Pioneer Super Tuner IIID AVH-P3100DVD Bedienungsanleitung

English Español Deutsch Français Italiano Nederlands

Installation Manual

Manual de instalación

Installationsanleitung

Manuel d’installation

Manuale d’installazione

Installatiehandleiding

DVD RDS AV RECEIVER

RADIO AV RDS CON DVD

DVD-RDS-AV-EMPFÄNGER

AUTORADIO AV RDS LECTEUR DE DVD

SINTOLETTORE DVD RDS CON AV

DVD RDS AV-ONTVANGER

AVH-P3100DVD

Contents

Connecting the units ............................ 3

Parts supplied ................................................. 5

Connecting the power cord ............................... 6

When connecting to

separately sold power amp ....................... 8

Connecting the system .................................. 9

When connecting

with a rear view camera .......................... 10

When connecting

with a multi-channel processor ............. 11

Connecting and installing

the optical cable connection box ........... 12

Connecting the optical cable ............................... 12

Installing the optical cable connection box ........ 12

When connecting the external

video component and the display .......... 13

When using a display connected to

rear video output .......................................... 13

Installation ........................................... 14

Before installing this unit ............................. 14

Installation with the holder

and side bracket ...................................... 14

Installation using the screw holes

on the side of the unit ............................. 15

English

Connecting the units

WARNING

• To avoid the risk of accident and the potential

violation of applicable laws, the front DVD or

TV (sold separately) feature should never be

used while the vehicle is being driven. Also, rear

displays should not be in a location where it is a

visible distraction to the driver.

• In some countries or states the viewing of images

on a display inside a vehicle even by persons

other than the driver may be illegal. Where such

regulations apply, they must be obeyed and this

unit’s DVD features should not be used.

CAUTION

• PIONEER does not recommend that you

install or service your display yourself.

Installing or servicing the product may

expose you to risk of electric shock or other

hazards. Refer all installation and servicing

of your display to authorized Pioneer service

personnel.

• Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wiring

to remain exposed.

• Do not drill a hole into the engine

compartment to connect the yellow lead

of the unit to the vehicle battery. Engine

vibration may eventually cause the insulation

to fail at the point where the wire passes from

the passenger compartment into the engine

compartment. Take extra care in securing the

wire at this point.

• It is extremely dangerous to allow the display

lead to become wound around the steering

column or gearshift. Be sure to install the

display in such a way that it will not obstruct

driving.

• Make sure that wires will not interfere with

moving parts of the vehicle, such as the

gearshift, parking brake or seat sliding

mechanism.

• Do not shorten any leads. If you do, the

protection circuit may fail to work properly.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR

IS DESIGNED TO DETECT PARKED STATUS

AND MUST BE CONNECTED TO THE POWER

SUPPLY SIDE OF THE PARKING BRAKE SWITCH.

IMPROPER CONNECTION OR USE OF THIS

LEAD MAY VIOLATE APPLICABLE LAW AND MAY

RESULT IN SERIOUS INJURY OR DAMAGE.

Connecting the units

Note

• This unit cannot be installed in a vehicle without

ACC (accessory) position on the ignition switch.

ACC position No ACC position

• Use this unit in other than the following

conditions could result in fire or malfunction.

—Vehicles with a 12-volt battery and negative

grounding.

—Speakers with 50 W (output value) and 4 ohm

to 8 ohm (impedance value).

• To prevent short-circuit, overheating or

malfunction, be sure to follow the directions

below.

—Disconnect the negative terminal of the

battery before installation.

—Secure the wiring with cable clamps or

adhesive tape. To protect the wiring, wrap

adhesive tape around them where they lie

against metal parts.

—Place all cables away from moving parts, such

as gear shift and seat rails.

—Place all cables away from hot places, such as

near the heater outlet.

—Do not pass the yellow cable through a hole

into the engine compartment to connect to a

battery.

—Cover any disconnected cable connectors with

insulating tape.

—Do not shorten any cables.

—Never cut the insulation of the power cable of

this unit in order to share the power to other

equipment. Current capacity of the cable is

limited.

—Use a fuse of the rating prescribed.

—Never wire the speaker negative cable directly

to ground.

—Never band together multiple speaker’s

negative cables.

• Control signal is output through blue/white cable

when this unit is powered on. Connect it to an

external power amp’s system remote control or

the vehicle’s auto-antenna relay control terminal

(max. 300 mA, 12 V DC). If the vehicle is equipped

with a glass antenna, connect it to the antenna

booster power supply terminal.

• Never connect blue/white cable to external power

amp’s power terminal. Also, never connect

it to the power terminal of the auto antenna.

Otherwise, battery drain or malfunction may

result.

• IP-BUS connectors are color-coded. Be sure to

connect connectors of the same color.

• Black cable is ground. This cable and other

product’s ground cable (especially, high-current

products such as power amp) must be wired

separately. Otherwise, fire or malfunction may

result if they are accidentally detached.

English

Connecting the units

Parts supplied

Parts marked (*) are pre-installed.

This product Power cord Holder*

Side bracket (2 pcs.)* Trim ring Frame

Flush surface screw

(5 × 6 mm) (8 pcs.)

(4 pcs. are pre-installed.)

Binding screw

(5 × 6 mm) (8 pcs.)

Binding screw*

(3 × 6 mm) (8 pcs.)

Rubber bush Double-ended screw Touch panel pen

Connecting the units

Connecting the power cord

Speaker leads

White: Front left 

White/black: Front left 

Gray: Front right 

Gray/black: Front right 

Green: Rear left or subwoofer 

Green/black: Rear left or subwoofer 

Violet: Rear right or subwoofer 

Violet/black: Rear right or subwoofer 

ISO connector

Note:

In some vehicles, the ISO connector may be

divided into two. In this case, be sure to connect

to both connectors.

When you connect the separately sold

multi-channel processor (DEQ-P6600) to this

unit, do not connect anything to the speaker

leads and system remote control (blue/white).

Note:

Depending on the kind of vehicle, the

function of 3* and 5* may be different. In

this case, be sure to connect 2* to 5* and

4* to 3*.

Cap (1*)

Do not remove cap if this

terminal is not in use.

Yellow (3*)

Back-up

(or accessory)

Yellow (2*)

Connect to the constant 12 V

supply terminal.

Connect leads of the same

color to each other.

Fuse (10 A)

Fuse resistor

Red (5*)

Accessory

(or back-up)

Red (4*)

Connect to terminal controlled by

ignition switch (12 V DC).

Black (chassis ground)

Connect to a clean, paint-free metal location.

This product

Antenna input

Orange/white

Connect to lighting switch terminal.

Fuse resistor

English

Notes:

· Change the initial setting of this unit (refer to the Operation Manual).

The subwoofer output of this unit is monaural.

· When using a subwoofer of 70 W (2 Ω) , be sure to connect with

Violet and Violet/black leads of this unit. Do not connect anything to

Green and Green/black leads.

Connection method

1. Clamp the lead. 2. Clamp firmly with

needle-nosed pliers.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Light green

Used to detect the ON/OFF status of the parking brake. This lead

must be connected to the power supply side of the parking brake

switch.

Blue/white

Connect to system control terminal of the power

amp (max. 300 mA 12 V DC).

Blue/white (7*)

Connect to auto-antenna relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO

connector will differ depending on

the type of vehicle. Connect 6* and

7* when Pin 5 is an antenna control

type. In other types of vehicles,

never connect 6* and 7*.

Blue/white (6*)

Ground side

Power supply side

Parking brake

switch

Fuse resistor Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

Connecting the units

When connecting to separately sold power amp

















Note:

· Change the initial setting of this unit

(refer to the Operation Manual).

The subwoofer output of this unit is monaural.

Blue/white

Connect to system control

terminal of the power amp

(max. 300 mA 12 V DC).

Blue/white (7*)

Connect to auto-antenna

relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO connector will differ

depending on the type of vehicle. Connect 6*

and 7* when Pin 5 is an antenna control type.

In other types of vehicles, never connect 6* and

7*.

Blue/white (6*)

When you connect the separately sold

multi-channel processor (DEQ-P6600) to this

unit, do not connect anything to the speaker

leads and system remote control (blue/white).

This product

Connect with RCA cables (sold

separately)

Rear speaker

or Subwoofer

Perform these connections when

using the optional amplifier.

System remote control

Front speaker Front speaker

Left Right

Front output

When you connect the multi-channel processor

to this unit, refer to multi-channel processor’s

installation manual for the connection method.

Rear speaker

or Subwoofer

Power amp

(sold separately)

Power amp

(sold separately)

Rear output or

subwoofer output

To front output

To rear output or

subwoofer output

English

Connecting the units

Connecting the system

This product

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

Blue

IP-BUS input

(Blue)

Connecting the units

When connecting with a rear view camera

When this product is used with a rear view camera, it is possible to automatically switch

from the video to rear view image when the gear shift is moved to REVERSE (R).

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY

RESULT IN INJURY OR DAMAGE.

CAUTION

• The screen image may appear reversed.

• The rear view camera function is to be used as an aid for backing into a tight parking spot.

Do not use this function for entertainment purposes.

• Objects in the rear view may appear closer or more distant than they actually are.

RCA cable

(sold separately)

To video output

Rear view camera

Rear view camera input

(REAR CAMERA IN)

This product

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

You must use a camera

which outputs mirror

reversed images.

CAUTION

Fuse resistor

• It is necessary to set Camera Polarity properly in System Menu when connecting the rear view camera.

Andere Handbücher für Super Tuner IIID AVH-P3100DVD

Inhaltsverzeichnis

Sprachen:

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer AVH-A205BT Bedienungsanleitung

Pioneer

Pioneer SPH-EVO64DAB-208 Bedienungsanleitung

Pioneer

Pioneer SX-V90 Bedienungsanleitung

Pioneer

Pioneer X-EM21V Bedienungsanleitung

Pioneer

Pioneer SX-1500T Bedienungsanleitung

Pioneer

Pioneer VSX-D498 Bedienungsanleitung

Pioneer

Pioneer SX-319V-K Bedienungsanleitung

Pioneer

Pioneer HTP-076 Handbuch

Pioneer

Pioneer AVH-601EX Bedienungsanleitung

Pioneer

Pioneer DMH-Z5350TV Bedienungsanleitung

Pioneer

Pioneer XR-P370C Bedienungsanleitung

Pioneer

Pioneer SX-337 Bedienungsanleitung

Pioneer

Pioneer SX-1980 Bedienungsanleitung

Pioneer

Pioneer DMH-WT38NEX Bedienungsanleitung

Pioneer

Pioneer AVH-1300NEX Bedienungsanleitung

Pioneer

Pioneer SX-424 FVZV Bedienungsanleitung

Pioneer

Pioneer SX-1080 Bedienungsanleitung

Pioneer

Pioneer VSX-1130-K Bedienungsanleitung

Pioneer

Pioneer VSX-933 Handbuch

Pioneer

Pioneer AVH-3500NEX Bedienungsanleitung

Pioneer

Pioneer AVH-Z5290BT Bedienungsanleitung

Pioneer

Pioneer SX-5LHE Bedienungsanleitung

Pioneer

Pioneer SX-209RDS Bedienungsanleitung

Pioneer

Pioneer XRB3059-A Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung