Pioneer VSX-S520 Bedienungsanleitung

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 6

Display .................................................................................... 7

Install

1. Connect the Speakers ........................................................ 8

2. Connect the TV ..................................................................11

3. Connect the HDMI AV Components ................................. 12

4. Connect the Audio Components ....................................... 13

5. Connect Other Cables ...................................................... 14

Initial Setup

Initial Setup with Auto Start-up Wizard ................................. 15

Playback

AV Component Playback ...................................................... 18

Internet Radio ....................................................................... 19

Spotify ................................................................................... 21

Music Server ......................................................................... 22

USB Storage Device ............................................................. 24

AirPlay

................................................................................ 26

BLUETOOTH

Playback ...................................................... 27

Listening to the FM/DAB Radio ............................................ 28

Listening Modes ................................................................... 31

AV Adjust .............................................................................. 40

Advanced Setup

System Setup ........................................................................ 42

MCACC ................................................................................. 51

Network/Bluetooth ................................................................. 54

Firmware Update

Firmware Update .................................................................. 57

Others

Troubleshooting .................................................................... 60

General Specifications .......................................................... 65

About HDMI .......................................................................... 67

License and Trademark Information ..................................... 68

Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

AV RECEIVER

VSX-S520D

VSX-S520

Instruction

Manual

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Before Star t

What's in the box

Connect speakers with

Ωto

Ωimpedance.

0The power cord must be connected only after all other cable connections are completed.

0We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future. Furthermore, available services may vary depending on your area of

residence.

0Specifications and appearance are subject to change without prior notice.

0We plan to provide support for the Dolby Atmos and DTS:X audio format through a

firmware update for this unit. Refer to our website for more information.

Main unit (1)

Remote controller (RC-933R) (1), batteries (AAA/R03) (2)

Speaker setup microphone (1)

DAB/FM antenna (1) (VSX-S520D)

Indoor FM antenna (1) (VSX-S520)

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Part Names

Front Panel

1. ÍSTANDBY/ON button: Turns the unit on or into standby mode.

2. Display (ÄP7)

3. Remote control sensor

4. INPUT SELECTOR dial: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /

STRM BOX / CD / TV / PHONO / DAB (VSX-S520D) / FM / NET / USB / BT AUDIO)

5. MASTER VOLUME dial: Allows you to adjust the volume.

6. PHONES jack: Stereo headphones with a mini plug (

3.5 mm) are connected.

7. MCACC SETUP MIC jack: The supplied speaker setup microphone is connected.

8. USB port: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.

9. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the

display off.

10.

NETWORK indicator: When the power of the unit is on, this lights when "NET" is selected

with the input selector and the unit is connected to the network. If the unit is in standby

mode, this lights when functions such as HDMI CEC and Network Standby are enabled.

 









> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Rear Panel

1. ANTENNA DAB / FM jack: Connect the supplied antenna.

2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

4. SIGNAL GND terminal: The ground wire of the turntable is connected.

5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

6. Power cord

7. NETWORK port: Connect to the network with an Ethernet cable.

8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

10.

SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.

11.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

180°

90°



 







 







VSX-S520D

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

1. ANTENNA FM UNBAL 75hjack: Connect the supplied antenna.

2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

4. SIGNAL GND terminal: The ground wire of the turntable is connected.

5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

6. Power cord

7. NETWORK port: Connect to the network with an Ethernet cable.

8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

10.

SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.

11.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

180°

90°



 







 







VSX-S520

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Remote Controller

1. Íbutton: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. (AV ADJUST) button: You can perform common settings on the TV screen. (ÄP40)

4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

5. button: Displays the Home.

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7. button: Temporarily mutes audio. Press again to cancel muting.

8. Listening mode buttons: Allows you to select the listening mode. (ÄP31)

9. Play buttons: You can start play of the Music Server or USB.

10.

button: You can start repeat or random play of the Music Server or USB.

CLEAR button: Deletes all characters you have entered when entering text on the TV

screen.

11.

(STATUS) button: Switches the information on the display.

12.

button: Returns the display to the previous state during setting.

13.

DIMMER button: You can switch the display off or adjust the brightness of the display in

three steps.

14.

MODE button: Switches tuning to an FM station between automatic tuning and manual

tuning.

15.

+Fav button: Used to register FM/DAB radio stations.































30°

Approx.5 m

(16 ft.)

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Display

1. Lights in the following conditions.

HDMI: HDMI signals are input and selected.

ARC: Audio signals from the ARC compatible TV are input and selected.

USB: When "USB" is selected with the input selector and the unit is connected by USB

and the USB device is selected. Flashes if the USB is not properly connected.

NET: When "NET" is selected with the input selector and the unit is connected to the

network. It will flash if the connection to the network is not correct.

DIGITAL: Digital signals are input and the digital input selector is selected.

2. Lights when operating the "NET" or "USB" input selector indicating remote controller

cursor operations are possible in screens showing list of tracks, for example.

3. Lights when headphones are connected.

4. Lights when operating the "NET" or "USB" input selector when tracks are played or

paused.

5. Lights according to the type of input digital audio signals and the listening mode.

6. Lights in the following conditions.

RDS (European models): Receiving RDS broadcasting.

AUTO: When FM tuning mode is auto.

TUNED: Receiving FM radio.

FM STEREO: Receiving FM stereo.

SLEEP: Sleep timer has been set.

ASb: When Auto Standby function is enabled. (ÄP49)

7. Flashes when muting is on.

8. Displays various information of the input signals. Characters that cannot be displayed on

this unit are replaced with asterisks ( ＊).



Neo:6









 

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Ins tall

1. Connect the Speakers

＊1

＊2

＊1: 22eto 30e, ＊2: 120e

12 Front Speakers

3Center Speaker

45 Surround Speakers

6Subwoofer

Install the speakers

Front speakers output front stereo sound and a center

speaker outputs center sound such as dialogs and vocals.

Surround speakers create back sound field. Subwoofer

reproduces bass sounds and creates rich sound field.

The front speakers should be positioned at ear height, while

the surround speakers should be positioned just above ear

height. Center speaker should be set up facing the listening

position. Place the powered subwoofer towards the front.

Placing it between the center speaker and a front speaker

gives you a natural sound even when playing music.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

aspeaker cable, bsubwoofer cable

1/2˝

(12 mm)

FRONT

SURROUND

CENTERFRONT

Powered

Subwoofer

Connect the speakers

Refer to the illustration to connect the speaker system.

Twist the wires of the speaker cable tightly before inserting

into the terminals. Make correct connection between the

unit’s jacks and speaker’s jacks (+ to + and – to –) for each

channel. If connection is wrong, a bass sound may become

poor due to reverse phase.

Either a powered subwoofer or passive subwoofer may be

connected. To connect a powered subwoofer, use a

subwoofer cable and connect to the SUBWOOFER PRE

OUT jack. To connect a passive subwoofer, connect to the

SPEAKERS terminals with speaker cables as shown below.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

Make sure the exposed wires of the speakers do not stick

out of the speaker terminals when connecting. If the

exposed wires of the speakers touch the rear panel or the +

and – wires touch each other, the protection circuit will be

activated. (ÄP60)

Setup

0Settings for the speaker configuration you have

connected need to be made in "1. Full Auto MCACC"

(ÄP16) in Initial Setup.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer ELITE VSX-LX305 Handbuch

Pioneer

Pioneer VSX-934 Bedienungsanleitung

Pioneer

Pioneer VSX-455 Bedienungsanleitung

Pioneer

Pioneer DMH-WT38NEX Bedienungsanleitung

Pioneer

Pioneer SX-40 Bedienungsanleitung

Pioneer

Pioneer AVH-Z5190BT Bedienungsanleitung

Pioneer

Pioneer AVH-X7850BT Bedienungsanleitung

Pioneer

Pioneer SX-1500TD Bedienungsanleitung

Pioneer

Pioneer DMH-341EX Bedienungsanleitung

Pioneer

Pioneer SX-1080 Bedienungsanleitung

Pioneer

Pioneer SX-337 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7050TV Bedienungsanleitung

Pioneer

Pioneer SX-525 KW Bedienungsanleitung

Pioneer

Pioneer XR-P2000 Bedienungsanleitung

Pioneer

Pioneer VSX-322-K Bedienungsanleitung

Pioneer

Pioneer SX-450 Bedienungsanleitung

Pioneer

Pioneer DMH-Z5290BT Bedienungsanleitung

Pioneer

Pioneer SX-202 Bedienungsanleitung

Pioneer

Pioneer AVH-3300NEX Bedienungsanleitung

Pioneer

Pioneer VSX-425 Bedienungsanleitung

Pioneer

Pioneer VSX-531D Bedienungsanleitung

Pioneer

Pioneer SX-1000TW Service-Handbuch

Pioneer

Pioneer VSX-934 Bedienungsanleitung

Pioneer

Pioneer VSX-834 Handbuch

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung