Pioneer VSX-LX301 Installationsanleitung

Basic

Manual

Hookup

Step1: Choose your Speaker Layout ...................................... 3

Step2: Connect the Speakers ................................................. 9

Step3: Connect the TV ......................................................... 12

Step4: Connect the AV Components .................................... 14

Step5: Connect Other Cables ............................................... 18

Setup

Step6: Power On & Initial Setup ........................................... 19

HDMI Setup .......................................................................... 20

Playback

Basic Playback ..................................................................... 21

Network Functions ................................................................ 22

Others ................................................................................... 24

Part Names

Front Panel ........................................................................... 26

Rear Panel ............................................................................ 27

Remote Controller ................................................................ 28

Display .................................................................................. 28

The Basic Manual includes information needed when starting up and

also instructions for frequently used operations. The Advanced Manual

has more detailed information and advanced settings.

VSX-LX301

AV Receiver

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

SN29402194_VSX-301_BAS_En.book 1 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

What's in the box

1. Main unit 2. Remote controller (RC-914R)

×1, Batteries (AAA/R03) ×2

3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1

6. Power cord ×1

Main features

This unit is connected between your TV and your AV components. To play, select the source with the input

selector. You can connect 7.1ch of speakers to this unit, with 7ch at 170 W (6 ohms, 1 kHz, 0.9%THD) per

channel plus a powered subwoofer pre out jack.

Supports playback in Dolby Atmos format which provides 360e sound placement

The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2

HDMI CEC functionality: Control features such as linking input switching with the input selector and players

conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-

compliant TV, and automatically switching this unit to standby when the TV is turned off

HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this

unit is in standby

ARC: Connection with an ARC-compatible TV is complete with one HDMI cable

Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV

Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server

that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and

BLUETOOTH

play

Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source

Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2)

You can connect a speaker B system

Equipped with RS-232C port, IR IN/OUT jack, and 12V TRIGGER OUT A/B jacks

We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our

homepage for more information.

CAUTION: Connect speakers with 6 Ω to 16 Ω impedance. The power cord must be connected only after

all other cable connections are completed.

0We will not accept responsibility for damage arising from the connection of equipment manufactured by

other companies.

SN29402194_VSX-301_BAS_En.book 2 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step1: Choose your Speaker Layout

12 Front Speakers

3Center Speaker

45 Surround Speakers

6Powered Subwoofer

For 5.1-Channel System

This is a 5.1-channel system that is the basic surround system.

Front speakers output front stereo sound and a center speaker outputs center

sound such as dialogs and vocals. Surround speakers create back sound

field. Powered subwoofer reproduces bass sounds and creates rich sound

field. The front speakers should be positioned at ear height, while the

surround speakers should be positioned just above ear height. Center

speaker should be set up facing the listening position. Place the powered

subwoofer towards the front. Placing it between the center speaker and a front

speaker gives you a natural sound even when playing music.

0The front speakers, center speaker, and surround speakers are counted as

5 channels, and the powered subwoofer is counted as 0.1 of a channel,

giving us the name 5.1ch system.

Go To "Hookup" (



P9)

＊1: 22e to 30e, ＊2: 120e

Speaker B System

In a 5.1-Channel System, you can

connect one more set of front

speakers to use as a Speaker B

System. In this state, the 5.1-

Channel System becomes the

Speaker A System and you can

switch the same audio to output from

A, B, or A+B. Note that sound is not

output from Speaker B when Zone

Speaker is used (



P17).

Go To "Hookup" (



P9)

＊1

＊2

SN29402194_VSX-301_BAS_En.book 3 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

(



P3)

78 Surround Back Speakers

For 7.1-Channel System (with

Surround Back Speakers)

This is a system with surround back speakers added to the basic 5.1-channel system.

The connection of surround back speakers improves the sense of envelopment and

connectivity of sound created by the back sound field and provides a more real sound

field. You can select the Dolby Atmos listening mode, which realizes the most up-to-date

3D surround sound, when the input format is Dolby Atmos. With formats other than

Dolby Atmos, you can still create a sound field by outputting sound from the surround

back speakers when you select the Dolby Surround listening mode. The optimal

positioning is for surround back speakers to be at ear height. Place the surround

speakers in a more slightly forward position than you would in a 5.1-channel system.

0If you are including surround back speakers in the setup, surround

speakers are required.

Go To "Hookup" (



P9)

＊1: 22e to 30e, ＊2: 90e to 110e, ＊3: 135e to 150e

Speaker B System

In a 7.1-Channel System (with Surround

Back Speakers), you can connect one more

set of front speakers to use as a Speaker B

System. In this state, the 7.1-Channel

System becomes the Speaker A System

and you can switch the same audio to

output from A, B, or A+B. Note that sound is

not output from the surround back speaker

when A+B is selected.

Note that sound

is not output from Speaker B when

Zone Speaker is used (



P17)

Go To "Hookup" (



P9)

＊2

＊3

＊1

SN29402194_VSX-301_BAS_En.book 4 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

3´ (0.9 m)

or more

(



P3)

9: Height Speakers

Choose one of the following:

Front High Speakers

Rear High Speakers

For 7.1-Channel System

(with Height Speaker-A)

This is a basic 5.1-channel system with the addition of height speakers, either

as front high speakers or rear high speakers. Select which speakers to setup

according to the environment of the room. You can select the Dolby Atmos

listening mode (5.1.2 channel playback), which realizes the most up-to-date

3D surround sound including overhead sounds, when the input format is Dolby

Atmos. With formats other than Dolby Atmos, you can still create a sound field

by outputting sound from the height speakers when you select the Dolby

Surround listening mode. Front high speakers or rear high speakers should be

situated at least 0.9 m higher than the front speakers. Front high speakers

should be situated directly above the front speakers and the distance between

the rear high speakers should match the distance between the front speakers.

Both should be set up facing the listening position.

Go To "Hookup" (



P10)

＊1: 22e to 30e, ＊2: 120e

＊1

＊2

SN29402194_VSX-301_BAS_En.book 5 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

(



P3)

9: Height Speakers

Choose one of the following:

Top Front Speakers

Top Middle Speakers

Top Rear Speakers

For 7.1-Channel System

(with Height Speaker-B)

This is a basic 5.1-channel system using ceiling speakers, for example, with

the addition of height speakers, either as top front speakers, top middle

speakers, or top rear speakers. Select which speakers to setup according to

the environment of the room. You can select the Dolby Atmos listening mode

(5.1.2 channel playback), which realizes the most up-to-date 3D surround

sound including overhead sounds, when the input format is Dolby Atmos. With

formats other than Dolby Atmos, you can still create a sound field by

outputting sound from the height speakers when you select the Dolby

Surround listening mode. Fit top front speakers on the ceiling forward of the

seating position, top middle speakers on the ceiling directly above the seating

position, and top rear speakers on the ceiling behind the seating position. The

distance between each pair should match the distance between the two front

speakers.

0Dolby Laboratories recommends placing this type of height speakers to

obtain the best Dolby Atmos effect.

Go To "Hookup" (



P10)

＊1: 30e to 55e, ＊2: 65e to 100e, ＊3: 125e to 150e

＊1

＊2

＊3

SN29402194_VSX-301_BAS_En.book 6 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

(



P3)

9: Height Speakers

Choose one of the following:

Dolby Enabled Speakers (Front)

Dolby Enabled Speakers (Surround)

Dolby Enabled Speakers (Surround Back)

For 7.1-Channel System

(with Height Speakers-C)

This is a basic 5.1-channel system that using Dolby enabled speakers, with

the addition of height speakers, either as Dolby enabled speakers (front) or

Dolby enabled speakers (surround) or Dolby enabled speakers (surround

back). Select which speakers to setup according to the environment of the

room. Dolby enabled speakers are special speakers designed to face the

ceiling so that sound is heard after bouncing off the ceiling so that sound

appears to be coming from overhead. You can select the Dolby Atmos

listening mode (5.1.2 channel playback), which realizes the most up-to-date

3D surround sound including overhead sounds, when the input format is Dolby

Atmos. With formats other than Dolby Atmos, you can still create a sound field

by outputting sound from the height speakers when you select the Dolby

Surround listening mode. Place them either above the front speakers or above

the surround speakers or surround back speakers. If they are integrated Dolby

enabled speakers, put in place of the front speakers, the surround speakers,

or the surround back speakers.

Go To "Hookup" (



P10)

＊1: 22e to 30e, ＊2: 90e to 120e, ＊3: 135e to 150e

＊1

＊2

＊3

SN29402194_VSX-301_BAS_En.book 7 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

12 Front Speakers (Bi-Amping)

3Center Speaker

45 Surround Speakers

6Powered Subwoofer

For Bi-Amping the Speakers

It is possible to connect front speakers supporting Bi-Amping to improve

quality of the bass and treble. The maximum number of channels available

with this connection is 5.1 because Bi-Amping speakers require one amplifier

for the tweeter jacks and one amplifier for the woofer jacks. The effects and

placements for speakers are the same as the 5.1-channel plan that doesn't

use Bi-Amping speakers.

Go To "Hookup" (



P11)

＊1: 22e to 30e, ＊2: 120e

＊1

＊2

SN29402194_VSX-301_BAS_En.book 8 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step2: Connect the Speakers

1/2˝

(12 mm)

Speaker B

1 Speaker cable, 2 Subwoofer cable

in case of:

Pages 3 to 4

Connect 123456 for a 5.1-channel system. With a

7.1-Channel System (with Surround Back Speakers), also

connect 7 and 8. Up to two powered subwoofers can be

connected. The same signal is output from each of the

SUBWOOFER jacks. With this connection, you can

connect one more set of front speakers to use as a

Speaker B System. Switch Speakers A/B with AV Adjust

(



P25). Note that sound is not output from the surround

back speaker when A+B is selected.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

Setup

0Settings for the speaker configuration you have

connected need to be made in "1. Full Auto

MCACC" (



P19) in Initial Setup.

SN29402194_VSX-301_BAS_En.book 9 ページ２０１６年３月１４日　月曜日　午後８時１０分

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

1/2˝

(12 mm)

1 Speaker cable, 2 Subwoofer cable

in case of:

Pages 5 to 7

Connect 1234569:. Up to two powered

subwoofers can be connected. The same signal is output

from each of the SUBWOOFER jacks.

0Apart from these connections, you can also connect

surround back speakers ⑦ and ⑧. However, you can

only output audio from one set of ⑦⑧ or ⑨⑩ at a time.

When both are connected, you can select which

speakers to prioritize with AV Adjust (



P25).

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

Setup

0Settings for the speaker configuration you have

connected need to be made in "1. Full Auto

MCACC" (



P19) in Initial Setup.

SN29402194_VSX-301_BAS_En.book 10 ページ２０１６年３月１４日　月曜日　午後８時１０分

Andere Handbücher für VSX-LX301

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer DMH-A345BT Bedienungsanleitung

Pioneer

Pioneer VSX-D3S Bedienungsanleitung

Pioneer

Pioneer AVH-4400BT Bedienungsanleitung

Pioneer

Pioneer DMH-220EX Bedienungsanleitung

Pioneer

Pioneer AVH-3500DVD Bedienungsanleitung

Pioneer

Pioneer DMH-A5450BT Bedienungsanleitung

Pioneer

Pioneer VSX-D901S Bedienungsanleitung

Pioneer

Pioneer DMH-Z5290BT Bedienungsanleitung

Pioneer

Pioneer SX-1000TD Bedienungsanleitung

Pioneer

Pioneer SX-700L Bedienungsanleitung

Pioneer

Pioneer SX-690HG Bedienungsanleitung

Pioneer

Pioneer AVH-P6600DVD/UC Bedienungsanleitung

Pioneer

Pioneer AVH-A200BT Bedienungsanleitung

Pioneer

Pioneer AVH-G115DVD Bedienungsanleitung

Pioneer

Pioneer SX-3900 Bedienungsanleitung

Pioneer

Pioneer AVH-295BT Bedienungsanleitung

Pioneer

Pioneer AVH-Z5190BT Bedienungsanleitung

Pioneer

Pioneer SX-2600 Bedienungsanleitung

Pioneer

Pioneer VSX1017TXV Bedienungsanleitung

Pioneer

Pioneer SX-1280 Bedienungsanleitung

Pioneer

Pioneer SX-535 Bedienungsanleitung

Pioneer

Pioneer VSX916 Bedienungsanleitung

Pioneer

Pioneer SX-2300 Bedienungsanleitung

Pioneer

Pioneer SX-850 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung