Planet NVR-820 Bedienungsanleitung
8/16/32-Ch Network Video Recorder
NVR Series
Quick Installation Guide
Table of Contents
Chapter 1. Introduction .............................................................................................3
1.1 Before Installation............................................................................................3
Chapter 2. Physical Description and Installation ..........................................................4
2.1 NVR-820 / NVR-1620 8/16-Ch Network Video Recorder.....................................4
2.1.1 Package Contents ..................................................................................4
2.1.2 Physical Details......................................................................................4
2.1.3 HDD Installation ....................................................................................6
2.2 NVR-3210 32-Ch Network Video Recorder.........................................................8
2.2.1 Package Contents ..................................................................................8
2.2.2 Physical Details......................................................................................9
2.2.3 HDD Installation .................................................................................. 10
2.3 NVR-3250 32-Ch Rack-mount Network Video Recorder ....................................12
2.3.1 Package Contents ................................................................................ 12
2.3.2 Physical Details.................................................................................... 12
2.3.3 HDD Installation .................................................................................. 14
2.4 NVR-3280 32-Ch Rack-mount Network Video Recorder with 8-bay Hard Disks ..17
2.4.1 Package Contents ................................................................................ 17
2.4.2 Physical Details.................................................................................... 17
2.4.3 HDD Installation .................................................................................. 19
2.5 Web Management.......................................................................................... 22
3
Chapter 1. Introduction
Thank you for purchasing PLANET 8/16/32-Ch Network Video Recorder. The
Network Video Recorder is designed for use within a surveillance system, and
performs recordings and playbacks from network cameras in the system. It is a
recording device using a hard disk drive to record camera pictures instead of using
video tapes so that pictures recorded by repeated overwriting will not experience
deterioration of the recorded picture quality. Up to 8 (for NVR-820), 16 (for NVR-
1620) and 32 (for NVR-3210, NVR-3250 and NVR-3280) cameras can be connected
via a network and it is possible to record their camera pictures. It is possible
to perform the settings or operate the NVR using a web browser installed on a
PC connected to a network, or remote controller. Recorded video can be played
back from remote site via a PC. Up to 4 PCs (web browsers) can access this unit
concurrently and it is possible to perform the settings and operate this unit. The
NVR is compatible with most major brand cameras and its ability to automatically
search and nd the available cameras on the network can greatly reduce the user
effort when expanding the system.
1.1 Before Installation
Before installation, please be sure to read this quick installation guide and user’s
manual (CD) carefully to complete machine installation. This guide shows how to
quickly set up the NVR.
4
Chapter 2. Physical Description and Installation
2.1 NVR-820 / NVR-1620 8/16-Ch Network Video Recorder
2.1.1 Package Contents
1 x NVR 1 x Power Cord 1 x Power Adapter
1 x CD-ROM 8 x HDD Screw 2 x SATA Cable
2 x HDD Bracket 4 x Bracket Screw 1 set x Feet Pad
1 x Quick Installation Guide
2.1.2 Physical Details
Front Panel
NVR-1620
Reset Status
Power
NVR-1620
Network Video Recorder
System Status
USB Port
Reset Button
USB Port
Power Button
NVR-820
Reset Status
Power
NVR-820
Network Video Recorder
System Status
USB Port
Reset Button
USB Port
Power Button
5
Rear Panel
Ethernet
Power
VGA
HDMI
Audio Input / Output
Microphone Input
LED Status Denitions
Power
Green
Solid green indicates normal operation. Slow blinking in
green after pressing and holding the reset button for 5
seconds indicates the device will enter the restore default
process. Other LEDs remain unchanged during this state.
Red System off (with power cord still plugged in)
Amber
Fast blinking in amber indicates the system is initializing/
starting. Continuous blinking indicates the system is unable
to start properly (All other LEDs should be off when this
LED is blinking in amber). Slow blinking indicates the
system is shutting down.
Buttons Status Denitions
Power On Press and hold for 2 seconds
Off Press and hold for 2 seconds
Reset
Restore
default Press and hold for 5 seconds
Restart Press and hold for 2 seconds
Buzzer Status Denitions
Beep
Complete
start Beeping once indicates the system is fully started.
Initiating
restart Beeping once indicates the restart process has begun.
Initiating
shutdown
It beeps once during the shutdown process after releasing
the power button.
6
2.1.3 HDD Installation
1. Remove the screws on back side.
2. Remove the top case by pulling it toward you.
3. Prepare HDD brackets.
7
4. Fix the HDD on bracket with screws; you can install two HDDs with brackets.
5. Prepare SATA cable and install it on SATA data connector and SATA power
connector.
8
6. Install SATA cable on the HDD.
7. Fix HDD brackets on system with screws.
2.2 NVR-3210 32-Ch Network Video Recorder
2.2.1 Package Contents
1 x NVR 1 x Power Cord 1 x RJ45 Cable
1 x CD-ROM 12 x HDD Screw 1 x Quick Installation Guide
4 x HDD Tray Key
9
2.2.2 Physical Details
Front Panel
Reset/Restart Button
Power LED
Power Button
Event LED
USB
System LED
LEDs Color Description
System Amber
Firmware upgrade: blinking
System failure (AP failed): off
System normal: solid
Event Amber Event recording: solid
No event: off
Power Blue Power on/Restart/Reset to default/OS failed: solid
Button Description
Reset/Restart
Press and release for restart.
Press over 3 seconds to reset to default settings. Don't release
the button until the system LED blinks.
Power Press to start or shut down.
10
Rear Panel
Ethernet
VGA
USB
E-SATA
Audio
Connector Description
USB Connect your USB ash disk for rmware upgrade and backup
VGA VGA output
E-SATA External E-SATA HDD
Ethernet 10/100/1000Mbps network
Audio Line in / Line out / Mic.
2.2.3 HDD Installation
1. Release the HDD tray by pulling the lock to the right.
Andere Handbücher für NVR-820
3
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Planet Netzwerk-Hardware Handbücher
Planet
Planet WBS-512AC Bedienungsanleitung
Planet
Planet NVR-401 Bedienungsanleitung
Planet
Planet GRT-101 Bedienungsanleitung
Planet
Planet IVS-100 Bedienungsanleitung
Planet
Planet HPOE-2400G Bedienungsanleitung
Planet
Planet NVR-820 Bedienungsanleitung
Planet
Planet PL-103E Bedienungsanleitung
Planet
Planet BM-2010 Bedienungsanleitung
Planet
Planet GRT-101 Bedienungsanleitung
Planet
Planet POE-151S Bedienungsanleitung
Planet
Planet NVR-400 Bedienungsanleitung
Planet
Planet NVR-810 Bedienungsanleitung
Planet
Planet NAS-7450 Bedienungsanleitung
Planet
Planet NVR-420 Bedienungsanleitung
Planet
Planet IEEE 802.3at Bedienungsanleitung
Planet
Planet NVR-3210 Bedienungsanleitung
Planet
Planet IVS-H125 Bedienungsanleitung
Planet
Planet NVR-400 Bedienungsanleitung
Planet
Planet IPOE-171-60W Bedienungsanleitung
Planet
Planet IKVM-8000 Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
