.

0Functionality may be introduced by firmware updates

and service providers may cease services, meaning that

some network services and content may become

unavailable in the future. Furthermore, available services

may vary depending on your area of residence.

0Details on the firmware update will be posted on our

website, etc.

0Specifications and appearance are subject to change

without prior notice.

> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Part Names

Front Panel

1. INPUT SELECTOR dial: Switch the input to be played.

2. MCACC indicator: This lights when you have enabled the speaker calibration made with

MCACC. (P26)

3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the

display off.

4. INFO button: Switches the information on the display. (P34)

5. ZONE 2 ON/OFF button: Switches the multi-zone function on/off. (P32)

6. ZONE CONTROL button: Controls the multi-zone function. (P32)

7. MULTI-ZONE MUSIC button: Enables the MULTI-ZONE MUSIC function to play the same

source in all the multi-zone connected rooms. (P33)

8. Display (P4)

9. Listening mode button: Press "AUTO/DIRECT", "SURROUND" or "STEREO" to switch

the listening mode. (P34) (*)

10.

NETWORK indicator: This lights when "NET" is selected with the input selector and the

unit is connected to the network. If the unit is in standby mode, this lights when functions

such as HDMI CEC and network standby are enabled. It does not light when ZONE 2 is

on, however.

11.

Remote control sensor: Receives signals from the remote controller.

0The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on

the perpendicular axis and 30° to either side.

12.

WIRELESS indicator: Lights when the unit is connected to the wireless network and when

connected to a BLUETOOTH enabled device.

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

  

          



(*)You can find details in the Advanced Manual.

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

13.

MASTER VOLUME

14.

ÍSTANDBY/ON button

15.

ADJUST button: Settings such as "Tone" and "Level"

can be made quickly during play on the TV screen.

16.

HOME button: Displays the Home. (*)

17.

Cursor buttons ( /  /  / ) and ENTER button:

Select the item with the cursors and press ENTER to

confirm. Use them to tune to stations when using

TUNER. (P30)

18.

RETURN button: Returns the display to the previous

state.

19.

TUNING MODE button: Switches tuning to an AM/FM

radio station between automatic tuning and manual

tuning.

20.

+FAVORITE button: Used to register AM/FM radio

stations.

21.

PHONES jack: Headphones with a standard plug

(Ø1/4z/6.3 mm) are connected.

22.

MCACC SETUP MIC jack: The supplied speaker setup

microphone is connected.

23.

PHASE CONTROL button: This turns on or off the

Phase Control that corrects phase disturbance in the

low range to reproduce bass that is faithful to the

original sound.

24.

USB port: A USB storage device is connected so that

music files stored in it can be played. You can also

supply power (maximum 5 V/1 A) to USB devices with

a USB cable.

25.

AUX INPUT HDMI jack: Connect to a video camera,

etc., using a HDMI cable.

26.

DIMMER button: You can switch the display off or

adjust the brightness of the display in three steps.

27.

Front flap

Display

1. This may light when performing operations with the "NET", "USB" input

selector.

2. Lights in the following conditions.

Z2: When ZONE 2 is on.

: When connected by BLUETOOTH.

: When connected by Wi-Fi.

NET: When "NET" is selected with the input selector and the unit is

connected to the network. It will flash if the connection to the network is

not correct.

USB: When "USB" is selected with the input selector and the unit is

connected by USB and the USB device is selected. Flashes if the USB

is not properly connected.

HDMI: When HDMI signals are input and the HDMI input is selected.

DIGITAL: When digital signals are input and the digital input is

selected.

3. Lights according to the type of input digital audio signals and the

listening mode.

4. Lights in the following conditions.

RDS (European, Australian and Asian models): Receiving RDS

broadcasting.

TUNED: Receiving AM/FM radio.

STEREO: Receiving FM stereo.

SLEEP: When the sleep timer is set. (*)

AUTO STBY: Auto Standby is on. (*)

5. The currently selected speaker system lights.

6. Lights when headphones are connected.

7. Flashes when muting is on.

8. Displays various information of the input signals. Characters that

cannot be displayed on this unit are replaced with asterisks (¢).





9. Lights when adjusting the volume.

10.

Speaker/Channel display: Displays the

output channel that corresponds to the

selected listening mode.

(*)You can find details in the Advanced Manual.

Rear Panel

1. COMPONENT VIDEO IN jacks: Input the AV component video signals with a component

video cable. (Compatible only with 480i or 576i resolution.)

2. ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable to a pre-

main amplifier or a power amplifier in a separate room (ZONE 2).

3. AUDIO IN jacks: Input AV component audio signal with an analog audio cable.

4. VIDEO IN jacks: Input the AV component video signals with an analog video cable.

5. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to

an AV component.

6. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected

to a monitor such as a TV or projector.

7. SIGNAL GND terminal: The ground wire of the turntable is connected.

8. NETWORK port: Connect to the network with an Ethernet cable.

9. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio

signals with a digital optical cable or digital coaxial cable.

10.

Wireless antenna: Used upright for Wi-Fi connection or when using a BLUETOOTH

enabled device. The diagram shows the movable range for the wireless antenna. Do not

try to force it beyond this range otherwise you may break it.

11.

AC IN: The supplied power cord is connected.

12.

RS-232C port: For connection to the home control system. (*)

13.

ANTENNA AM LOOP/FM UNBAL 75≠ terminal: The supplied antennas are connected.

14.

IR IN/OUT port: Allows you to connect a multiroom remote control kit. (*)

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.





 











(*)You can find details in the Advanced Manual.

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

15.

12V TRIGGER OUT A/B jack: Allows you to connect a

device with 12V trigger input jack to enable link

operation between the device and the unit. (*)

16.

SUBWOOFER PRE OUT jack: Connect a powered

subwoofer with a subwoofer cable. Up to two powered

subwoofers can be connected. The same signal is

output from each of the SUBWOOFER PRE OUT

jacks.

17.

SPEAKERS terminals: Use a speaker cable to connect

multichannel speakers for the main room and speakers

for a separate room (ZONE 2). (North American models

are compatible with banana plugs.)

Remote Controller

1. ÍSTANDBY/ON button

2. Input selector buttons: Switches the input to be played.

3. 21 buttons: Select the input to be played.

4. (AV ADJUST) button:

Settings such as "Tone" and "Level" can be made quickly

during play on the TV screen. "Other" has settings to switch the speakers given

priority for output (P15) and to switch HDMI output (P17). Note that there is no display

on the TV screen when the input selector is "CD", "TV", "PHONO", "AM", or "FM", so

follow the display on the main unit while doing the operations. (*)

5. Cursor buttons and ENTER button: Select the item with the cursors and press

ENTER to confirm your selection. When the folder or file lists are not shown on

one screen on the TV, press / to change the screen.

6. button: Displays the Home. (*)

7. Volume buttons

8. button: Temporarily mutes audio. Press again to cancel muting.

9. LISTENING MODE buttons: Allows you to select the listening mode (P34). (*)

MAIN/ZONE 2 buttons: Controls the multi-zone function (P32). (The ZONE 3

button is not used with this unit.)

10.

Play buttons: Used for play operations when playing Music Server or USB.

11.

button: Used for repeat or random play operations when playing Music

Server or USB. Each time you press the button, the mode switches from (1-

track repeat), to (folder repeat), to (random).

CLEAR button: Deletes all characters you have entered when entering text on

the TV screen.

12.

(STATUS) button: Switches the information on the display and is used to

operate RDS (P31).

13.

button: Returns the display to the previous state.

14.

MODE button: Switches tuning to an AM/FM station between automatic tuning

and manual tuning (P30), and also used to control the multi-zone feature (P32).

15.

+Fav button: Used to register AM/FM radio stations.































Tips

When the remote controller isn't working: The

remote controller may have switched to the mode

for controlling ZONE 2. While holding down

MODE, press MAIN for 3 seconds or more until

the remote indicator flashes once to switch it to

the mode to control the main room.

(*)You can find details in the Advanced Manual.

Install

Installation procedure

This unit can be used in a number of ways, depending on

the layout of the speakers you are installing, and the

connections made to external devices. Read the following

to help make the installation process smoother.

Step1: Speaker Layout

Select the speaker layout that suits the types of speakers

you have and the conditions they will be used in from the

choices presented on pages P8 to P13, then install the

speakers by referring to the illustrations and explanations

on the relevant page. Speaker layouts include systems that

use surround back speakers, systems that use height

speakers, and systems that use Bi-Amping speakers. Also

refer to the combinations available in "Speaker

combinations" on P14.

Step2: Connect the Speakers

To connect the speaker systems to this unit, refer to P15 if

you are using a speaker layout described on one of P8 to

P12, and to P16 to use a speaker layout using Bi-Amping

speakers described on P13. The connection process will be

smoother if you refer to the illustrations and explanations

and prepare the required cables before hand.

Step3: Connect the TV & AV Components

Refer to P17 to P24 to connect your external devices such

as your TV, Blu-ray Disc Player, and also supplied

accessories such as the antennas. Also, P21 to P23

introduces the Multi-zone Connection option that allows you

to play video and audio into rooms other than the main

room. The connection process will be smoother if you refer

to the illustrations and explanations, confirm the connection

types on the external devices, and prepare the required

cables before hand.

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

2 3

Step1: Speaker Layout

7.1 Channel System

Front speakers output front stereo sound and a center

speaker outputs center sound such as dialogs and vocals.

Surround speakers create back sound field. Powered

subwoofer reproduces bass sounds and creates rich sound

field.

This basic 5.1 Channel System with surround back

speakers added is called a 7.1 Channel System. The

connection of surround back speakers improves the sense

of envelopment and connectivity of sound created by the

back sound field and provides a more real sound field.

Furthermore, by installing surround back speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound, when the input format is Dolby

Atmos.

The front speakers should be positioned at ear height, while

the surround speakers should be positioned just above ear

height. Center speaker should be set up facing the listening

position. Placing the powered subwoofer between the

center speaker and a front speaker gives you a natural

sound even when playing music. The optimal positioning is

for surround back speakers to be at ear height.

0If you are including surround back speakers in the setup,

surround speakers are required.

0"Speaker combinations" (P14) introduces some detailed

examples of speaker combinations.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

7,8 Surround Back Speakers

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

＊3

¢1: 22e to 30e, ¢2: 90e to 110e, ¢3: 135e to 150e

Speaker B System

With a 7.1 channel system (P8), you can connect one more

set of front speakers to use as a Speaker B System. In this

state, the 7.1 channel system becomes the Speaker A

System and you can switch the same audio to output from

A, B, or A+B. Press on the remote control (P6) and use

"Other" - "Speakers" to switch. Note that no sound is played

from the surround back speakers when playing from A+B.

0"Speaker combinations" (P14) introduces some detailed

examples of speaker combinations.

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

＊3

Speaker B Speaker B

¢1: 22e to 30e, ¢2: 90e to 110e, ¢3: 135e to 150e

5.1.2 Channel System-1

(Front High Speakers/Rear High Speakers)

This is a basic 5.1 channel system consisting of front

speakers, a center speaker, surround speakers, and a

powered subwoofer, with the addition of front height

speakers or rear high speakers, which are both types of

height speakers. By installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos. Front high speakers

or rear high speakers should be situated at least 3y/0.9 m

higher than the front speakers. Front high speakers should

be situated directly above the front speakers and the

distance between the rear high speakers should match the

distance between the front speakers. Both should be set up

facing the listening position.

0"Speaker combinations" (P14) introduces some detailed

examples of speaker combinations.

9,10 Height Speakers

Choose one of the following:

0Front High Speakers

0Rear High Speakers

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

3´ (0.9 m)

or more

3´ (0.9 m)

or more

¢1: 22e to 30e, ¢2: 120e

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer Elite VSX-LX102 Installationsanleitung

Pioneer

Pioneer SX-V500 Bedienungsanleitung

Pioneer

Pioneer VSX-5000 Bedienungsanleitung

Pioneer

Pioneer DMH-ZS9350BT Gebrauchs- und Pflegehandbuch

Pioneer

Pioneer AVH-X8850BT Bedienungsanleitung

Pioneer

Pioneer SX-990 Einrichtungshandbuch

Pioneer

Pioneer DMH-1770NEX Bedienungsanleitung

Pioneer

Pioneer VSX9120TXHK - 770w 7.1 Channel Dolby Truehd Kurzanleitung

Pioneer

Pioneer XV-EV61 Bedienungsanleitung

Pioneer

Pioneer SX-626 Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Pioneer

Pioneer NO FOUND VSX-1020 Montageanleitung

Pioneer

Pioneer SX-424 FVZV Bedienungsanleitung

Pioneer

Pioneer DMH-A241BT Bedienungsanleitung

Pioneer

Pioneer AVH-5300DVD Bedienungsanleitung

Pioneer

Pioneer VSX-935 Bedienungsanleitung

Pioneer

Pioneer SX-828 Bedienungsanleitung

Pioneer

Pioneer AVH-P5950DVD/XN/RC Bedienungsanleitung

Pioneer

Pioneer VSX-5400 Bedienungsanleitung

Pioneer

Pioneer VSX-3300 Bedienungsanleitung

Pioneer

Pioneer SX-1250 Bedienungsanleitung

Pioneer

Pioneer SX-1080 Bedienungsanleitung

Pioneer

Pioneer SX-D7000 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7050BT Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung