PiXORD PB731P Bedienungsanleitung

Quick Guide

1 Hardware Overview

Front View

Rear View

Left Side View

Figure 1-1 PB731P/731I Cloud Wi-Fi Network Camera Outer Shell Profiles

Network

Connector

DC5V Input

WPS Button

Reset Button

Label

Power/Network

LED Indicator

Wireless LED

Indicator

Micro SD Card Slot

Speaker

Light Sensor

Focus

Adjustment Ring

Infrared LED (IR Model)

PIR Sensor (PIR Model)

LED (for PIR Model)

Built-in

Microphone

Power/Network

LED Indicator

Wireless LED

Indicator

2 Connecting Camera to Network

Figure 2-1 Connecting Camera to Network with PC/Notebook/Ultrabook

1. Prepare a smartphone/tablet or PC/notebook/ultrabook with Ethernet link to the local network.

2. When using PC/notebook/ultrabook as host, connect the LAN port of the host to the network router

with an RJ45 network cable ().

NOTE: If you are going to use smartphone/tablet as monitoring device, the PC/notebook/ultrabook is

required only to set up your camera with the “Installation Guide Wizard” program from the

CD (included in the camera package) as described in Section 4.

3. Plug the DC power jack of the power adaptor () to Camera and connect the power adaptor to

power outlet (110V or 220V).

4. Connect the network router to the LAN port of Camera with an RJ45network cable ().

5. With power switched on, check the status of the two LEDs at the left corner of camera:

If the Power/Network indicator (upper LED) turns into green color, it confirms that the Camera

has successfully linked with the Internet. Then proceed to the next Section 3 “iPIXORD

Registration”to register your newly installed camera.

If the camera is set up to work on Wi-Fi, the Wireless LED Indicator (lower LED) will light up in

blue to indicate successful connection, while the upper LED remains in orange.

Figure 2-2 Power/Network (Upper LED)& Wireless LED (Lower LED) Indicators

Power/Network LED Indicator

should light up in green to indicate

successful link to the Internet

Wireless LED Indicator lights up (in

blue) only when the Camera is set

up & connected to Wi-Fi

LAN Router

Power Adaptor

The PC host is required

only to set up the camera

with “Installation Guide

Wizard” program when the

camera Power/Network

LED Indicator does not light

up in green within few

seconds after power on.

If the upper LED does not turn green (or the lower LED does not turn blue), it means your Camera

failed to properly connect with Internet. Proceed to Section 4, “Installation Guide Wizard” for

more detailed installation guide to help you achieve Internet connection successfully.

3 iPIXORD Registration

3.1 iPIXORD Registration by Smartphones/Tablets

1. PIXORD offers a more convenient method of registering and monitoring your Camera through

smartphones or tablets via “iPIXORD”software tool. It is done by simply touching the “APP

Store”icon (for iPhone/iPad) or “Google Play”store icon (for Android Mobiles). Then key-in

“iPIXORD” and the “iPIXORD App” icon will display.

“iPIXORD”

(iPIXORD App Icon)

Figure 3-1 Accessing iPIXORD App from Smartphones/Tablets

Alternatively, you may scan the QR Code below to download URL and directly install

“iPIXORD App”in your smartphone/tablet.

Figure 3-2 Scan QR Codes to Directly Access iPIXORD App from Smartphones/Tablets

2. Touch “iPIXORD App” icon to launch iPIXORD. The following dialog will then display.

(iPhone/iPad Display) (Android Mobile Display)

Figure 3-3 Creating & Registering New iPIXORD Account in iPIXORD App

Then touch the “Create Account” button to create your new iPIXORD account.

Alternatively, if you already have a Google Account, you can click on the “Google Account”

button to log-in and register with iPIXORD.

NOTE: a) Google Account provides 5GB free space for recorded video storage. For more on

setting details, please see the User’s Manual (available from the CD).

b) If “Google Account”is used to create the iPIXORD account, you have to touch

“Google Account”button every time you need to log-in iPIXORD again.

c) Please make sure to use Gmail Address for Google Login

3. With iPIXORD account successfully implemented, the “Camera List” dialog will display to

prompt you to start the new Camera(s) registration process as described below:

NOTE: Make sure the Camera(s) is properly connected with Internet.

1) Touch the “Add Camera” button

2) Touch the “Next” button

3) Get ready to scan the new Camera

QR Code card (see Figure 3-4

below) with smartphone/tablet.

4) After scanning the QR Code card, touch

the “Next” button

5) MAC Address of the new Camera

will be treated as its default name.

While new Camera is added to the

existing list, just touch the Camera

name to view the on-line video

6) Live on-line video is now on display.

Activation card (with Activate Code and QR Code) is unique to each Camera. It is included in the

Camera package. Note that the card contains data that are very crucial to initial and subsequent

installations of your camera. Effort should be made to preserve the card.

(Front Side View) (Rear Side View)

Figure 3-4 Unique Activation Card for Each Individual Camera

In case the QR Code card indeed got lost, contact PiXORD Technical Support website at

http://www.pixord.com/contact2.asp

3.1 iPIXORD Registration by PC/Notebook/Ultrabook

You may use PC/Notebook/Ultrabook to register your new Camera account through browser, such as

IE, Chrome, Firefox, etc. For details, please refer to the User’s Manual (available from the CD).

4 Installation Guide Wizard

When the Power/Network indicator (upper LED) does not turn GREEN which indicates that the Camera

failed to properly connect with the Internet, insert the CD (included in the package) into your computer

CD-ROM Drive and the “Installation Guide Wizard” program will launched automatically. The Wizard

provides an easy step-by-step installation guide that will ensure successful connection of your Camera to

Internet.

Note that the Power/Network indicator (upper LED) will turn green color to confirm that the Camera has

successfully linked with the Internet.

Figure 4-1 Power/Network (Upper LED)& Wireless LED (Lower LED) Indicators

You can also download the “Installation Guide Wizard” program by accessing PiXORD website at

http://www.pixord.com/support/software.asp

5 Advanced Settings

For further information on latest advanced settings, please visit PiXORD FAQ website at

http://www.pixord.com/support/faq.asp

For other details and inquiries regarding guarantee and warranty matters, please visit PiXORD official

website at http://register.pixord.com/register/

Power/Network LED Indicator

should light up in green to indicate

successful link to the Internet

Wireless LED Indicator lights up (in

blue) only when the Camera is

connected through and set to Wi-Fi

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PiXORD Sicherheitskamera Handbücher

PiXORD

PiXORD PD637 Bedienungsanleitung

PiXORD

PiXORD P-600 Bedienungsanleitung

PiXORD

PiXORD PL621 Bedienungsanleitung

PiXORD

PiXORD PD636 Bedienungsanleitung

PiXORD

PiXORD PL721 Bedienungsanleitung

PiXORD

PiXORD PB670 Bedienungsanleitung

PiXORD

PiXORD P606 Bedienungsanleitung

PiXORD

PiXORD PD737 Bedienungsanleitung

PiXORD

PiXORD H.264 Series Bedienungsanleitung

PiXORD

PiXORD P-600 Bedienungsanleitung

PiXORD

PiXORD PD736 5MP Bedienungsanleitung

PiXORD

PiXORD PD771 Bedienungsanleitung

PiXORD

PiXORD P-463 Bedienungsanleitung

PiXORD

PiXORD P-600 Bedienungsanleitung

PiXORD

PiXORD P-465 Bedienungsanleitung

PiXORD

PiXORD P-505 Bedienungsanleitung

PiXORD

PiXORD P-423 Bedienungsanleitung

PiXORD

PiXORD P606 Bedienungsanleitung

PiXORD

PiXORD PD736 Bedienungsanleitung

PiXORD

PiXORD 261 series Bedienungsanleitung

PiXORD

PiXORD PD636 Bedienungsanleitung

PiXORD

PiXORD PS760D Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung