Pioneer VSX-LX504 Bedienungsanleitung

Front Panel≫Rear Panel≫Remote≫

AV RECEIVER

Instruction

Manual

VSX-LX504

Table of contents ≫

Connections ≫

- Connecting Speakers ≫

Playback ≫

Setup ≫

Troubleshooting ≫

Appendix ≫

Supplementary Information ≫

Contents

Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Table of contents

What’s in the box 5

Additional Function (Firmware Update) 6

Update Information of the rmware 6

Operation of added new functions 6

Firmware Update Procedure 7

Part Names 10

Front Panel 10

Display 12

Rear Panel 13

Remote Controller 16

Connections

Connecting speakers 19

Speaker Installation 20

Speaker Connections and "Speaker Setup" Settings 47

Connecting a Power Amplier 67

Speaker combinations 68

Connecting the TV 71

To ARC/eARC TV 72

To Non-ARC TV 73

Connecting Playback Devices 74

Connecting an AV Component with HDMI Jack

Mounted 74

Connecting an AV Component without HDMI Jack

Mounted 75

Connecting an Audio Component 76

Connecting a Video Camera, etc. 77

Connecting an AV Component in a Separate Room

(Multi-zone Connection) 78

Connecting a TV (ZONE 2) 78

Connecting a Pre-main Amplier (ZONE 2) 79

Connecting a Pre-main Amplier (ZONE 3) 80

Connecting ZONE B 81

Connecting a Pre-main Amplier, etc. (ZONE B) 81

Connecting Antennas 82

Network Connection 83

Connecting External Control Devices 84

IR IN/OUT port 84

12V TRIGGER OUT jack 85

Connecting the Power Cord 86

Playback

AV Component Playback 88

Basic Operations 88

BLUETOOTH®Playback 89

Basic Operations 89

Internet Radio 90

3Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Playing Back 90

Spotify 92

AirPlay®93

Playing Back on This Unit 93

Playing Back on multiple devices (AirPlay2) 94

DTS Play-Fi®95

Playing Back 95

FlareConnectTM 96

Playing Back 96

USB Storage Device 97

Basic Operations 97

Device and Supported Format 99

Playing back les on a PC and NAS (Music Server) 100

Windows Media®Player settings 100

Playing Back 101

Supported Audio Formats 104

Play Queue 105

Initial Setup 105

Adding Play Queue Information 105

Sort and Delete 106

Playing Back 106

Amazon Music 107

Registering this unit with Amazon Music 107

Playing Amazon Music 107

Connecting the Sonos System for Playback 108

Necessary Equipment 108

How to Connect This Unit and Sonos Connect 108

Setting Up 108

Playing Sonos on This Unit 109

Listening To the AM/FM Radio 110

Tuning into a Radio Station 110

Presetting a Radio Station 112

Using RDS (European, Australian and Asian models)114

Multi-zone 115

Playing Back (ZONE 2) 116

Playing Back (ZONE 3) 118

ZONE B Playback 120

Playing Back 120

Convenience functions 121

Using PERSONAL PRESET 121

Adjusting the tone 123

Sleep Timer 125

Listening Mode 126

Selecting a Listening mode 126

Speaker Layouts and Selectable Listening Modes 129

Listening Mode E󰀨ects 132

4Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Input Formats and Selectable Listening Modes 136

Inputting Characters 142

Setup

System Setup 143

Menu list 143

Menu operations 145

Input/Output Assign 146

Speaker 150

Audio Adjust 155

Source 157

Hardware 159

Multi Zone 166

Miscellaneous 168

Advanced MCACC 170

Menu operations 170

Full Auto MCACC 171

Manual MCACC 172

MCACC Data Check 174

Network/Bluetooth 175

Menu operations 175

Network 176

Bluetooth 178

AV Adjust 179

Menu operations 179

Web Setup 181

Menu operations 181

Initial Setup with Auto Start-up Wizard 182

Operations 182

Troubleshooting

When the unit is operating erratically 186

Troubleshooting 188

Appendix

Reducing the Power Consumption in Standby State 197

About HDMI 198

General Specications 200

5Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

What’s in the box

1. Main unit (1)

2. Remote controller (RC-974R) (1), Batteries (AAA/R03) (2)

3. Speaker setup microphone (1)

• Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

6. Power cord (1)

• Quick Start Guide (1)

*This document is an online instruction manual. It is not included as an

accessory.

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Network services and content that can be used may no longer be available

if new functions are added by updating rmware or the service providers

terminate their services. Also, available services may di󰀨er depending on your

area.

• Details on the rmware update will be posted on our website and through

other means at a later date.

• The illustrations in this manual use those of North American models unless

otherwise mentioned.

• Specications and appearance are subject to change without prior notice.

6Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Additional Function (Firmware Update)

This unit is equipped with a function to update the rmware via network or USB port when the rmware update is announced after purchase. This enables various

functions to be added and operations to be improved.

Depending on the manufacturing timing of the product, the rmware may be switched to the updated one. In such a case, new functions may be added from the start.

For how to conrm the latest rmware contents and the rmware version of your product, see the following section.

Update Information of the rmware

For the latest rmware contents and the rmware version, visit our company’s website. If the rmware version of your product di󰀨ers from the latest one, it is

recommended to update the rmware.

To conrm the rmware version of your product, press the button on the remote controller to display the Home screen, and refer to "System Setup" - "Miscellaneous"

- "Firmware Update" - "Version" ( p168).

Operation of added new functions

If functions are added or changed from contents described in the Instruction Manual, see the following reference.

Supplementary Information ≫

❏Firmware Update Procedure ( p7)

7Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

Firmware Update Procedure

The update may take approx. 20 minutes to complete via network or via USB

port. Existing settings are guaranteed in either updating method.

When this unit is connected to the network, notications of rmware updates may

be displayed. To update the rmware, select "Update Now" with the cursors on

the remote controller, and press the ENTER button. The unit automatically enters

standby mode after "Completed!" is displayed, and the update is completed.

Disclaimer: The program and accompanying online documentation are furnished

to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective prots, loss of data, or for any other reason whatsoever.

Updating the Firmware via Network

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Check that the unit is turned on, and the connection to the Internet is secured.

• Turn o󰀨 the controller components (PC etc.) connected to the network.

• Stop any playing Internet radio, USB storage device, or server content.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Press .

The Home screen is displayed on the TV screen.

2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

NET" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

• If there is no updatable rmware, "Update via NET" cannot be selected.

3. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• When "Completed!" is displayed, the update is complete.

4. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

8Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

LAN cable not found. Connect the LAN cable properly.

• -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,

-21:

Internet connection error. Check the following:

– Whether the router is turned on

– Whether this unit and the router are connected via the network

Unplug and plug the power cords of this unit and the router. This may solve

the problem. If you are still unable to connect to the Internet, the DNS server

or proxy server may be temporarily down. Check the server operation status

with your Internet service provider.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Updating via USB

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

– Accessing this unit from a PC or smartphone using their applications

• Prepare a 256 MB or larger USB storage device. The format of USB storage

devices supports FAT16 or FAT32 le system format.

– Media inserted into a USB card reader may not be used for this function.

– USB storage devices equipped with the security function are not supported.

– USB hubs and USB devices equipped with the hub function are not

supported. Do not connect these devices to the unit.

• Delete any data stored on the USB storage device.

• Turn o󰀨 control devices (PC etc.) connected to the network.

• Stop an Internet radio, USB storage device, or server content being played.

• If the multi-zone function is active, turn it o󰀨.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O󰀨".

* Depending on the USB storage device or its content, long time may be required

for loading, the content may not be loaded correctly, or power may not be supplied

correctly.

* Our company will not be liable whatsoever for any loss or damage of data, or storage

failure arising from the use of the USB storage device. Please note this in advance.

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Connect the USB storage device to your PC.

2. Download the rmware le from our company's website to your PC and unzip.

Firmware les are named as below.

PIOAVR_R.zip

Unzip the le on your PC. The number of unzipped les and folders varies

depending on the model.

3. Copy all unzipped les and folders to the root folder of the USB storage

device.

• Make sure to copy the unzipped les.

4. Connect the USB storage device to the USB port of this unit.

• If an AC adapter is supplied with the USB storage device, connect the AC

adapter, and use it with a household outlet.

• If the USB storage device has been partitioned, each section will be treated

as an independent device.

5. Press .

The Home screen is displayed on the TV screen.

9Front Panel≫Rear Panel≫Remote≫

Contents

≫Connections

≫Playback

≫Setup

≫

6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

USB" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

• If there is no updatable rmware, "Update via USB" cannot be selected.

7. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• During the update, do not turn the power o󰀨, or disconnect or reconnect the

USB storage device.

• When "Completed!" is displayed, the update is complete.

8. Disconnect the USB storage device from the unit.

9. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

The USB storage device cannot be recognized. Check if the USB storage

device or USB cable is securely inserted to the USB port of the unit.

Connect the USB storage device to an external power source if it has its own

power supply.

• -05, -13, -20, -21:

The rmware le is not present in the root folder of the USB storage device, or

the rmware le is for another model. Retry from the download of the rmware

le.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Contents

≫Connections

≫Playback

≫Setup

≫

Front Panel≫Rear Panel≫Remote≫

Part Names

Front Panel

❏For details, see ( p11)

3457689bkblb

bo cnbp bq br bs bt ck cl cm co cp

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer VSX-530-K Bedienungsanleitung

Pioneer

Pioneer SX-1000TD Bedienungsanleitung

Pioneer

Pioneer SX-3500 Bedienungsanleitung

Pioneer

Pioneer AVH-1300NEX Bedienungsanleitung

Pioneer

Pioneer VSX-531D Bedienungsanleitung

Pioneer

Pioneer VSX-D498 Bedienungsanleitung

Pioneer

Pioneer DIVX AVH-A210BT Bedienungsanleitung

Pioneer

Pioneer VSX-D308 Bedienungsanleitung

Pioneer

Pioneer VSX-605S Bedienungsanleitung

Pioneer

Pioneer Elite SC-82 Bedienungsanleitung

Pioneer

Pioneer MVH-AV251BT Bedienungsanleitung

Pioneer

Pioneer AVH-4850BT Bedienungsanleitung

Pioneer

Pioneer VSX-531-B Bedienungsanleitung

Pioneer

Pioneer DMH-WT3800NEX Bedienungsanleitung

Pioneer

Pioneer SX-626 KCW Bedienungsanleitung

Pioneer

Pioneer AVH-X8500BT Bedienungsanleitung

Pioneer

Pioneer DMH-A241 BT Bedienungsanleitung

Pioneer

Pioneer VSX-D704S Bedienungsanleitung

Pioneer

Pioneer VSX-07TX Bedienungsanleitung

Pioneer

Pioneer Elite SX-A9-J Bedienungsanleitung

Pioneer

Pioneer AVH-G225BT Bedienungsanleitung

Pioneer

Pioneer SX-1500T Bedienungsanleitung

Pioneer

Pioneer VSX-D906S Bedienungsanleitung

Pioneer

Pioneer HTP-2900 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung