Planet Networking & Communication DKVM-1700 Bedienungsanleitung

Drawer KVM Console

With 17” LCD

DKVM-1700

User’s Manual

Version 1.1

The products and programs described in this User’s Manual are licensed products of PLANET

Technology, This User’s Manual contains proprietary information protected by copyright, and this

User’s Manual and all accompanying hardware, software, and documentation are copyrighted.

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to

any electronic medium or machine-readable form by any means by electronic or mechanical.

Including photocopying, recording, or information storage and retrieval systems, for any purpose

other than the purchaser's personal use, and without the prior express written permission of

PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments

and applications, and makes no warranty and representation, either implied or expressed, with

respect to the quality, performance, merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims

liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a

commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies

that may be contained in this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right to make improvements to

this User’s Manual and/or to the products described in this User’s Manual, at any time without

notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would

appreciate your comments and suggestions.

FCC

This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received. Including interference that may cause

undesired operation.

This equipment is in compliance with the requirements of the following regulations: EN 55 022:

CLASS B

WEEE regulation

To avoid the potential effects on the environment and human health as a result of the

presence of hazardous substances in electrical and electronic equipment, end users

of electrical and electronic equipment should understand the meaning of the

crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal

waste and have to collect such WEEE separately.

Trademarks

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to

numerous hardware and software products by their trade names. In most, if not all cases, these

designations are claimed as trademarks or registered trademarks by their respective companies.

Revision

User’s Manual for PLANET Drawer KVM Console with 17” LCD

Model: DKVM-1700

Rev: 1.1 (March, 2009)

Part No. EM-DKVM1700

Packing List

The complete package consists of:



One 1U 19” rack mount drawer KVM console



Two rails with front and rear bracket



Two brackets A. (Needed for rack depth 828 ~ 1000 mm)



Two brackets B. (Needed for rack depth 504 ~ 614 mm)



Two brackets C. (Needed for rack depth 504 ~ 614 mm)



One 1.8 m KVM cable. (HDDB-15 / VGA + PS/2 x 2)



One AC to DC power adapter



One user’s manual CD



One quick installation guide



Two keys



Six flat screws. (for rail mount to console body)



Eight screws. (for replace long bracket A)

Check to make sure that the unit was not damaged in shipping. If you encounter a

problem, contact your dealer.

Please read this manual thoroughly, and follow the installation and operation

procedures carefully to prevent any damage to the product, and / or any of the

devices that connect to it.

Safety Instructions

1. Please disconnect this equipment from AC outlet before cleaning. Don’t use

liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for

cleaning.

2. For pluggable equipment, the socked-outlet shall be installed near the

equipment and shall be easily accessible.

3. Please keep this equipment from humidity.

4. Lay this equipment on a reliable surface when install. A drop or fall could cause

injury.

5. Do not leave this equipment in an environment unconditioned, storage

temperature above 60

C, it may damage the equipment.

6. The opening on the enclosure is for air convection hence the equipment from

overheating. DO NOT COVER THE OPENING.

7. Make sure the voltage of the power source connect the equipment to the power

outlet.

8. Please keep the power cord such a way that people can not step on it. Do not

place anything over power cord. The power cord must rate for the voltage and

current marked on the product’s electrical ratings label. The voltage and current

rating of the cord should be greater than the voltage and the current rating

marked on the product.

9. All cautions and warning on the equipment should be noted.

10. If the equipment is not in use for long time, disconnect the equipment from mains

to avoid being damaged by transient over-voltage.

11. Never pour any liquid into ventilation openings; this could cause fire or electrical

shock.

12. Never open the equipment. For safety reason, qualified service personnel

should only open the equipment.

13. If one of the following situations arises, get the equipment checked by service

personnel.



The Power Cord or plug is damaged.



Liquid has penetrated into the equipment.



The equipment has been exposed to moisture.



The equipment has not worked well or you can not get it work according to

User’s Manual.



The equipment has dropped and damaged.



If the equipment has obvious signs or breakage.

III

Index of Contents

Packing List ................................................................................................................................................. I

Safety Instructions .....................................................................................................................................II

Index of Contents..................................................................................................................................... III

General Information................................................................................................................... 4

1.1

Feature....................................................................................................................................... 4

1.2 Benefits ...................................................................................................................................... 2

1.3 Advantage ................................................................................................................................. 2

1.4

Product Specification ............................................................................................................... 3

Panel Controls and OSD Function................................................................................................... 4

2.1 Auto Tune .................................................................................................................................. 4

2.2 Input Source.............................................................................................................................. 5

2.3 Brightness.................................................................................................................................. 5

2.4 Contrast ..................................................................................................................................... 6

2.5 Color........................................................................................................................................... 6

2.6 Position ...................................................................................................................................... 7

2.7 Language................................................................................................................................... 8

2.8 Recall ......................................................................................................................................... 8

2.9 Exit.............................................................................................................................................. 9

2.10 Power Indicator ......................................................................................................................... 9

2.11 Login password ......................................................................................................................... 9

Installation ......................................................................................................................................... 10

3.1

Install DKVM-1700 into Cabinet ........................................................................................... 10

3.1.1

Notes.............................................................................................................................10

3.1.2

Hardware Kits Contents .............................................................................................10

3.1.3

Install Console Step....................................................................................................11

3.1.4

Replace longer and shorter bracket step ..............................................................14

3.1.5 Unload Step .................................................................................................................16

3.2 Install Modular KVM Switch Step......................................................................................... 18

3.2.1 Hardware Kits Contents .............................................................................................18

3.2.2 Install Modular KVM Switch Step..............................................................................18

3.3 Installing the Video Card and Video Driver ........................................................................ 19

3.3.1 Configuring the Display Settings..................................................................................19

3.3.2 Connecting the Console................................................................................................21

3.4

Turning on the Console ..................................................................................................... 21

3.5

Testing the Console ........................................................................................................... 21

1. General Information

DKVM-1700 is the drawer KVM with single-rail console design offering industrial

level input solution, which optimizes your space utilization by controlling your

systems in just 1U space on the rack. The separate rail design helps users

install the KVM console more easily. You don’t have to prop the heavy console

during the installation but just lock the rails into the rack and then pull the KVM

console into the rails. With modular design, you can easily integrate different

KVM modules to fit your control system. The DKVM-1700 provides the flexibility

for users to select which KVM module they need for connection.

With the PS/2 KVM Switch module, you can use PS/2 cable either to control

multiple PCs or servers or connect PLANET KVM-800 / KVM-1600 up to 8 tiers.

In this chain, you can control up to 128 PCs or servers with the same console.

The 8/16-port Combo-Free KVM Switch module is also available to fit to most

servers that doesn’t supprot PS/2 interface. With the Combo-Free KVM Switch

module, users can use PS/2 or USB type cables to control multiple PCs or

servers without any concern.

The KVM switch modules are loaded with rich features, such as one local

console port, Daisy chain capability, On Screen Display (OSD) menu, Password

security, Searching PC server name, Hot key control, Push button and

Auto-Scan control, complete keyboard and mouse emulation for simultaneously

PC boot-up processes.

1.1

Feature



Easy to install, single rail design.



Support Sun native resolution



Support 17 various keyboard languages (increasing)



Bright Active TFT display



OSD function for LCD display and KVM switch



Durable keyboard with touchpad



Panel protected by tempered glass



Integration with 4 models of KVM switches



Supports PS/2 and Combo-Free KVM switch module

1.2 Benefits

1. Cost effective solution : With our unique design and all the options, you can

easily suffice the demand for your customer at reasonable cost.

2. Time to serve your customer : With the modular KVM, you can easily turn

single port console into 8 / 16 ports console to serve your customer well.

3. Easy to maintain : Once the defective comes from the KVM switch, you can

just swap the KVM switch module without asking your customer to send the

whole console back to you.

4. Save freight cost : Since you have to keep only 4 models of KVM switch

modules and generate new models by yourself, you can ship all the goods by

sea instead of by air. In case, you run out of the KVM switch stock, it is much

cheaper to ship the KVM switch modules by air.

1.3 Advantage

Easy to install:

With the unique separate rail design. One man can install the KVM console

easily. In case you need to maintain the console, you can easily uninstall without

effecting the server above or below.

Modular KVM switches:

The user can use DKVM-1700 as single port console or through some simple

action and few screws to be 8/16 ports KVM switch.

Various keyboard language support:

to fit the demand of each individual countries.

1.4

Product Specification

Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches

Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches

Net Weight 13 Kg / 28.7 lbs

Gross Weight 20.5 Kg / 45.2 lbs

Display Size 17 inches

Panel Type Active Matrix TFT LCD

Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA)

Pixel Pitch Supports 0.264 mm x 0.264 mm

Viewing Angle (CR>10)

Right-Left view 60°~ 70°(Typ)

Up-Down View 45°~ 60°(Typ)

Contrast Ratio 450 : 1

Brightness White 250 cd/m2

Back Light Four Lamps for Back Light

Supported Colors 16.7M Colors (8-bit with FRC)

Response Time Rising Time 2 ms, Decay Time 14 ms

Operating System

Dos, Windows (3.1, 9x, 2000, NT4, ME, XP, 2003 Server)

Linux, Novell 3.12-6, HP UX, SUN

Multi Platform Support PS/2 and USB

System Cables VGA + PS/2 x 2 or VGA + USB x 1 cable

Keyboard Mouse 106 key PS/2 keyboard with touch pad

Sync 45 ~ 80 KHz

Power Source 100 ~ 240 VAC input

Power Consumption 25W, 19.05W for Panel

Temperature

Operate 0 ~ 50°C / 32 ~ 122°F

Storage -20 ~ 60°C / -4 ~ 140°F

Humidity 10% ~ 90% RH

Chassis Construction Heavy duty steel materials

Keyboard Language

USA, UK, German, French, Spanish, Italian, Portuguese,

Dutch, Swiss, Belgium, Swedish, Norwegian, Danish, Japan,

Taiwan, Russian, Hebrew

Certification CE / FCC, UL / CUL / C-Tick, GOST

Panel Controls and OSD Function

Table 2-1. Panel Controls

Figure 2-1. OSD Control Bar

2.1 Auto Tune

Press the “auto tune” button. The panel will adjust the display size

automatically and also tune the panel to its best condition.

Controls

Description

Soft power on/off button. Adjacent LED is lit when

on.

Auto Auto-synchronize and scale down display to any

valid factory preset timings.

Press to scroll the function you want to adjust.

Menu To access the main menu. This button also acts as

the “Enter” button.

2.2 Input Source

1. Press the “menu” button.

2. Use the “Down” and “Up” button to scroll.

Auto tune.

Input Source

Brightness

Contrast

Color

Position

Language

Recall

Exit

3. Press the“menu”button to enter,and you will see: VGA

4. Use the “Down” and “Up” button to select the input source of signal.

5. Press the “menu” button to enter

2.3 Brightness

1. Press the “menu” button.

2. Use the “Down” and “Up” button to scroll.

Auto tune.

Input Source

Brightness

Contrast

Color

Position

Language

Recall

Exit

3. Press the“menu”button to enter.

4. Use the“Down”and“Up”button to adjust the brightness of the display.

5. Press the “menu” button to enter.

Inhaltsverzeichnis

Andere Planet Networking & Communication LCD-Schublade Handbücher

Planet Networking & Communication

Planet Networking & Communication DKVM-1708 Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Acnodes

Acnodes KD 8228 Bedienungsanleitung

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

Acnodes

Acnodes KDC 81932 Bedienungsanleitung

Acnodes

Acnodes RK1200T Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1701 Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

Acnodes

Acnodes RK 1000B Bedienungsanleitung